A 2WD or 4WD compact utility tractor from the 70 Compact series is the John Deere 1070.
From 1989 to 1998, Yanmar produced this tractor in Japan for distributor John Deere. A 1.9 L (116.3 cu in) four-cylinder diesel engine, a partially synchronized transmission with 9 forward and 2 reverse gears, and a dry disc clutch are all included in the John Deere 1070.
The Yanmar 4TN84 engine was utilized by the JD 1070 compact utility tractor.
It has a 1.9 L, 1,906 cm2 (116.3 cu in), four-cylinder natural aspirated diesel engine with cylinder bore and stroke measurements of 84.0 mm (3.31 in) and 86.0 mm (3.39 in), respectively. 17.8:1 is the compression ratio rating.
At 2,600 rpm, its engine generated 39 PS (28.7 kW; 38.5 HP) of output power.
Power steering, differential wet disc brakes, two-post ROPS with canopy, and a fuel tank capacity of 40.1 liters (10.6 US gal; 8.8 Imp. gal) are all included in the John Deere 1070.
Contents
John Deere 1070 Price
Original Price: $18,000 (1998)
John Deere 1070 Hp
38.5 hp 28.7 kW
John Deere 1070 Oil Capacity
5.6 qts 5.3 L
John Deere 1070 Weight
2980 to 3265 pounds
John Deere 1070 Serial Numbers
- 1989: 001001
- 1990: 001338
- 1991: 100001
- 1992: 115001
- 1993: 120001
- 1994: 130001
- 1995: 140001
- 1996: 150001
- 1997: 160001
- 1998: 170001
John Deere 1070 Specs
ENGINE
| Engine Model | Yanmar 4TN84 |
| Engine Type | 4 Cycle 4-cylinder direct injection diesel |
| Number of Cylinders | 4 |
| Displacement, cu in (L) | 116.3 (1.91) |
| Engine Bore, in (mm) | 3.31 (84.0) |
| Engine Stroke, in (mm) | 3.39 (86.0) |
| Aspiration | Natural |
| Rated Engine Power, hp (kW) | 38.5 (28.7) |
| Rated Engine Speed, rpm | 2600 |
| Idle Speed, rpm | 800-2875 |
| Compression Ratio | 17.8:1 |
| Firing Order | 1-3-4-2 |
| Combustion System | Direct Injection |
| Fuel Tank Capacity, gal (L) | 10.5 (40.0) |
| Oil Capacity, qts (L) | 5.6 (5.3) |
| Coolant Capacity, qts (L) | 6.1 (5.8) |
| Electrical System Rating, Volts | 12 |
| Alternator Rating, Amps | 20/35 |
| Battery CCA | 550 |
POWER TAKE-OFF
| Rear PTO Operational Type | Live (2-stage clutch) |
| PTO Horsepower, hp (kW) | 35.0 (26.1) |
| Rear PTO Speed, rpm | 540 |
| Mid-PTO | Optional |
| Mid-PTO Speed, rpm | 2100 |
TRANSMISSION
| Transmission Type | Partially synchronized |
| Gearbox Type | 9F/2R |
| Number of Forwarding Gears | 9 |
| Number of Reverse Gears | 2 |
| Clutch Type | Dry type |
| Oil Capacity, qts (L) | 22.0 (20.8) |
| Maximum Forward Speed, mph (kph) | 12.3 (19.8) |
| Maximum Reverse Speed, mph (kph) | 4.8 (7.7) |
WHEELS AND TIRES
| Drive Wheels | 2WD/4WD |
| Steering Configuration | Front steer |
| Steering System | Power |
| Service Brake | Differential wet disc |
| Front Tire Size (2WD) | 6.0-16 |
| Rear Tire Size (2WD) | 13.6-24 |
| Front Tire Size (4WD) | 8.0-16 |
| Rear Tire Size (4WD) | 13.6-28 |
| Front Tire Size (Turf) | 27×8.50-15 |
| Rear Tire Size (Turf) | 44×18.00-20 |
| Front Tread (2WD), in (mm) | 55.9-75.9 (1410-1920) |
| Front Tread (4WD), in (mm) | 49.2 (1240) |
| Rear Tread, in (mm) | 51.2-71.1 (1300-1800) |
HYDRAULIC SYSTEM
| Hydraulic System Type | Open center |
| Implement Pump Flow, gpm (Lpm) | 9.0 (34.2) |
| Hydraulic Pressure, Bar (psi) | 155 (2250) |
| Hydraulic Capacity, gal (L) | 5.5 (20.8) |
| 3-Point Hitch Category | 1 |
| Draft Sensing or Lift Control | Load and depth control |
| Standard Lift Capacity at lift pin, lb (kg) | 2020 (916) |
DIMENSIONS AND WEIGHT
| Wheelbase, in (mm) | 68.9 (1750) |
| Length, in (mm) | 123 (3120) |
| Height (Hood), in (mm) | 52.2 (1320) |
| Height (ROPS), in (mm) | 83.7 (2120) |
| Width, in (mm) | 64.8 (1640) |
| Ground Clearance (2WD), in (mm) | 13.6 (340) |
| Ground Clearance (4WD), in (mm) | 15.6 (390) |
| Weight (2WD), lb (kg) | 2980 (1350) |
| Weight (4WD), lb (kg) | 3265 (1480) |
John Deere 1070 Review
John Deere 1070 Attachments
72.8″ Mower deck |
|
| Type | mid-mount John Deere 72 |
| 3-blade with a hydraulic lift | |
| Cutting width | 72.8 inches 184 cm |
| Weight | 448 lbs 203 kg |
| Overall width | 85 inches 215 cm |
| Cut height | 1.5 to 8.6 inch 3 to 21 cm |
John Deere 8A Backhoe |
|
| Backhoe type | John Deere 8A Backhoe |
| Weight | 1243 lbs 563 kg |
| Transport height | 81 inches 205 cm |
| Bucket width | 12 inches 30 cm |
| 18 inches 45 cm |
|
| 24 inches 60 cm |
|
| 36 inches 91 cm |
|
| 2-Foot flat digging depth | 102 inches 259 cm |
| Reach from pivot | 133 inches 337 cm |
| Loading height | 82 inches 208 cm |
| Bucket Rotation | 180° |
| Swing Arc | 180° |
| Bucket force | 2992 lbs 1357 kg |
| Dipperstick force | 1995 lbs 904 kg |
John Deere 8B Backhoe |
|
| Backhoe type | John Deere 8B Backhoe |
| Weight | 1260 lbs 571 kg |
| Transport height | 81 inches 205 cm |
| Bucket width | 12 inches 30 cm |
| 18 inches 45 cm |
|
| 24 inches 60 cm |
|
| 36 inches 91 cm |
|
| 2-Foot flat digging depth | 102 inches 259 cm |
| Reach from pivot | 133 inches 337 cm |
| Loading height | 82 inches 208 cm |
| Bucket Rotation | 180° |
| Swing Arc | 180° |
| Bucket force | 3389 lbs 1537 kg |
| Dipperstick force | 2213 lbs 1003 kg |
John Deere 1070 Problems
- ENGINE TROUBLESHOOTING
- ELECTRICAL SYSTEM TROUBLESHOOTING
- TRANSMISSION TROUBLESHOOTING
- HYDRAULICS TROUBLESHOOTING
- STEERING SYSTEM TROUBLESHOOTING
The John Deere 1070 Tractor Price, Specs, Review, Attachments, and Features are all that are necessary to know.
However, if you have any issues with this post, do leave a remark in the space provided below. I’ll do my best to find a quick solution to your issue. Thanks.
John Deere 1070 FAQ
How many HP is a John Deere 1070?
38.5 hp 28.7 kW
What year is a 1070 John Deere?
1989-1998
How much oil does a John Deere 1070?
5.6 qts 5.3 L