John Deere 110 backhoe loader specifications, Price and review 2022

The John Deere 110 backhoe loader was produced between 2000 between 2000 and 2012. In 2012, the John Deere 110TLB is powered by a 133.6 cu.in (2.2L) Yanmar 4TNV88 four-cylinder, 8-valve diesel engine, which is liquid-cooled.

It has a an rated power at 43.3 HP (32.4 kW) equivalent to 121.8 cu.in (2L) Yanmar 4TNE84, a direct injection 4-cylinder diesel engine that is liquid-cooled and has the power rating of 43 HP (32.1 4 kW).

The John Deere 110 backhoe loader equipped with a three-range hydrostatic transmission that has infinite reverse and forward gears. 

Maximum forward speed is 16.2 miles per hour (26.1 km/h) and the maximum reverse speed is 16.2 2 mph (26.1 kilometers/hour). This open-center hydraulics system utilized gear pumps with a fluid flow rates of 16.3 GPM (61.5 LPM) for backhoes and 12.2 GPM (46.1 per minute) for the loader. 

Pressure in the hydraulic system is 3000 PSI (207 bars). The John Deere 110 comes equipped with 10×16.5 front tyre as well as 17.5Lx24 back tyres. The wheel’s base is 60″ (1520 millimeters).

The maximum lift height for the loader is 115″ (2920 mm) at pin and a clearance with bucket dumped is 88″ (2235 millimeters). 

The capacity of the lift is 2727 pounds (1237 kilograms) at its maximum level (bucket pin) and the that of the boom breakout force is 3965 pounds (1800 kilograms). 

Its 72″ (1825 millimeter) normal material bucket comes with an approximate heaped capacity of 17.5 cu.ft (0.5 millimeters).

John Deere 110 backhoe

John Deere 110 backhoe Price

Price: $35,000 USD

John Deere 110 backhoe Specification

YANMAR 4TNV88 ENGINE

Engine Model Yanmar 4TNV88
Engine Type Four-cylinder 8-valve liquid-cooled diesel
Number of Cylinders 4
Displacement, cu in (L) 133.6 (2.19)
Engine Bore, in (mm) 3.47 (88.0)
Engine Stroke, in (mm) 3.54 (90.0)
Aspiration Natural
Rated Engine Power, hp (kW) 43.3 (32.4)
Rated Engine Speed, rpm 2600
High Idle Speed, rpm 3200
Compression Ratio 19.0:1
Firing Order 1-3-4-2
Fuel System Direct injection
Fuel Injection Pump Mechanical
Fuel Filter Replaceable element
Lubrication System Forced with trochoid pump
Cooling System Liquid-cooled with radiator
Air Cleaner Dry, replaceable dual element
Valve Clearance (Intake), in (mm) 0.006-0.010 (0.15-0.25)
Valve Clearance (Exhaust), in (mm) 0.010-0.014 (0.25-0.35)
Fuel Tank Capacity, gal (L) 15.3 (58.0)
Engine Oil Capacity, qt (L) 5.0 (4.7)
Cooling System Capacity, qt (L) 10.0 (9.5)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 40/55

YANMAR 4TNE84 ENGINE

Engine Model Yanmar 4TNE84
Engine Type Vertical four-stroke water-cooled diesel
Number of Cylinders 4
Displacement, cu in (L) 121.8 (2.00)
Engine Bore, in (mm) 3.31 (84.0)
Engine Stroke, in (mm) 3.54 (90.0)
Aspiration Naturally aspirated
Rated Engine Power, hp (kW) 43.0 (32.1)
Rated Engine Speed, rpm 2600
Idle Speed, rpm 1050-2800
Compression Ratio 18.0:1
Firing Order 1-3-4-2
Fuel System Direct injection
Fuel Pump In-line with electric shutoff
Fuel Filter Replaceable element
Lubrication System Forced with trochoid pump
Cooling System Liquid-cooled with radiator
Air Cleaner Dry type with safety element
Fuel Tank Capacity, gal (L) 15.3 (58.0)
Engine Oil Capacity, qt (L) 5.2 (4.9)
Cooling System Capacity, qt (L) 9.2 (8.7)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 40

POWER TAKE-OFF

PTO Operational Type Independent
PTO Horsepower (4TNV88 Engine), hp (kW) 33.3 (24.8)
PTO Horsepower (4TNE84 Engine), hp (kW) 33.0 (24.5)
PTO Clutch Wet Disc
PTO Speed, rpm 540

TRANSMISSION

Transmission Type Hydrostatic
Number of Forward Gears Infinite
Number of Reverse Gears Infinite
Number Of Ranges 3
Oil Capacity, qts (L) 39.2 (37.0)
Maximum Forward Speed, mph (kph) 16.2 (26.1)
Maximum Reverse Speed, mph (kph) 16.2 (26.1)

WHEELS AND TIRES

Drive Wheels 4WD 4×4
Steering Configuration Front steer
Steering System Power, cylinder-assisted
Brakes Type Wet Disc
Front Tire Size 10.0×16.5
Rear Tire Size 17.5Lx24

HYDRAULIC SYSTEM

Hydraulic System Type Open Center
Implement Pump Flow (Loader), gpm (Lpm) 12.2 (46.1)
Implement Pump Flow (Backhoe), gpm (Lpm) 16.3 (61.5)
Steering Pump Flow, gpm (Lpm) 6.0 (22.5)
Hydraulic Pressure, Bar (psi) 207 (3000)
Hydraulic Fluid Capacity, gal (L) 15.0 (57.0)
3-Point Hitch Category 1
Standard Lift Capacity at 24″ (610mm) behind pin, lb (kg) 2500 (1135)
Standard Lift Capacity at pin, lb (kg) 3130 (1420)

DIMENSIONS AND WEIGHT

Wheelbase, in (mm) 60 (1520)
Length (with Loader/Backhoe), in (mm) 296 (7515)
Height, in (mm) 101 (2565)
Overall Width, in (mm) 86 (2185)
Turning Radius (with Brakes), in (mm) 124 (3150)
Turning Radius (w/o Brakes), in (mm) 144 (3660)
Weight (Tractor Only), lb (kg) 5165 (2350)
Weight (with Loader/Backhoe), lb (kg) 7600 (3450)

FRONT END LOADER

Bucket Width, in (mm) 72 (1825)
Maximum Lift Height to Pivot Pin, in (mm) 115 (2920)
Clearance with Bucket Level, in (mm) 105 (2665)
Clearance with Bucket Dumped, in (mm) 88 (2235)
Reach at Maximum Lift Height, in (mm) 25 (635)
Reach with Bucket on Ground, in (mm) 73 (1850)
Maximum Dump Angle, deg 45
Digging Depth, in (mm) 6 (152)
Maximum Rollback Angle, deg 45
Overall Height in Carrying Position, in (mm) 62 (1575)
Lift Capacity to Maximum Height at Pivot Pin, lb (kg) 2727 (1237)
Lift Capacity to 1.5m (59″) at Pivot Pin, lb (kg) 3135 (1421)
Breakout Force at Pivot Pin, lb (kg) 3965 (1800)
Breakout Force at 0.5m (19.7″) Forward of Pivot Pin, lb (kg) 3135 (1421)
Bucket Rollback Force at Maximum Height, lb (kg) 2970 (1350)
Bucket Rollback Force at 1.5m (59″) Lift Height, lb (kg) 4640 (2110)
Bucket Rollback Force at Ground Level, lb (kg) 4855 (2205)
Loader Weight, lb (kg) 830 (375)

BACKHOE

Operating Height Fully Raised, in (mm) 158 (4015)
Overall Transport Length, in (mm) 245.5 (6235)
Backhoe Transport Height, in (mm) 107.3 (2725)
Backhoe Bucket Widths, in (mm) 12, 18, 24 (305, 455, 610)
Maximum Digging Depth, in (mm) 121 (3070)
2-ft Flat Digging Depth, in (mm) 119 (3020)
8-ft Flat Digging Depth, in (mm) 102.2 (2595)
Reach from Swing Pivot, in (mm) 160 (4065)
Loading Height, in (mm) 101.3 (2570)
Loading Reach, in (mm) 65.1 (1655)
Stabilizer Spread (Operating), in (mm) 98 (2490)
Stabilizer Spread (Transport), in (mm) 66.1 (1640)
Boom Swing Arc, deg 180
Backhoe Bucket Rotation, deg 190
Stabilizer Arm Leveling Angle, deg 12
Stabilizer Angle Rearward, deg 18
Bucket Cylinder Digging Force, lb (kg) 5723 (2600)
Crowd Cylinder Digging Force, lb (kg) 3764 (1710)
Maximum Boom Lifting Capacity at Ground, lb (kg) 1216 (550)
Stabilizer Lift Capacity at Ground, lb (kg) 9950 (4513)
Backhoe Weight, lb (kg) 1755 (795)

John Deere 110 Backhoe Weight

John Dere 110 backhoe Max Weight is 7279.7 lbs (3,302 kg)

John Deere 110 Backhoe Reviews

Conclusion

John Deere 110 backhoe is popular for large farms. This powerful tractor features a John Deere diesel engine of 142 HP, three transmissions, and many other great features. 

This article contains all information you need about the row crop tractor.

John Deere 110 backhoe FAQ

What does a John Deere 110 backhoe weight?

John Deere 110 backhoe Max Weight is 7279.7 lbs (3,302 kg)

What horsepower is a John Deere 110?

John Deere 110 backhoe engine produces 7 hp 5.2 kW

What year was the John Deere 110 made?

John Deere 110 backhoe made in 1963

How wide is a John Deere 110?

John Deere 110 backhoe Wheelbase is 44 inches 111 cm, Length is 63 inches 160 cm, Width is 34.5 inches* 87 cm, and Height is 38.75 inches 98 cm.