John Deere 2032R is a compact 4WD utilitarian tractor of the 2R series. The tractor was produced in the US by John Deere in Augusta, Georgia, the USA from 2013 until 2019.
The first generation was produced between 2013 and the year 2016. Its model 2032R was equipped with the 1.6 L (100.0 cu*in) three-cylinder diesel engine, as well as an electrostatic transmission that is unlimited (2-range) back and forwards gears.
It was a compact utility tractor that was powered by a three-cylinder Yanmar engine. It’s a 1.6 L 1,638 cm 2, (100.0 cu*in) three-cylinder natural aspirated diesel engine that has 88.0 millimeters (3.46 inches) of the bore of the cylinder and 90.0 millimeters (3.54 inches) of the stroke of the piston.
The compression ratio is 19.1:1. The engine produced 32.5 PS (23.9 kW or 32.0 HP) at the rate of 2,500 rpm.
It is the John Deere 2032R that comes with power steering with wet disc brakes, ROPS that fold into two posts, and 27.0 Liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.
Also, Find Here
- price of john deere tractors
- john deere x590 problems
- john deere 8400r price
- john deere d105 for sale craigslist
- john deere d125 price used
Contents
John Deere 2032r Price
John Deere 2032R Original Price: $19,339
John Deere 2032r Specification
Engine
| Engine Model | Yanmar 3TNV88 |
| Engine Type | 4-cycle three-cylinder direct injection liquid-cooled diesel |
| Number of Cylinders | 3 |
| Displacement, cu in (L) | 100.2 (1.642) |
| Engine Bore, in (mm) | 3.47 (88.0) |
| Engine Stroke, in (mm) | 3.54 (90.0) |
| Aspiration | Naturally aspirated |
| Maximum Engine Power, hp (kW) | 32.0 (23.9) |
| Rated Engine Speed, rpm | 2500 |
| Low Idle Speed, rpm | 1000 |
| High Idle Speed, rpm | 2650 |
| Maximum Torque, Nm (lb-ft) | 110.5 (81.8) |
| Torque Speed, rpm | 1600 |
| Compression Ratio | 19.1:1 |
| Firing Order | 1-3-2 |
| Fuel System | Direct injection |
| Lubrication System | Forced lubrication with trochoid pump |
| Oil Filter Type | Single element |
| Air Cleaner | Dual dry element |
| Emission Level | Tier 4 |
| Fuel Tank Capacity, gal (L) | 7.1 (27.0) |
| Oil Capacity, qts (L) | 3.6 (3.4) |
| Coolant Capacity, qts (L) | 4.2 (4.0) |
| Electrical System Rating, Volts | 12 |
| Charging System | Alternator |
| Alternator Rating, Amps | 40 |
Power Take Off
| PTO Operational Type | Independent |
| PTO Horsepower, hp (kW) | 23.5 (17.5) |
| PTO Clutch | Wet disc |
| Rear PTO Speed, rpm | 540 |
| Mid PTO Speed, rpm | 2000 |
Transmission
| Transmission Type | Hydrostatic |
| Number of Forward Gears | Infinite (2-range) |
| Number of Reverse Gears | Infinite (2-range) |
| Cruise Control | Standard |
| Oil Capacity, qts (L) | 18.6 (17.5) |
| Maximum Forward Speed (Low Range), mph (kph) | 4.7 (7.6) |
| Maximum Forward Speed (High Range), mph (kph) | 13.7 (21.9) |
| Maximum Reverse Speed (Low Range), mph (kph) | 4.7 (7.6) |
| Maximum Reverse Speed (High Range), mph (kph) | 13.2 (21.1) |
Wheel And Tires
| Drive Wheels | 4WD 4×4 |
| Steering Configuration | Front steer |
| Steering System | Power Steering |
| Brakes Type | Wet disc |
| Front Tire Size (AG) | 7.00×12 |
| Rear Tire Size (AG) | 12.4×16 |
| Front Tire Size (Turf) | 24×8.5-14 |
| Rear Tire Size (Turf) | 36×14.00-15 |
| Front Tire Size (Industrial) | 23×8.50-14 |
| Rear Tire Size (Industrial) | 14-17.5 |
| Front Tread, in (mm) | 32.7 (830) |
Hydraulic System
| Hydraulic System Type | Open center |
| Implement Pump Type | Gear |
| Implement Pump Flow, gpm (Lpm) | 5.0 (19.0) |
| Steering Pump Flow, gpm (Lpm) | 4.0 (15.0) |
| Hydraulic Pressure, Bar (psi) | 172 (2500) |
| Hydraulic Fluid Capacity, gal (L) | 3.9 (14.8) |
| Number of Standard Remote Valves | 0/3 |
| 3-Point Hitch Category | 1 |
| Draft Sensing or Lift Control | Position control |
| Standard Lift Capacity at 24″ (610mm) behind pin, lb (kg) | 1250 (567) |
| Standard Lift Capacity at pin, lb (kg) | 1435 (650) |
Dimension And Weight
| Wheelbase, in (mm) | 65.2 (1655) |
| Overall Length, in (mm) | 108.9 (2766) |
| Height (Hood), in (mm) | 53.3 (1350) |
| Height (ROPS), in (mm) | 89.7 (2279) |
| Overall Width, in (mm) | 55.6 (1412) |
| Ground Clearance, in (mm) | 13 (330) |
| Weight (ROPS), lb (kg) | 1973 (895) |
Front End Loader
| Loader Model | John Deere H130 |
| Maximum Lift Height at Pin, in (mm) | 78.5 (1990) |
| Reach at Maximum Height, in (mm) | 25.8 (655) |
| Maximum Dump Angle, deg | 38 |
| Maximum Rollback Angle, deg | 25 |
| Lift Capacity to Max Height at Pin, lbs (kg) | 1027 (465) |
| Lift Capacity to Max Height at 19.7″ (0.5m) Ahead of Pin, lbs (kg) | 717 (327) |
| Breakout Force at Pivot Pin, lbs (kg) | 2363 (1070) |
| Breakout Force at 19.7″ (0.5m) Ahead of Pin, lbs (kg) | 1604 (729) |
| Bucket Widths, in (mm) | 49 (1240) or 53 (1340) |
John Deere 2032r Attachments
- Mid-mount John Deere 62D: 1,570 mm (62 in) mower deck
- Mid-mount John Deere: 1,820 mm (72 in) mower deck
- Front-mount John Deere: 1,370 mm (52 in) blade
- Front-mount John Deere: 1,370 mm (52 in) two-stage snowblower
- John Deere H130 loader
- John Deere 46 backhoe
John Deere 2032r Review
John Deere 2032r Problems
- Engine Won’t Start
- Engine or Transmission Overheats
- Steering Difficulties
- Engine Stalls
- Low Engine Power
John Deere 2032r Weight
1306 kg 2879 lb
John Deere 2032r Loader Lift Capacity
615 kg 1356 lb
Based on my research, all information is real and reliable. We hope you enjoy this article. If there is any issue with this article, then contact me via the comment section, and I’ll resolve your issue as quickly as possible. Thank you for visiting our website and stay in touch for content similar to this.
I am Dipak Salvi. I’ve been a blogger since 2010, and I love to write. I really like to write about cars, technology, and money. I also write about fitness and health. I run a lot of blogs, such as https://commercialvehicleinfo.com. You can contact me at [email protected]