It is the John Deere 2038R is a compact 4WD utilitarian tractor of the 2R series. This tractor has been produced through John Deere in Augusta, Georgia, the USA since 2017.
The JD 2038R comes with a 1.6 L turbocharged diesel three-cylinder engine as well as a hydrostatic transmission that has endless forward and reverse gears.
John Deere 2038R compact utility tractor utilized the Yanmar 3TNV88C NJT engine. It’s an 1.6 L 1,568 cm 2, (95.7 cu*in) three-cylinder turbocharged diesel engine.
It has 86.0 millimeters (3.39 inches) of bore diameter and 90.0 millimeters (3.54 inches) of the stroke of the piston.
The compression ratio is 19.1:1. The engine generated 37.8 PS (27.8 kW; 37.3 HP) at 2,500 rpm of output as well as 101.4 N*m (10.3 kg*m, 74.7 ft*lb) of torque.
The 2038R John Deere comes powered by power steering and wet disc brakes. ROPS with two posts that fold up and 32.2 Liters (8.5 US gal.; 7.1 Imp. gal) fuel tank.
Contents
John Deere 2038r Price
$30,640.00 USD, PLUS ADDITIONAL CHARGES
John Deere 2038r Specs
Engine
| Manufacturer | Yanmar |
| Engine model | 3TNV88C-NJT |
| Engine power (gross) | SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
| Power take-off (PTO) power | 22.7 kW 30.4 hp |
| Rated engine speed | 2500 rpm |
| Type | Direct Injection |
| Injection pump type | Direct Injection |
| Aspiration | Turbocharged |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Three cylinders: 1.568 L 95.8 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 86×90 mm 3.39×3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 104.7 Nm 77.2 lb-ft |
| Fuel tank capacity | 32 L 8.5 U.S. gal. |
Electrical
| Battery size | 500 CCA |
| Alternator (12-V) | 85 amp |
| Starter size | 1.4 kW 1.9 hp |
Fuel System
| Type | Direct Injection |
Transmission
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Final drive | Spur gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle capacity | Front 880 kg 1940 lb Rear 1800 kg 3968 lb |
| Creeper | No |
| Cruise control | Standard |
| Differential lock | Yes |
Hydraulics
| Type | Open center |
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure | 172 bar 2495 psi |
| Draft control sensing | Position control |
| Remote control valves are available | Up to three |
3-Point Hitch
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Power Take Off
| Standard | Rear: 543 rpm Mid: 1998 rpm |
| Control | Independent |
| Clutch | Wet disc |
| Brake (for mid and rear PTO) | Wet disc |
Fluid Capacities
| Crankcase with filter | 4.5 L 4.8 qt |
Final Drive
| Type | Spur Gear |
| Differential lock | Yes |
Dimensions
| Wheelbase | 1723 mm 67.8 in. |
| Turning radius with brakes | 2.46 m 8.07 ft |
| Approximate shipping weight (open-station; cab) | Open station: 1320 kg 2910 lb Cab: Not applicable |
Miscellaneous
| Toolbox | Yes |
| Tilt steering wheel | Yes |
| 12-V Outlet | Yes |
John Deere 2038r Attachments
| Attachment overview | |
| 60″ mid-mount mower deck | |
| 72″ mid-mount mower deck | |
| Front-end loader | |
| Backhoe |
60″ Mower deck |
|
| Type: | mid-mount John Deere |
| Cutting width: | 60 inches 152 cm |
72″ Mower deck |
|
| Type: | mid-mount John Deere |
| Cutting width: | 72 inches 182 cm |
John Deere 220R Loader |
|
| Height (to pin): | 85 inches 215 cm |
| Clearance, dumped bucket: | 66 inches 167 cm |
| Dump reach: | 30 inches 76 cm |
| Dump angle: | 36° |
| Clearance, level bucket: | 79 inches 200 cm |
| Reach at the ground: | 51 inches 129 cm |
| Breakout force (at pin): | 1949 lbs 884 kg |
| Breakout force (at 500mm): | 1360 lbs 616 kg |
| Breakout force (bucket): | 2138 lbs 969 kg |
| Lift to full height (at pin): | 1120 lbs 508 kg |
| Lift to full height (at 500mm): | 803 lbs 364 kg |
| Lift to 1.5m (at pin): | 1269 lbs 575 kg |
| Lift to 1.5m (at 500mm): | 979 lbs 444 kg |
| Bucket width: | 49 inches 124 cm |
| 53 inches 134 cm |
|
| 57 inches 144 cm |
|
John Deere 2038r Width
Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.) Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
John Deere 2038r Lift Capacity
615 kg 1356 lb
John Deere 2038r Horsepower
36.7 hp
According to my research above, all information is authentic and trustworthy, I We hope that you will enjoy this article.
If there is any issue with this article, you can let me know via the comment box, and I’ll resolve your issue as quickly as I can. Thanks for stopping by our website and stay in touch for content similar to this.