Contents
John Deere 2210 Specs, Features, Weight, Attachments, Price & Review
From 2003 until 2006, John Deere produced the 4WD John Deere 2210 in Augusta, Georgia, in the United States.
The JD 2210 has a 1.0 L three-cylinder diesel engine with an unlimited (2-range) forward and reverse gear hydrostatic transmission.
The Yanmar 3TNE74 engine was utilized by the JD 2210 subcompact utility tractor. It is a three-cylinder, 1 L, 1,001 cm2, (61.1 cu in), naturally aspirated diesel engine with a bore and stroke measurement of 74.0 mm (2.91 in) and 78.0 mm (3.07 in), respectively.
The rating for compression is 23.5:1. The maximum output power of this engine was 23.4 PS (17.2 kW; 23.0 HP) at 3,000 rpm.
The John Deere 2210 has a 19.0 liter (5 US gal; 4.2 Imp. gal) fuel tank, wet disc brakes, an open operator station, and two-post ROPS.
John Deere 2210 Tractor Price
Original Price: $10,900.00 USD
john deere 2210 weight
1400 lbs 635 kg
John Deere 2210 Tractor Serial Numbers
- 2003: 2100001
- 2004: 3100001
- 2005: 4310001
John Deere 2210 Specs
Make | John Deere |
Model | 2210 |
Company Country | United States |
Production years | From 2003 Until 2006 |
Tractor type | Sub Compact Utility tractor |
Fuel | diesel |
Price | – |
Total build | – |
Engine size | 61.4 ci or 1.0 L |
Number of cylinders | 3 cylinders |
Horsepower | 22.5 hp or 16.8 kW |
Power RPM | 3000 (rpm) |
Engine torque | – |
Engine torque RPM | – |
Fuel type | diesel |
Fuel injection system | indirect injection |
Fuel tank capacity | 5 gal or 18.9 L |
Compression ratio | 23.5:1 |
Bore stroke | 2.91×3.07 inches or (74 x 78 mm) |
Oil tank capacity | 2.1 qts or 2.0 L |
Coolant tank capacity | 3.1 qts or 2.9 L |
Transmission type | hydrostatic |
Transmission gears | infinite (2-range) forward and reverse |
Oil tank capacity | 13.6 qts or 12.9 L |
Hydraulic system | open center |
Pump flow rate | 3 gpm or 11.4 lpm |
Steering flow rate | 2.5 gpm or 9.5 lpm |
Hydraulic tank capacity | 3.4 gal or 12.9 L |
Hydraulic pressure | 1987 psi or 137.0 bar |
Hydraulic max flow | 5.5 gpm or 20.8 lpm |
Hitch control system | – |
Rear hitch | I |
Rear hitch lift | 700 lbs or 317 kg |
AG front tires | 18×8.50-10 |
AG rear tires | 26×12.00-12 |
Lawn front tires | 18×8.50-10 |
Lawn rear tires | 26×12.00-12 |
Industrial front tires | 18×8.50-10 |
Industrial rear tires | 26×12.00-12 |
Weight | 1400 lbs or 635 kg |
Length | 104 inches [264 cm] |
Width | 47.9 inches [121 cm] |
Height | 78.6 inches [199 cm] |
Wheelbase | 57 inches [144 cm] |
Ground clearance | – |
Rear tread size | 35.3 inches |
Front tread size | 31.1 inches |
Number of batteries | 1 |
Battery voltage | 12 V |
Battery cold cranking Amps | 435 |
Electric ground force | negative |
Electric charging system | alternator |
Electric charging Amps | 20 amps |
Starter motor | electric |
Engine starter volts | 12 V |
Wheel drive | 4×4 MFWD 4WD |
Final drive system | spur gear |
Steering system | power |
Braking system | – |
Cabin type | Two-post fixed ROPS |
Differential lock | mechanical rear |
PTO claimed power | 17.7 hp or 13.2 kW |
PTO clutch system | hydraulic wet disc |
Rear PTO system | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO system | – |
Mid-PTO system | independent |
Mid PTO RPM | 2100 (rpm) |
PTO fuel consumption | – |
John Deere 2210 Tractor Review
John Deere 2210 Attachments
54″ Mower deck |
|
Type: | mid-mount John Deere 54C |
3-blade | |
Cutting width: | 54 inches 137 cm |
Belt: | shaft-driven |
62″ Mower deck |
|
Type: | mid-mount John Deere 62C |
3-blade | |
Cutting width: | 62 inches 157 cm |
Belt: | shaft-driven |
Blade |
|
Type: | front-mount John Deere |
Width: | 54 inches 137 cm |
Lift height: | 11 inches 27 cm |
Cut depth: | 3.5 inches 8 cm |
Weight: | 50 lbs 22 kg |
46″ Snowblower |
|
Type: | front-mount John Deere |
single-stage | |
Clearing width: | 46 inches 116 cm |
Clearing height: | 12 inches 30 cm |
Weight: | 250 lbs 113 kg |
Overall width: | 47.5 inches 120 cm |
John Deere 210 Loader |
|
Height (to pin): | 68.5 inches 173 cm |
Clearance, dumped bucket: | 50 inches 127 cm |
Dump reach: | 24.2 inches 61 cm |
Dump angle: | 47.2° |
Clearance, level bucket: | 62 inches 157 cm |
Reach at ground: | 50.2 inches 127 cm |
Breakout force (at pin): | 1577 lbs 715 kg |
Breakout force (at 500mm): | 1072 lbs 486 kg |
Breakout force (bucket): | 1650 lbs 748 kg |
Lift to full height (at pin): | 622 lbs 282 kg |
Lift to full height (at 500mm): | 437 lbs 198 kg |
Lift to 1.5m (at pin): | 721 lbs 327 kg |
Lift to 1.5m (at 500mm): | 520 lbs 235 kg |
Bucket width: | 49.2 inches 124 cm |
John Deere 2210 Problems
- The Difficulty of Low RPM
- PTO Clutch
- Electrical Problems
John Deere 2210 FAQ
How much horsepower is a John Deere 2210?
23 hp 17.2 kW
What category is a John Deere 2210?
category 1
What engine is in a John Deere 2210?
John Deere 2210 has Yanmar 3TNE74, liquid-cooled engine
How wide is a John Deere 2210 field cultivator?
12 ft (4 m)
How wide is a John Deere 2210?
John Deere 2210 Wheelbase is 57 inches 144 cm, Length is 104 inches 264 cm, Width is 47.9 inches 121 cm, and Height (hood) is 41.8 inches 106 cm.
I am Dipak Salvi. I’ve been a blogger since 2010, and I love to write. I really like to write about cars, technology, and money. I also write about fitness and health. I run a lot of blogs, such as https://commercialvehicleinfo.com. You can contact me at [email protected]