When it comes to the world of agriculture, few names stand as tall as John Deere. For decades, John Deere has been synonymous with innovation, quality, and reliability in farming equipment.
Among its lineup of iconic tractors, the John Deere 3020 holds a special place.
In this article, we’ll delve into the legacy, features, and impact of the John Deere 3020 tractor.
Also Check Here
- Tym t254
- Craftsman garden tractor models
- New john deere tractor prices
- Kubota pricing
- Tvs cng auto rickshaw price in pune
John Deere 3020 Overview
Presenting the most sought-after Vintage John Deere 3020 Tractor Price USA, John Deere 3020 Specifications, Engine Key Features as well as a summary and pictures.
It was made in the company of John Deere as part of its New Generation series from 1964-1972. It is the John Deere 3020 Tractor is similar in comparison to John Deere 3010 tractor it substituted.
The John Deere Tractor 3020 features the capacity to fuel 29 gallons and a wheelbase that is 90 inches.
John Deere 3020 was offered with three different engines which include the 4.4L 4-cyl diesel engine, a 3.7L gasoline engine with 4-cyl, and a 3.7L gasoline engine that is 4-cyl all manufactured from John Deere.
John Deere 3020 Price
Original Price: $10,000 (1972)
John Deere 3020 Hp
john deere 3020 hp: 71 hp
John Deere 3020 Key Fact
- Make: John Deere
- Model: 3020
- Number of cylinders: 4 cylinders
- Power RPM: 2500 (rpm)
- Fuel tank capacity: 29 gal 109.8 L
- Oil tank capacity: 44 qts 41.6 L
John Deere 3020 Key Features
The John Deere 3020 is a classic tractor model that was produced from the 1960s to the 1970s. It was known for its advanced features and capabilities for its time. Here are some key features of the John Deere 3020 tractor:
-
Powerful Engine: The 3020 was equipped with a powerful engine, typically a 4-cylinder diesel engine, which provided reliable and efficient performance for various farming tasks.
-
Syncro-Range Transmission: This model featured the Syncro-Range transmission system, which allowed the operator to change gears on the move without the need to stop or use the clutch. This increased efficiency and productivity during field operations.
-
Hydraulic System: The tractor came with a hydraulic system that allowed for the attachment of various implements such as plows, mowers, and loaders. This versatility made the 3020 suitable for a wide range of tasks.
-
Power Steering: The inclusion of power steering made maneuvering the tractor easier, reducing the physical effort required by the operator during tight turns and other maneuvers.
-
Comfortable Operator Platform: The operator’s platform was designed for comfort and convenience, featuring an adjustable seat, well-placed controls, and good visibility, which helped reduce operator fatigue during long work hours.
-
Three-Point Hitch: The three-point hitch system enabled easy attachment and adjustment of implements, improving the efficiency of tasks like plowing, tilling, and planting.
-
Rollover Protective Structure (ROPS): Safety was a consideration with the 3020, and some models were equipped with a ROPS to provide protection to the operator in the event of a rollover.
John Deere 3020 Serial Number
| 1964: | 50000 |
| 1965: | 68000 |
| 1966: | 84000 |
| 1967: | 97286 |
| 1968: | 112933 |
| 1969: | 123000 |
| 1970: | 129897 |
| 1971: | 150000 |
| 1972: | 154197 |
John Deere 3020 Specification
| Make | John Deere |
| Model | 3020 |
| Company Country | United States |
| Production years | From 1964 Until 1972 |
| Tractor type | – |
| Fuel | – |
| Price | 10,000 USD |
| Total build | 74,463 (Row Crop) |
Horsepower and engine specs
| Engine size | – |
| Number of cylinders | 4 cylinders |
| Horsepower | – |
| Power RPM | 2500 (rpm) |
| Engine torque | – |
| Engine torque RPM | – |
| Fuel type | – |
| Fuel tank capacity | 29 gal 109.8 L |
| Compression ratio | 9.0:1 |
| Bore stroke | 4.25×4.00 inches 108 x 102 mm |
| Oil tank capacity | 9 qts 8.5 L |
Clutch and transmission specs
| Transmission type | full power shift |
| Transmission gears | 8 forward and 4 reverse |
| Clutch system | hydraulic wet disc |
| Oil tank capacity | 44 qts 41.6 L |
Drawbar specs
| Drawbar claimed power | 57 hp 42.5 kW |
3-point hitch specs
| Hitch control system | – |
| Rear hitch | II |
| Rear hitch lift | – |
Dimensions, weight, and tires specs
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-38 |
| Weight | Shipping: |
| Length | 138.5 inches 351 cm |
| Width | 89.625 inches 227 cm |
| Height | – |
| Wheelbase | 90 inches 228 cm |
| Ground clearance | – |
| Rear tread size | 60 to 91 inches |
| Turning radius | 7139 lbs 3238 kg (gas) |
Battery and electrical specs
| Number of batteries | 1 |
| Battery voltage | 12 V |
| Electric ground force | positive |
| Engine starter volts | 12 V |
Mechanical and cab specs
| Wheel drive | 4×2 2WD |
| Steering system | power assist |
| Braking system | differential hydraulic wet disc |
| Cabin type | Open operator station |
| Differential lock | rear optional |
Power take-off (PTO) specs
| PTO claimed power | 70 hp 52.2 kW (Syncro-Range) |
| PTO engine @RPM | 540@2100 (rpm) |
| PTO clutch system | – |
| Rear PTO system | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO system | – |
| Mid PTO RPM | 1000 (rpm) |
| PTO fuel consumption | – |
John Deere 3020 Review
John Deere produced its 3020 model of a farm tractor from 1964 until 1972 in the United States, the exact model was sold for 10,000 USD, with an open cabin for the operator as well as more than 74,463 (Row Crop) models had been built.
Talking about dimensions as well as weight the model weighs it is 89.625 inches (227 cm) in width. It also has 138.5 millimeters 351 centimeters in length and has a diameter of 90 inches and 228 cm. The rear tread is between 60 and 91 inches.
This tractor is able to accommodate Ag tires with a diameter of 6.00-16 in front, along with 6.00-16 back.
The John Deere 3020 has four cylinders and the capacity of the fuel tank was 29 gals 109.8 L. This machine is equipped with four-wheel drives, 2WD., 8 forward, and 4 reverse gearing systems.
John Deere 3020 Attachments
John Deere 48 Loader |
|
| Loader weight: | 1220 lbs 553 kg |
| Height (to pin): | 126 inches 320 cm |
| Clearance, dumped bucket: | 104 inches 264 cm |
| Dump reach: | 26 inches 66 cm |
| Dump angle: | 39° |
| Reach the ground: | 68 inches 172 cm |
| Breakout force (lift): | 3600 lbs 1632 kg |
| Lift to full height (at pin): | 2400 lbs 1088 kg |
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm |
|
John Deere 3020 Problems
Certainly! The John Deere 3020 is a widely recognized tractor model. However, like any machinery, it is susceptible to issues that can develop over time. Presented below are several typical problems that may emerge with a John Deere 3020 tractor, accompanied by potential remedies:
1. Starting Problems: Issue:
The tractor experiences difficulties starting or fails to start altogether.
Solution:
- Inspect the battery voltage and connections. Clean and secure terminals as needed.
- Examine the starter motor and solenoid. Replace if found faulty.
- Investigate the fuel system for obstructions or airlocks. If necessary, bleed the fuel system.
- Evaluate the condition of the ignition switch and wiring. Replace damaged components.
2. Engine Overheating: Issue:
The engine’s temperature escalates significantly during operation.
Solution:
- Check for any obstructions or debris in the radiator. Thoroughly clean the radiator.
- Verify the coolant level and mixture, adjusting as required.
- Inspect the water pump to ensure proper functionality. Replace if deemed necessary.
- Confirm that the cooling fan is operational.
3. Hydraulic System Challenges:
Issue:
The hydraulic system encounters problems such as sluggish or unresponsive hydraulics.
Solution:
- Monitor the hydraulic fluid level and quality. Top up or replace as needed.
- Examine hydraulic filters for blockages. Replace if they are dirty.
- Detect leaks in hydraulic hoses and connections. Undertake repairs or replacements as necessary.
- Investigate the hydraulic pump for potential malfunctions. Repair or replace as appropriate.
4. Transmission Issues:
Issue: Complications arise with gear shifting, gear slippage, or unusual noises from the transmission.
Solution:
- Check the transmission fluid level and condition. Replace if the fluid is old or contaminated.
- Inspect the clutch for signs of wear and ensure proper adjustment. Replace if warranted.
- Validate the proper functioning of the gear linkage. Make adjustments or repairs as required.
- Look for signs of damage or wear in gears. Replace as needed.
5. Electrical Concerns:
Issue: Electrical components malfunction, lights flicker, or other electrical problems emerge.
Solution:
- Inspect fuses and relays for any blown fuses. Replace as needed.
- Evaluate wiring for damage or corrosion. Undertake repairs or replace damaged sections.
- Confirm the proper connection and functionality of all connectors and switches.
- Test the alternator to ensure it is charging properly. Replace if it is not functioning correctly.
John Deere 3020 Hydraulic Pump
The John Deere 3020 tractor is equipped with a hydraulic pump that is responsible for providing hydraulic power to various components of the tractor. Here is some information about the hydraulic pump for the John Deere 3020 based on the search results:
1. Hydraulic Pump Options: There are several options available for the hydraulic pump of the John Deere 3020 tractor. These options include:
- Reman R94659 hydraulic pump with a splined shaft and 8 pistons
- AR97872 hydraulic pump with a 1-1/16″ discharge
- Hydraulic pump compatible with various John Deere tractor models, including the 3020
- Replacement hydraulic pump (AMX4830) that fits John Deere tractor models such as the 3020
2. Availability: Hydraulic pumps for the John Deere 3020 tractor can be purchased from various sources, including online retailers and tractor parts suppliers
3. Installation and Repair: If you need to replace or repair the hydraulic pump on your John Deere 3020 tractor, it is recommended to consult the tractor’s manual or seek assistance from a qualified technician. They will be able to guide you through the installation or repair process.
Conclusion
That was all about the John Deere 3020 Price, Specs, Review, and Key Features, But if you have any queries regarding this post, then please Comment below in the comment Box, We will Solve your Problem as soon as possible. Thanks for Visiting our Site.
Visit our Website at Commercialvehicleinfo.com for additional Details.
John Deere 3020 FAQs
The John Deere 3020 is a tractor model that was produced by John Deere from 1964 to 1972. It was part of the New Generation series and gained popularity for its advanced features and versatility.
The John Deere 3020 was equipped with a 4.4-liter 4-cylinder diesel engine, producing around 77 horsepower. There was also an option for a gasoline engine with slightly different specifications.
The dimensions of the John Deere 3020 vary slightly depending on the configuration, but on average, it is approximately 160 inches in length, 86 inches in width, and 101 inches in height.
The John Deere 3020 was offered with a range of transmission options, including Syncro-Range, PowerShift, and Quad-Range transmissions, allowing operators to choose the one that best suited their needs.
The PTO on the John Deere 3020 had a power rating of approximately 65 horsepower, making it capable of efficiently driving various implements and attachments.
The John Deere 3020 was compatible with a wide range of implements, including plows, mowers, loaders, and more, making it a versatile choice for both agricultural and industrial applications.
The fuel tank of the John Deere 3020 had a capacity of around 37 gallons, which allowed for extended operation without frequent refueling.
The John Deere 3020 featured a hydraulic system capable of delivering around 21 gallons per minute (GPM) of hydraulic flow, enabling efficient operation of hydraulic implements.
The weight of the John Deere 3020 varied depending on the configuration and options, but on average, it weighed around 7,000 to 8,000 pounds.
