Hey Guys, Do You want to buy a John Deere 3025E Compact Utility Tractor in the USA or anywhere else, But, have no idea its price & specifications? Then, please read this post carefully. Cause here in this post includes the prices and key specification list of the John Deere 3025E Compact Utility Tractor. I hope That all kinds of information are helpful to you.
Contents
John Deere 3025E Price
$21,913.00 USD, PLUS ADDITIONAL CHARGES
John Deere 3025E Overview
- CATEGORY: Compact Utility Tractors
- MANUFACTURER; John Deere
- MODEL: 3025E
- MODEL YEAR: 2022
- OPERATION HOURS: 1
- HORSEPOWER: 25
- STATUS; On Lot
John Deere 3025E Key Features
- TRANSMISSION: Hydro
- FRONT AXLE: MFWD
- LOADER: Yes
John Deere 3025E Specification
Key Specs
| Engine power (gross) | 18.2 kW 24.7 hp |
|---|---|
| Power take-off (PTO) power | 14.4 kW 19.4 hp |
| Steering hydraulics | 15 L/min 4 gpm |
| Implement hydraulics | 20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Optional |
| Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
| Wheelbase | 159.5 cm 62.8 in. |
Engine
| Family | EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA |
|---|---|
| Manufacturer | Yanmar |
| Engine model | 3TNV88F-EPJT2 |
| Engine power (gross) | 18.2 kW 24.7 hp |
| Power take-off (PTO) power | 14.4 kW 19.4 hp |
| Rated engine speed | 2400 rpm |
| Type | Diesel |
| Injection pump type | Direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 72.4 Nm 53.4 lb-ft |
| Fuel tank capacity | 28.5 L 7.5 U.S. gal. |
Electrical
| Battery size | 500 CCA |
|---|---|
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
Fuel system
| Type | Direct injection |
|---|---|
| Fuel consumption |
Transmission
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
|---|---|
| Optional transmission; forward/reverse | |
| Left-hand reverser | No |
| Transmission gear ranges | |
| Final drive | Bull Gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Clutch, wet/dry | |
| Clutch disk diameter wet clutch | |
| Axle capacity | Front 798 kg 1760 lb Rear 1197 kg 2640 lb |
| Creeper | No |
| Cruise control | Optional |
| Differential lock | Yes |
| Drawbar maximum vertical load |
Hydraulics
| Type | Open center |
|---|---|
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure | 172.4 bar 2500 psi |
| Draft control sensing | Position control |
| Remote control valves are available | Up to two (optional) |
3-point hitch
| Type | Category 1 |
|---|---|
| Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Power take-off (PTO)
| Standard | Rear – 540 rpm |
|---|---|
| Optional | |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Engagement method |
Fluid capacities
| Crankcase with filter | 4.5 L 4.8 qt |
|---|---|
| Transmission and hydraulic system | 22 L 23.2 qt |
Final drive
| Type | Bull Gear |
|---|---|
| Differential lock |
Operator station
| Rollover protective structure | Type Foldable ASABE S478 |
|---|---|
| Platform – flat/straddle | Semi-flat |
| Gear shift location – console/floor | Left-hand side |
john deere 3025e Dimensions
| Height | |
|---|---|
| Wheelbase | 159.5 cm 62.8 in. |
| Front axle clearance | 36.3 cm 14.3 in. |
| Turning radius with brakes | |
| Turning radius without brakes | 2.9 m 9.4 ft |
| Limited slip differential | |
| Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Tires
| Front | Farm – 7-14 Turf – 27×8.5-15 R4 – 25×8.5-14 R4 – 27×8.5-15 |
|---|---|
| Rear | Farm – 11.2-24 Turf – 41×14-20 R4 – 15-19.5 R4 – 43×16-20 |
| Front tread range | |
| Rear tread spacing |
John Deere 3025e Attachments
John Deere 300E Loader |
|
| Height (to pin): | 84 inches 213 cm |
| Clearance, dumped bucket: | 63 inches 160 cm |
| Dump reach: | 24 inches 60 cm |
| Dump angle: | 44° |
| Clearance, level bucket: | 78 inches 198 cm |
| Reach at ground: | 54 inches 137 cm |
| Breakout force (at pin): | 1704 lbs 772 kg |
| Breakout force (at 500mm): | 1204 lbs 546 kg |
| Breakout force (bucket): | 1422 lbs 645 kg |
| Lift to full height (at pin): | 1186 lbs 537 kg |
| Lift to full height (at 500mm): | 845 lbs 383 kg |
| Lift to 1.5m (at pin): | 1294 lbs 586 kg |
| Lift to 1.5m (at 500mm): | 977 lbs 443 kg |
| Bucket width: | 61 inches 154 cm |
john deere 3025e lift capacity
John Deere 3025e Lift Capacity is 615 kg 1356 lb
John Deere 3025e hp
John Deere 3025E has a 3TNV88F-EPJT2 engine model manufactured by Yanmar that produces an 18.2 kW 24.7 hp
John Deere 3025e Problems
- Hard Starting Engine
- Halt During Operation
- Reduced Engine Power
- Abnormal Fuel Consumption
- Unwanted Engine Noise or Knocking
john deere 3025e review Video
This article is all about the John Deere 3025E Tractor detail info. You can blindly trust it because it is genuine and reliable information, that is very helpful to you for buying or selling this model tractor, but if you have any queries regarding this article, then please comment below in the comment box, thanks.
john deere 3025e FAQ
Does the 3025E have enough power?
The torque output is 51.3 lbft. It is strong enough to power the 2222lb 3025E (tractor-only). The engine output is sent to a 2-range hydrostatic transmission made of a strong alloyed, die-cast aluminum case.
How much horsepower does a 3025E have?
John Deere 3025E has a 3TNV88F-EPJT2 engine model manufactured by Yanmar that produces an 18.2 kW 24.7 hp
How much does a John Deere 3025E with loader weight?
1007.9 kg (2222 lb.)