John Deere 3039r Specs, Price & Review 2022

A 4WD small utility tractor from the 3R series is the John Deere 3039R. Since 2014, John Deere has produced this tractor in Augusta, Georgia, in the United States.

A 1.6 L three-cylinder diesel engine and either a hydrostatic transmission with unlimited (3-range) forward and reverse gears or a power shuttle transmission with twelve forward and twelve reverse gears are included with the JD 3039R.

The Yanmar 3TNV86 engine was utilized by the John Deere 3039R compact utility tractor. It has a three-cylinder, 1.6 L, 1,599 cm2 (97.6 cu in), turbocharged diesel engine with a bore and stroke of 86.0 mm (3.39 in) and 90.0 mm (3.54 in), respectively.

The output power of this engine was 39.6 PS (29.1 kW; 39.0 HP) at 2,600 rpm.

The John Deere 3039R comes with a fuel tank capacity of either 44.7 liters (11.8 US gal.; 9.8 Imp. gal.) for the Cab version or 51.1 liters (13.5 US gal.; 11.2 Imp. gal.) for the ROPS version, power steering, wet disc brakes, and two-post foldable ROPS or Cab with air conditioning (optional).

John Deere 3039r

John Deere 3039r Quick Specs

  • Manufacturer:  John Deere
  • Engine Brand:  Yanmar
  • Engine Power:  39 hp
  • Fuel Capacity:  13.5
  • Transmission:  eHydro
  • Drive Wheels:  MFWD
  • Total Hydraulic Output:  13.9 gpm

John Deere 3039r Price

John Deere 3039R Original Price: $27,222

John Deere 3039r Features

  • 39hp Turbo Charged Yanmar Diesel Engine (32 PTO hp)
  • eHydro Hydrostatic Drive Transmission
  • Four Wheel Drive with Differential Lock
  • Dual Hydraulic Pumps Producing 15.9gpm Capacity
  • Built-in Safety Features

John Deere 3039r Specs

3-Point Hitch

Category Category 1
Lift capacity (24-in. behind link arms) 997.9 kg (2,200 lbs)


Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) – 1315.4 kg, Cab – 1619.3 kg
Front Axle Clearance 12.2 in (31 cm)
Turning radius with brakes 2.7 METERS
Turning radius without brakes 9.2 ft (3 m)
Wheelbase 68 ft (21 m)

Electrical System

Alternator (12-V) 75 amp
Battery size 500 CCA
Starter size 1.9 hp (1 kW)


Air cleaner Dry-type, two-stage dual element
Aspiration Turbocharged
Bore 3.4 in (9 cm)
Compression ratio 19.1:1
Cooling system Water pump
Cylinder liners Cast-In-Block
Displacement 95.9 cu in (0 m)
Emissions compliance Final Tier 4
Engine Manufacturer Yanmar
Engine Model 3TNV86CT-MJT
Engine torque at rated speed 105 Nm
Engine Type Diesel
Fuel tank capacity Rollover protective structure (ROPS): 51.1 L 13.5 U.S. gal. Cab: 44.7 L 11.8 U.S. gal.
Gross Power 38.3 hp (29 kW)
Injection pump type High-pressure common rail direct injection
Lubrication Pressurized
Number of Cylinders 3
Power take-off (PTO) power 31.6 hp (24 kW)
Rated engine speed 2600 rpm
Stroke 3.6 in (9 cm)

Final Drive

Final Drive Type Bull Gear

Fluid Capacities

Crankcase with filter 4.8 L
Transmission and hydraulic system 23.8 L

Fuel System

Fuel consumption 9.1 L/hr
Fuel System Type High-pressure common rail direct injection

Hydraulic System

Draft control sensing Position control
Hydraulic Type Open Center
Maximum operating pressure 2500 psi
Pump rated output Steering – 22.3 L/min, Implement – 32.5 L/min
Pump Type Dual gear
Remote control valves are available Up to four rear remotes

Operator Station

Gear shift location – console/floor Left Hand Side
Platform – flat/straddle Flat
Rollover protective structure Type Foldable Yes

Power Take-Off (PTO)

Brake (for mid and rear PTO) Wet disc
Clutch Wet disc
Control Position control
Engagement method Electro-hydraulic
Optional Mid – 2100 rpm
Standard Rear – 540 rpm


Front Tires Size Farm – 7-14 Turf (Gear 4WD) – 27×8.50-15 Turf (HST 4WD) – 25×10.5LLx15 R4 – 25×8.5-14
Front tread range 114 CENTIMETERS
Rear Tires Size Farm – ?11.2-24 Turf – 41×14-20 or 41x18LL-16.1 R4 – 15-19.5
Rear tread spacing 103.1 CENTIMETERS


Axle capacity Front – 720-1450 kg, Rear – 2400 kg
Brakes Multi-plate wet disc
Clutch, wet/dry Wet
Creeper SpeedMatch optional
Cruise control Standard
Final Drive Type Bull Gear
Left-hand reverser Yes
Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Steering Hydrostatic power steering
Transmission gear ranges 12F/12R PowrReverser (PRT) Infinitely variable – 3 range

John Deere 3039R Review

John Deere 3039r Attachments

60.9″ Mower deck

Type: mid-mount John Deere 60D
Cutting width: 60.9 inches
154 cm
Weight: 324 lbs
146 kg
Overall width: 75.3 inches
191 cm
Cut height: 1.5 to 5 inch
3 to 12 cm

72.8″ Mower deck

Type: mid-mount John Deere 72D
Cutting width: 72.8 inches
184 cm
Weight: 345 lbs
156 kg
Overall width: 86 inches
218 cm
Cut height: 1.5 to 5 inch
3 to 12 cm

John Deere 375A Backhoe

Backhoe type: John Deere 375A Backhoe
Weight: 1250 lbs
567 kg
Transport height: 85 inches
215 cm
Bucket width: 16 inches
40 cm
2-Foot flat digging depth: 94 inches
238 cm
Reach from pivot: 129 inches
327 cm
Loading height: 68 inches
172 cm
Bucket Rotation: 180
Swing Arc: 170
Bucket force: 3063 lbs
1389 kg
Dipperstick force: 2041 lbs
925 kg

That’s all there is to know about the John Deere 3039R Tractor Price, Specs, Review, and Key Features; nevertheless, if you have any questions about this topic, kindly submit them in the comment section below. We will respond to your inquiry as soon as we can.