Contents
- 1 John Deere 4030 Specs, Hp, Attachment, Features, Price & Review
- 2 John Deere 4030 Tractor Price
-
3 John Deere 4030 Specs
- 3.1 General information and Service Manual
- 3.2 Horsepower and engine specs
- 3.3 Clutch and transmission specs
- 3.4 Hydraulic specs
- 3.5 Power take-off (PTO) specs
- 3.6 Dimensions, weight, and tires specs
- 3.7 Battery and electrical specs
- 3.8 Mechanical and cab specs
- 3.9 Drawbar specs
- 3.10 3-point hitch specs
- 3.11 John Deere 4030 Tractor Review
- 4 John Deere 4030 Attachments.
- 5 John Deere 4030 FAQ
John Deere 4030 Specs, Hp, Attachment, Features, Price & Review
A 2WD row-crop tractor from the Generation II series is the John Deere 4030. Between 1973 and 1977, John Deere produced this tractor in Waterloo, Iowa, in the United States.
One of two engines—a 5.4 L (329.0 cu in) six-cylinder diesel engine or a 5.0 L (303.0 cu in) six-cylinder gasoline engine (this gasoline engine was only offered during the 1973 model year)—and one of two transmissions—either a partially synchronized transmission with 8 forward and 2 reverse gears or a partial power shift transmission with 16 forward and 6 reverse gears—come standard on the John Deere 4030.
John Deere 4030 Tractor Price
Original Price: $17,721 (1977)
John Deere 4030 Hp
80 hp 59.7 kW
John Deere 4030 Tractor Serial Numbers
| 1973: | 1000 |
| 1974: | 6700 |
| 1975: | 10153 |
| 1976: | 13022 |
| 1977: | 15417 |
| Final: | 16689 |
John Deere 4030 Specs
| Make | John Deere |
| Model | 4030 |
| Company Country | United States |
| Production years | From 1973 Until 1977 |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Price | 17,721 USD |
| Total build | 15,690 (total) |
| Engine size | 303 ci or 5.0 L |
| Number of cylinders | 6 cylinders |
| Horsepower | – |
| Power RPM | 2500 (rpm) |
| Engine torque | – |
| Engine torque RPM | – |
| Fuel type | diesel |
| Fuel tank capacity | 35 gal or 132.5 L |
| Compression ratio | 16.2:1 |
| Bore stroke | 3.86×4.33 inches or (98 x 110 mm) |
| Coolant tank capacity | 22 qts or 20.8 L |
| Transmission system | John Deere Quad-Range |
| Transmission type | partial power shift |
| Transmission gears | 16 forward and 6 reverse |
| Hydraulic system | closed center |
| Number of valves | 1 to 3 |
| Pump flow rate | 23 gpm or 87.1 lpm |
| Hydraulic tank capacity | 13 gal or 49.2 L |
| PTO claimed power | – |
| PTO real power | 77.72 hp or 58.0 kW |
| PTO clutch system | – |
| Rear PTO system | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO system | – |
| PTO fuel consumption | 5.0 gal/hour or 18.9 l/hour |
| AG front tires | 6.00-16 |
| AG rear tires | 16.9-34 |
| Weight | 9,180 lbs or 4164 kg |
| Length | – |
| Width | – |
| Height | – |
| Wheelbase | 101 inches [256 cm] |
| Ground clearance | – |
| Rear tread size | 60 to 92.6 inches |
| Front tread size | 48 to 68 inches |
| Number of batteries | 2 |
| Battery voltage | 6 V |
| Electric ground force | negative |
| Electric charging system | alternator |
| Engine starter volts | 12 V |
| Wheel drive | 4×2 2WD |
| Steering system | power |
| Braking system | differential hydraulic wet disc |
| Cabin type | Open operator station |
| Differential lock | mechanical rear |
| Drawbar real power | 67.03 hp or 50.0 kW |
| Drawbar fuel consumption | 5.7 gal/hour or 21.6 l/hour |
| Max drawbar pull | 7,512 lbs or 3407 kg |
| Hitch control system | – |
| Rear hitch | II |
| Rear hitch lift | – |
John Deere 4030 Tractor Review
John Deere 4030 Attachments.
The JD 4030 has a 132.5 liter (35 US gal; 29.1 Imp. gal) fuel tank and differential hydraulic wet disc brakes in addition to an open operator station, four-post Roll-Gard ROPS, or Sound-Gard cab.
The John Deere 148 loader might be added to the Deere 4030.
John Deere 148 Loader |
|
| Loader weight: | 1350 lbs 612 kg |
| Height (to pin): | 126 inches 320 cm |
| Clearance, dumped bucket: | 102 inches 259 cm |
| Dump reach: | 32 inches 81 cm |
| Dump angle: | 38° |
| Clearance, level bucket: | 121 inches 307 cm |
| Rollback angle: | 11° |
| Breakout force (lift): | 4700 lbs 2131 kg |
| Lift to full height (at pin): | 3100 lbs 1406 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m |
|
| 0.8 cu yd 0.6 cu m |
|
| 0.9 cu yd 0.7 cu m |
|
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm |
|
| 84 inches 213 cm |
|
| 96 inches 243 cm |
|
The John Deere 4030 Tractor’s Price, Specification, and Features are covered in full. However, if you have any issues with this post, do leave a remark in the space provided below.
I’ll do my best to find a quick solution to your issue. Thanks.
John Deere 4030 FAQ
How many horsepower is a John Deere 4030?
80 hp 59.7 kW
What engine did the John Deere 4030 have?
John Deere 4030 has a John Deere liquid-cooled inline horizontal-shaft engine
What years did they make a John Deere 4430?
1971 and 1977
What Loader fits a John Deere 4030?
1350 lbs 612 kg
Is JD 4030 a good tractor?
The 4030 wasn’t a particularly problematic tractor, but it has a reputation for being the biggest fuel guzzler JD (or perhaps anyone else) has ever made.
A 4430 has substantially greater power but uses much less fuel. A 4430 would be a significant upgrade, but a 4440 is significantly better than a 4430.