A 2WD or 4WD backhoe loader tractor, the John Deere 410 was produced by John Deere in Dubuque, Iowa, USA, between 1971 and 1983. A 3.6 L (219.0 cu in) four-cylinder diesel engine and a power shuttle with a wet disc clutch gearbox with 8 forward and 8 reverse gears are included in the John Deere 410’s equipment.
The John Deere engine was utilized in the JD 410 backhoe loader tractor.
It has a 3.6 L, 3,589 cm2, (219.0 cuin) four-cylinder, naturally aspirated diesel engine with cylinder bore and stroke measurements of 102.0 mm (4.02 in) and 110.0 mm (4.33 in), respectively.
The output power of this engine was 66.9 PS (49.2 kW; 66 HP) at 2,500 rpm and the torque was 217.0 Nm (22 kg/m; 159.9 ft/lb) at 1,300 rpm.
The John Deere 410 is outfitted with a fuel tank capacity of 73.8 liters (19.5 US gal; 16.2 Imp. gal), power steering, hydraulic wet disc brakes, four-post ROPS, or a Cab with an optional heater.
Contents
- 1 John Deere 410 Price
-
2 John Deere 410 Specs
- 2.1 General information and Service Manual
- 2.2 Horsepower and engine specs
- 2.3 Clutch and transmission specs
- 2.4 Hydraulic specs
- 2.5 3-point hitch specs
- 2.6 Dimensions, weight, and tires specs
- 2.7 Battery and electrical specs
- 2.8 Mechanical and cab specs
- 2.9 Power take-off (PTO) specs
- 2.10 John Deere 410 Backhoe Loader Review
- 3 John Deere 410 Attachments
- 4 John Deere 410 FAQ
John Deere 410 Price
Price: $17,900 USD (Used Model Price)
John Deere 410 Weight
17,786 lb.
John Deere 410 Specs
| Make | John Deere |
| Model | 410 backhoe-loader |
| Company Country | United States |
| Production years | From 1971 Until 1983 |
| Tractor type | Backhoe loader tractor |
| Fuel | diesel |
| Price | – |
| Total build | – |
| Engine size | 219 ci or 3.6 L |
| Number of cylinders | 4 cylinders |
| Horsepower | 62 hp or 46.2 kW |
| Power RPM | 2500 (rpm) |
| Engine torque | 160 lb-ft or 217.0 Nm |
| Engine torque RPM | 1300 (rpm) |
| Fuel type | diesel |
| Fuel tank capacity | 19.5 gal or 73.8 L |
| Bore stroke | 4.02×4.33 inches or (102 x 110 mm) |
| Oil tank capacity | 9 qts or 8.5 L |
| Coolant tank capacity | 13 qts or 12.3 L |
| Transmission type | power shuttle |
| Transmission gears | 8 forward and reverse |
| Clutch system | 254mm wet disc |
| Oil tank capacity | 40 qts or 37.9 L |
| Hydraulic system | closed center |
| Pump flow rate | 38 gpm or 143.8 lpm |
| Hydraulic tank capacity | 20.5 gal or 77.6 L |
| Hydraulic pressure | 2350 psi or 162.0 bar |
| Hitch control system | – |
| Rear hitch | – |
| Rear hitch lift | – |
| Industrial front tires | 11L-16 |
| Industrial rear tires | 16.9-24 |
| Weight | 14210 lbs or 6445 kg |
| Length | 285.5 inches [725 cm] |
| Width | 84 inches [213 cm] |
| Height | 102 inches [259 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | – |
| Rear tread size | 66 inches |
| Front tread size | 61 inches |
| Number of batteries | 2 |
| Battery voltage | 6 V |
| Battery Amps | 340 amps |
| Electric ground force | – |
| Electric charging system | alternator |
| Engine starter volts | 12 V |
| Wheel drive | 4×2 2WD |
| Final drive system | inboard planetary |
| Steering system | power |
| Braking system | hydraulic wet disc |
| Cabin type | Four-post ROPS |
| PTO claimed power | – |
| PTO clutch system | – |
| Rear PTO system | – |
| Front PTO system | – |
| PTO fuel consumption | – |
John Deere 410 Backhoe Loader Review
John Deere 410 Attachments
John Deere Loader |
|
| Height (to pin) | 129 inches 327 cm |
| Clearance dumped a bucket | 102 inches 259 cm |
| Dump angle | 50° |
| Reach ground | 33 inches 83 cm |
| Rollback at ground | 40° |
| Breakout force (lift) | 7500 lbs 3402 kg |
| Lift to full height (at pin) | 5000 lbs 2268 kg |
| Bucket width | 89.4 inches 227 cm |
| Raise time to the height | 4.6 s |
| Bucket dump time | 1.3 s |
| Lowering time | 2.9 s |
John Deere Backhoe |
|
| Backhoe type | John Deere Backhoe |
| Transport height | 139 inches 353 cm |
| Digging depth | 184 inches 467 cm |
| 2-Foot flat digging depth | 182 inches 462 cm |
| 8-Foot flat digging depth | 170 inches 431 cm |
| Reach from pivot | 224 inches 568 cm |
| Swing Arc | 180 |
| Bucket force | 9650 lbs 4377 kg |
| Dipperstick force | 7158 lbs 3246 kg |
So the John Deere 410 Backhoe Loader was the main focus of this. I hope you were able to find all you were looking for online.
Additionally, I hope you enjoyed reading the essay. If you have any questions or worries, please leave a comment in the space provided below.
I’ll get back to you as soon as I can. And thanks for reading; be sure to check back for additional information.
John Deere 410 FAQ
What horsepower is a John Deere 410?
66 hp / 49.2 kW
What does a John Deere 410 weight?
8,068 kg (17,786 lb.)
How much can a John Deere 410 lift?
5000 lb. (2268 kg) Height to bucket hinge pin 10ft.