The Husqvarna K770 is one of The most Powerful power cutters on The market thanks to its combination of Features.
The semi-Automatic SmartTension(TM) system built into The Belt Ensures maximum power transmission with minimal wear and maximum belt life.
Less effort is Required, and more productivity is Achieved, Thanks to The low vibrations, lightweight, and Impressive power-to-weight Ratio, as well as The reliability of The starter.
The KV7 trolley is adaptable for use on roads And can effortlessly Slice Through curved or straight Paths, or Even come dangerously close to The curb.
Husqvarna K770 Review
Pros
- Gas-powered cut-off saws That Are not very Heavy Are convenient tools to Have on hand.
- Also known as The “Husqvarna K760,” The K770 is a cut-off saw. The K760 is a Powerful Fourteen-inch Chop saw.
- 5-HP motor with 74CC power, which is Far superior Than The competitors (the STIHL T Gas Chop Saw, which only has 66.7 CCA and 4.4 HP).
- This is Because The blades Are given a constant water Supply, which Makes cutting easier And keeps Them sharp for Longer.
- Gas Operation Eliminates The need for Any form of Electricity And is Not Geographically limited.
- The Husqvarna Demo saw, with its 4-inch cutting depth, is The Biggest of its kind And has been The market Leader for years, long before it was known as “the Target Quickie Saw.
Cons
- The saws are gas-powered and can be very loud. Ear protection is recommended.
- Needs a precise solution of oil to gas to operate properly.
- The product is not suitable for use inside due to fumes from the exhaust.
Husqvarna K770 Review
The Husqvarna K770 is a high-quality power cutter for professionals. It’s made for various tasks like cutting concrete, asphalt, and bricks. It runs on a robust 73.5cc engine, producing 5.7 horsepower. The K770 also has features that make it easy to start, use, and take care of.
For more details check out the Youtube video
Husqvarna K770 Features
Concrete, asphalt, and stone are just some of the materials that may be cut with the Husqvarna K770, a professional-grade power cutter. Included in its list of features are:
- High-performance chopping is ensured by a robust engine with 14.4 horsepower.
- Up to a 5-inch depth of cut (127 mm)
- There’s a 14-inch cap on the largest blade size we provide (350 mm)
- Assuring the operator’s peace of mind by dampening vibrations at the grip
- In order to ensure long-term dependability, the starter and rope are dust-proof.
- In the case of low oil or other mechanical failures, the engine will shut down automatically.
What’s Included?
- Husqvarna K770 Power Cutter
- Gardena Water Connector
- Combination Spanner
- Operator’s Manual
Husqvarna K770 Specification
Engine
Output power | 5 hp | 5 hp |
---|---|---|
Cylinder displacement | 4.48 cu. inch | 4.48 cu. inch |
Electrode gap | 0.02 in | 0.02 in |
Cylinders | 1 | 1 |
Number of strokes | 2-stroke engine | 2-stroke engine |
Exhaust emissions (CO2 EU V)
|
711 g/kWh | 711 g/kWh |
Cutting Deck
Cutting depth, max | 5 in | 4 in |
---|
Cutting System
Blade diameter, max | 14 in | 12 in |
---|---|---|
Arbor diameter | 0.8/1 in | 0.8/1 in |
Blade thickness, max | 0.2 in | 0.2 in |
Peripheral speed, max | 18,000 fpm | 16,000 fpm |
Dimensions
Product size length | 23.82 in | 23.82 in |
---|---|---|
Product size width | 8.86 in | 8.86 in |
Product size height | 16.34 in | 15.39 in |
Weight | 22.4 lbs | 22 lbs |
Sound And Noise
Sound power level, guaranteed (LWA) | 115 dB(A) | 115 dB(A) |
---|---|---|
Sound pressure level at operators ear | 101 dB(A) | 101 dB(A) |
Vibration
Vibrations left/front handle | 2 m/s² | 2.1 m/s² |
---|---|---|
Vibrations right/rear handle | 2.3 m/s² | 2.3 m/s² |
Conclusion
If you need to cut Pavers, brick, Block, or concrete Slabs while working Outside, Consider Getting a Husqvarna concrete saw.
It Has The muscle to Handle any Demanding job on The job site And comes included with a water feed to ensure clean, precise cuts Every Time.
Those in The market for a Reliable Concrete cutting machine should choose this version.