Table of Contents

Allis Chalmers 5030 Specs, Weight, Price & Review

If you’re searching for Allis Chalmers 530 Specs price, reviews, Weight, and features, you’ve come to the right place.

Our commercialvehicleinfo team has confirmed this information with several Case associates and agents. Let’s discuss Allis Chalmers 530 Specs, price and reviews.

It can be challenging to find complete information online. We recommend that you save your valuable time and energy.

Our commercialvehicleinfo team has compiled complete and step-by-step information on Allis Chalmers 530 Specs price and reviews, Weight, and features to make your search easier.

About Allis Chalmers 5030 Specs

The Allis Chalmers 5030 is a compact two-wheel utility tractor manufactured by Japanese company Hinomoto at their facility located in Osaka, Japan for Allis Chalmers from 1979 until 1985.

The tractor is an identical model as Simplicity 9528. It is the Allis Chalmers 5030 comes with two-cylinder, liquid-cooled Toyosha diesel engine,

which has 1.5 L 1,477 cc (90.1 cubic inches) of displacement, and sliding gear transmission, with three reverse and 12 forward gears (four forward gears as well as reverse with low, high and creeper gears).

It was the Allis Chalmers 5030 utility tractor that employed a two-cylinder liquid-cooled naturally-aspirated Toyosha S148 diesel engine that had 97.0 millimetres (3.82 inches) of the bore in the cylinder and 100.0 millimetres (3.94 inches) of the piston stroke.

The compression ratio is 23:1. It generated 28.0 HP (20.9 kW) of maximum horsepower or 26.0 HP (19.4 kW) on the PTO-shaft. The engine utilized Donaldson Dry air cleaner.

Allis Chalmers 5030 Price 

1980 Allis Chalmers 5030 $6,500

Allis Chalmers 5030 Weight

Operated: 1,147 kg (2,530 lb.)

 Allis Chalmers 5030 Engine oil capacity

27.0 L (7.0 Gal.)

Allis Chalmers 5030 Model 

1979 – 1985

Allis Chalmers 5030 Specs 

General Specifications

Model Allis Chalmers 5030
Length 2,550 mm (100.4 in.)
Width 1,360 mm (53.5 in.)
Height Exhaust Stack: 2,080 mm (81.9 in.)
Hood: 1,140 mm (45.1 in.)
Steering Wheel: 1,360 mm (53.7 in.)
Wheelbase 1,560 mm (61.8 in.)
Ground clearance 360-390 mm (14.5-15.6 in.)
Weight Operated: 1,147 kg (2,530 lb.)
Ballasted: 1,758 kg (3,876 lb.)
Fuel tank capacity 27.0 L (7.0 Gal.)
Battery 12V – 70A


Engine model Toyosha S148
Fuel Diesel
Displacement 1.5 L, 1,477 L (90.1
Bore x stroke 97.0 x 100.0 mm (3.82 x 3.92 in)
Power output 28.0 HP (20.9 kW)
Starter type Electric starter Hitachi S13-31
Oil type
Oil Capacity 4.0-4.7 L (4.2-5.0 qt.)
Coolant capacity 5.0 L (5.3 qt.)

Tires size

Front tires Ag: 5.0×15
Turf / Lawn: 20×8.0-10
Rear tires Ag: 12.4×24
Turf: 13.6×16, 20×8.00-10

Transmission and chassis

Chassis 4×2 2WD
Steering Mechanical
Transmission type Sliding gear
Gears 12 forward and 3 reverse
Ground speed Forward: up to 20.9 km/h (13.0 mph)
Reverse: up to 14.8 km/h (9.2 mph)
Transmission oil capacity 25.5 L (6.7 Gal)

PTO (Power take-off shaft)

PTO Type: Rear, transmission PTO
PTO Speed: 540 rpm

Hydraulic lift

3-point linkage Category I
Control system
No. of remote valves 1
Max lifting capacity (at link end)

Hydraulic system

Type Open center
Pump flow 20.6 l/m (5.44 GPM)
Oil Capacity 25.5 L (6.7 Gal)

Allis Chalmers 5030 Attachments

Allis Chalmers 430 Loader

Loader weight: 552 lbs
250 kg
Height (to pin): 91 inches
231 cm
Dump reach: 18 inches
45 cm
Dump angle: 45°
Clearance, level bucket: 77 inches
195 cm
Rollback angle: 15°
Breakout force (lift): 920 lbs
417 kg
Lift to full height (at pin): 720 lbs
326 kg
Bucket width: 48 inches
121 cm

Allis Chalmers 5030 Specs Review


That’s everything you need to know about the Allis Chalmers 5030 review, attachments, and features of the Allis Chalmers 5030

But if you have questions about this post, please leave a comment in the box below. I’ll do my best to help you as soon as I can. Thanks. For more information visit our website:

Similar Posts