Allis Chalmers 7010 Specs, Weight, Price & Review
If you’re searching for Allis Chalmers 7010 Specs price, reviews, Weight, and features, you’ve come to the right place.
Our commercialvehicleinfo team has confirmed this information with several Case associates and agents. Let’s discuss Allis Chalmers 7010 Specs, price and reviews.
It can be challenging to find complete information online. We recommend that you save your valuable time and energy.
Our commercialvehicleinfo team has compiled complete and step-by-step information on Allis Chalmers 7010 Specs price and reviews, Weight, and features to make your search easier.
About Allis Chalmers 7010 Specs
The Allis Chalmers7010 is an Allis Chalmers 2WD row-crop tractor that was manufactured in West Allis (Wisconsin), USA, from 1980 to 1981.
The Allis Chalmers 7010 has a 4.9L (301.0 cu*in), six-cylinder diesel engine. It also comes with one of three transmissions: a partial shift transmission with 16 forward gears and 4 reverse,
a partial shift transmission that shifts between forward and reverses with 20 gears and reverse gears, or a partial shift transmission with 12 forward gears and 2 reverse.
Allis Chalmers 7010 row crop tractor used the Allis Chalmers 649T motor. It has a 4.9L, 4932 cm 2, (301.0 cu*in), six-cylinder turbocharged Diesel engine.
The cylinder bore is 98.0mm (3.86 in), and the stroke is 108.0mm (4.25 inches). The compression ratio rating of this engine is 16.25 to 1. This engine produced 119.7 PS (88.0kW; 118.0HP) at 2200 rpm.
Allis Chalmers 7010 has hydrostatic power steering, differential hydraulic disc brakes, and the Acousta-Cab (optional) with heat or Four-post ROPS. It also comes with a 204.4 litre (54 US gall. ; 45 Imp. gal) fuel tank.
Allis Chalmers 7010 Price
1979 ALLIS-CHALMERS 7010 Price:USD $5,700.00
Allis Chalmers 7010 Weight
11,260 lbs 5107 kg
Allis Chalmers 7010 Engine oil capacity
54 gal 204.4 L
Allis Chalmers 7010 Model
1980 – 1981
Allis Chalmers 7010 Engine
Allis Chalmers 4.9L 6-cyl diesel
Allis Chalmers 7010 Serial Numbers
| 1979 | 1001 |
| 1980 | 1925 |
| 1981 | 2806 |
Allis Chalmers 7010 Specs
General Specifications
| Model | Allis Chalmers 7010 |
| Length | – |
| Width | 2,350 mm (92.5 in) |
| Height (exhaust) | 2,940 mm (115.7 in) |
| Wheel base | 2,690 mm (105.9 in) |
| Weight | 5,110 kg (11,266 lbs) |
| Fuel tank capacity | 204.4 liters (54 US gal.; 45 Imp. gal) |
| Battery | 12V, 95Ah, one or two (optional) |
| Cabin type | Acousta-Cab with heat or Four-post ROPS (optional) |
Engine
| Engine model | Allis Chalmers 649T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 4.9 L, 4,932 cm2, (301.0 cu·in) |
| Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
| Compression ratio | 16.25:1 |
| Horsepower | 119.7 PS (88.0 kW; 118.0 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 18.9 L (20 US. qt, 16.6 Imp. qt.) |
| Coolant capacity: | 24.6 L (26 US. qt, 21.6 Imp. qt.) |
Transmission and chassis
| Chassis | 4×2 2WD |
| Steering type | Hydrostatic power |
| Brakes | Differential hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Power |
| Transmission model | Power Director |
| Transmission type | Partial power shift |
| Gears | 16 forward and 4 reverse |
| Speed | Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph) |
| Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
| Transmission model | Power Director |
| Transmission type | Partial power shift |
| Gears | 20 forward and 4 reverse |
| Speed | Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph) |
| Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
| Transmission model | Power Shift |
| Transmission type | Partial power shift |
| Gears | 12 forward and 2 reverse |
| Speed | Forward: 26.9 kmh (16.7 mph) Reverse: 11.6 (7.2 mph) |
| Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
Tires
| Front tires | Ag: 10.00-16 |
| Rear tires | Ag: 18.4-38 |
Three-Point Hitch
| Caterogy | III/II |
| Control type | – |
| Lift capacity (at 610 mm /24 in) | 3,030 kg (6,680 lbs) |
PTO (Power take-off shaft)
| Rear PTO type | Independent |
| Rear PTO speed | 540/1,000 rpm |
Hydraulic system
| Hydraulic type | Closed center |
| Hydraulic capacity | 28.0 L (29.59 US. qt, 24.64 Imp. qt.) |
| Valves | 2 |
| Pump flow | 22.0 gpm (83.3 lpm) Transmission: 13.5 gpm (51.1 lpm) |
| Steering flow | 9.5 gpm (36 lpm) |
| Total flow | 45.0 gpm (170.3 lpm) |
Allis Chalmers 7010 Specs Review
Conclusion
That’s everything you need to know about the Allis Chalmers 7010 review, attachments, and features of the Allis Chalmers 7010
But if you have questions about this post, please leave a comment in the box below. I’ll do my best to help you as soon as I can. Thanks. For more information visit our website: Commercialvehicleinfo.com
