Farmall 130 Specs, Weight, Price, Overview, Horsepower, Features, Review.
I have included all the information about the Farmall 130 on this page, including the Farmall 130 specifications, Weight, Price, and Dimensions.
We aim to give our readers factual information, thus we only use official sources when researching the Farmall 130.
This article, which has been updated, has all the information you need to know about the Farmall 130.
Farmall 130 Overview
The Farmall 130 is a two-wheel-drive row-crop tractor produced by Farmall (a division of International Harvester) from 1956 to 1958.
The Farmall 130 has a 2.0 L (122.7 cuin) four-cylinder gasoline engine and sliding gear transmission with four forward and one backward gear as well as a dry disc clutch.
The International Harvester C-123 engine powered the Farmall 130 row-crop tractor. It has a 2.0 L, 2,011 cm2, (122.7 cuin)
four-cylinder natural aspirated gasoline engine with a cylinder bore of 79.0 mm (3.11 in) and a piston stroke of 102.0 mm (4.02 in). The compression factor is 6.8:1.
Farmall 130 New Price
Farmall 130 Price: $82,742
Farmall 130 Weight
Farmall 130 Operating Weight: 2,800 lbs
Farmall 130 Horsepower
Farmall 130 Engine Horsepower: 19.91 hp
Farmall 130 Specifications
Engine
| Engine model | International Harvester C-123 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline |
| Oil capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
| Compression ratio | 6.8:1 |
| Starter | Electric |
| Bore and stroke | 79.0 mm X 102.0 mm (3.11 in X 4.02 in) |
| Displacement | 2.0 L, 2,011 cm2, (122.7 cu·in) |
| Horsepower | – |
| Coolant capacity: | 14.2 L (15 US. qt, 12.5 Imp. qt.) |
General Spec
| Model | Farmall 130 |
| Ground clearance | 550 mm (21.7 in) High crop: 680 mm (26.8 in) |
| Height (steering wheel) | 1,650 mm (65 in) |
| Length | 2,710 mm (106.7 in) |
| Wheelbase | 1,800 mm (70.9 in) |
| Width | 1,420 mm (55.9 in) |
| Cabin type | Open operator station |
| Fuel tank capacity | 41.6 litres (11 US gal.; 9.2 Imp. gal) |
| Battery | 12V |
| Weight (operating) | 1,270 kg (2,800 lbs) |
Transmission and chassis
| Chassis | 4×2 2WD |
| Transmission type | Sliding gear with dry disc clutch |
| Brakes | Differential mechanical contracting band |
| Steering type | Manual |
| Transmission model | – |
| Speed | Forward: 16.1 kmh (10.0 mph) Reverse: 4.7 kmh (2.9 mph) |
| Gears | 4 forward and 1 reverse |
Three-Point Hitch
| Category | IH Fast-Hitch (1-arm) |
| Control type | – |
| Lift capacity (at ends) | – |
PTO (Power take-off shaft)
| Rear PTO type | – |
| Rear PTO speed | 540 rpm |
Farmall 130 Review
The Case IH Farmall 130 stands out as a versatile and robust tractor ideally designed for an array of tasks, encompassing haying, baling, tillage, and loader work. It boasts a 4.5-liter, four-cylinder turbocharged engine delivering 130 horsepower and 390 lb-ft of torque.
The Farmall 130 is offered with a choice of either a 12×12 powershift transmission or a continuously variable transmission (CVT), catering to various preferences and needs.
Full review YouTube video check here.
Conclusion
After research, I have provided information about Farmall 130 Specs, Weight, Price & Review in this post. So I hope you liked this article. If you liked then share this article with your friends, family, and relatives.
And if you still feel that I have left out something in this post then you can tell me in the comment box below.
FAQs – Farmall 130
Q.1 What years was the Farmall 130 made?
Ans. The Farmall 130 was produced from 1956 to 1958.
Q.2 How much horsepower does a Farmall 130 have?
Ans. does a Farmall 130 horsepower 19.91 hp 14.8 kW
Q.3 What is the price of Farmall 130?
Ans. The Farmall 130 costs $82,742
This article I have created this to give you complete information about the Farmall 130 Specs, Price with its Review.
Check out the given details which help you to know about the Farmall 130 Specs, Price with its Review.
For more information visit our website: Commercialvehicleinfo.com
