Farmall 300 Specs, Weight, Price, Overview, Horsepower, Review & Fuel Tank Capacity

Farmall 300 Specs: Here in this post, I have taken all the details about Farmall 300 from the ( Official Site ) including Farmall 300 specs, Weight, Price & Dimension.

we believe to provide accurate details to our readers and we prefer only official sources for information about Farmall 300.

All the details which you want to know about Farmall 300 you can find in this article which is updated.

Farmall 300


Farmall 300 Overview

The Farmall 300 is a two-wheel-drive row-crop tractor produced by Farmall (a division of International Harvester) between 1954 and 1956.

The Farmall 300 is equipped with either a sliding gear transmission with five forward and one reverse gear or a partial power shift transmission with ten forward and two reverse gears.

The engine of the Farmall 300 row-crop tractor was an International Harvester C169.

It is a 2.8 L, 2,769 cm2 (169.0 cuin), four-cylinder, naturally aspirated gasoline engine with a cylinder bore of 90.0 mm (3.54 in) and a piston stroke of 108.0 mm (4.25 in). The ratio of compression is 6.6:1.

Farmall 300 New Price

 Price: $2900(1956)

Farmall 300 Weight

 Operating Weight: 5361 lbs

Farmall 300 Horsepower

 Engine Horsepower: 38.42 hp

Farmall 300 Fuel Tank Capacity

 Fuel Tank Capacity: 64.3 L

Farmall 300 Serial Number

Years Serial Number
1954 501
1955 1779
1956 23224

Farmall 300 Specifications

General Specifications

Model Farmall 300
Length Tricycle: 3,450 mm (136.0 in)
Wide-front: 3,550 mm (139.8 in)
Width 2,540 mm (100 in)
Height 1,950 mm (76.8 in)
Wheelbase Tricycle: 2,340 mm (92.2 in)
Wide-front: 2,430 mm (95.7 in)
Weight 2,430 kg (5,357 lbs)
Fuel tank capacity 64.3 litres (17 US gal.; 14.1 Imp. gal)
Battery 6V
Cabin type Open operator station


Engine model International Harvester C169
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 2.8 L, 2,769 cm2, (169.0 cu·in)
Bore and stroke 90.0 mm X 108.0 mm (3.54 in X 4.25 in)
Compression ratio 6.6:1
Starter Electric
Coolant capacity: 15.6 L (16.5 US. qt, 13.7 Imp. qt.)

Transmission and chassis

Chassis 4×2 2WD
Steering type
Transmission model
Transmission type Sliding gear
Gears 5 forward and 1 reverse
Speed Forward: 26.0 kmh (16.2 mph) Reverse: 5.0 (3.1 mph)
Transmission model Torque Amplifier
Transmission type Partial power shift
Gears 10 forward and 2 reverse
Speed Forward: 26.0 kmh (16.2 mph) Reverse: 5.0 (3.1 mph)


Rear tires Ag: 11.00-38
Front tires Ag: 5.50-16

Rear Hitch

Type IH Fast Hitch

PTO (Power take-off shaft)

Rear PTO speed 540 rpm
Rear PTO type

Farmall 300 Review

The Farmall 300 is a utility tractor that was produced by International Harvester from 1954 to 1956. It was powered by a 169-cubic-inch inline four-cylinder engine that produced 40 horsepower. The tractor was available with a variety of options, including a live power take-off, hydraulic lift, and three-point hitch.

The Farmall 300 was a popular tractor for small farms and homesteads. It was known for its reliability, versatility, and ease of maintenance. The tractor was also relatively affordable, making it a good value for the money.

For more details check out the Youtube video


After research, I have provided information about Farmall 300 Specs, Weight, Price & Review in this post.

So I hope you liked this article. If you liked then share this article with your friends, family, and relatives.

And if you still feel that I have left out something in this post then you can tell me in the comment box below.

FAQs – Farmall 300



Q.1 How much horsepower is a Farmall 300?

Ans. 35.43 hp horsepower Farmall 300

Q.2 How much is Farmol 300 Price?

Ans. Farmol 300 Price is $2900(1956).

This article I have created this to give you complete information about the Farmall 300 Specs, Price with its Review.

Check out the given details which help you to know about the Farmall 300 Specs, Price with its Review.

For more information visit our website:

Similar Posts