Ingersoll 4016 Specs, Weight, Price, Overview, Horsepower, Review, Attachments, Fuel Tank Capacity
I have taken all The details about Ingersoll 4016 from the (official site) Including Ingersoll 4016 specs, Weight, Price & Dimension.
We Believe in providing Correct information To our users And choose only legitimate sources for Ingersoll 4016 information. This Revised page contains all of the Information you need to know about the Ingersoll 4016.
Ingersoll 4016 Overview
The Ingersoll 4016 is a 4000 series 2WD garden tractor. From 1989 through 2004, Ingersoll produced this tractor in Winneconne, Wisconsin, USA. The Ingersoll 4016 is powered by one of two engines: a 0.7 L (43.3 cuin) two-cylinder gasoline engine or a 0.5 L (29.3 cuin’) two-cylinder gasoline engine, Both of which Are mated to a hydrostatic transmission with Unlimited forward and reverse (2-range) gears.
Ingersoll 4016 Price
Ingersoll 4016 Price: USD $1,125.00
Ingersoll 4016 Weight
Ingersoll 4016 Operating Weight: 765 lbs 347 kg
Ingersoll 4016 Horsepower
Ingersoll 4016 Horsepower: 16 HP
Ingersoll 4016 Fuel Tank Capacity
Ingersoll 4016 Fuel tank capacity: 11.4L
Ingersoll 4016 Specifications
General Specifications |
|
Model | Ingersoll 4016 |
Cabin type | Open operator station |
Weight | 347 kg (765 lbs) |
Wheelbase | 1,210 mm (47.6 in) |
Length | 1,820 mm (71.7 in) |
Ground clearance (rear axle) | 270 mm (10.6 in) |
Width | 1,040 mm (40.9 in) |
Battery | 12V, CCA 300A |
Height (steering wheel) | 1,100 mm (43.3 in) |
Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
Engine |
|
Engine model | Onan P216 |
Fuel type | Gasoline |
Compression ratio | 6.5:1 |
Horsepower | 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm |
Engine type | Four-stroke, air-cooled |
Bore and stroke | 83.0 mm X 73.0 mm (3.27 in X 2.87 in) |
Spark plug | Champion RS14YC |
Displacement | 0.7 L, 709 cm2, (43.3 cu·in) |
Cylinders | 2 |
Starter | Electric |
Transmission and chassis |
|
Chassis | 4×2 2WD |
Transmission model | Hy-drive |
Gears | Infinite forward and reverse (2-range) |
Steering type | Manual |
Transmission type | Hydrostatic |
Brakes | – |
Tires |
|
Front tires | Ag: 16×6.50-8 |
Rear tires | Ag: 32×8-16 |
Three-Point Hitch |
|
Category | 0 (optional) |
Lift capacity (at ends) | – |
Control type | – |
Hydraulic system |
|
Pressure | Transmission: 2100 psi (144.8 bar) Lift: 575 psi (39.6 bar) |
Hydraulic type | Open center |
Valves | 2 |
Pump flow | 8.0 GPM (30.3 lpm) |
Ingersoll 4016 Review
The Ingersoll 4016 is a garden tractor that was produced by Ingersoll Equipment Company from 1983 to 2005. It is known for its durability, reliability, and performance. The 4016 is powered by a 16-horsepower Briggs & Stratton Vanguard engine and features a hydraulic transmission.
It is equipped with a 50-inch cutting deck, but can also be used with a variety of other attachments, such as a snow blower, tiller, and loader.
Full review YouTube video check here.
Ingersoll 4016 Attachments
44″ mid-mount mower deck 48″ mid-mount mower deck 60″ mid-mount mower deck Snowblower Blade Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. |
Conclusion
That was all there was to know about the Ingersoll 4016 Pricing, Specifications, Review, and Important Features; nevertheless, if you have any questions about this topic, kindly leave a message below in the comment Box. We will Respond to your question as Soon As We can.
FAQs – Ingersoll 4016