Massey Ferguson 1085 Specs, Weight, Price & Review ❤️

Massey Ferguson 1085 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Attachments, Features & Pictures

If you’re looking for Massey Ferguson 1085 price, specs, reviews, weight, and features, you’ve come to the right place. Our team has confirmed this information with several Massey Ferguson representatives and associates.

Let’s discuss Massey Ferguson 1085 price, specifications, and reviews.

Finding complete information on the internet can be challenging. Therefore, we prefer that you save your precious energy and time.

Our team has compiled complete and step-by-step information on Massey Ferguson 1085 price, specs, reviews, weight, and features to make your search easier.

So, without further ado, let’s get to the main topic.

Massey Ferguson 1085 Specs

Massey Ferguson 1085 Price

Original price: $17,000 (1978 )

1085 Massey Ferguson HP

Massey Ferguson 1085 HP: 81 hp 60.4 kW

Massey Ferguson 1085 Engine

Perkins A4.318 engine

Massey Ferguson 1085 Weight

Massey Ferguson 1085 Weight: 8400 to 11540 pounds

Massey Ferguson 1085 Oil Capacity

Massey Ferguson 1085 Oil Capacity: 9 Qts 8.5 L

Massey Ferguson 1085 Serial Numbers

1085 Serial Numbers

Location: In front of the instrument panel on the left side.
1972: 9B36563
1973: 9B36841
1974: 9B42685
1975: 9B50494
1976: 9B58735
1977: 9B66276
1978: 9B74241
1979: 9B76058

Massey Ferguson 1085 Specifications

General Specifications

Model Massey Ferguson 1085
Length 3,900 mm (153.5 in)
Width 2,900 mm (114.2 in)
Height (steering wheel) 2,000 mm (78.7 in)
Wheelbase 2,470 mm (97.2 in)
Ground clearance (drawbar) 420 mm (16.5 in)
Weight (operating) 5,235 kg (11,541 lbs)
Fuel tank capacity 170.3 liters (45 US gal.; 37.5 Imp. gal)
Battery Two 12V
Cabin type Open operator station or cab with air-conditioning (optional)

Engine

Engine model Perkins A4.318
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 5.2 L, 5,211 cm2, (318.0 cu·in)
Bore and stroke 114.0 mm X 127.0 mm (4.49 in X 5 in)
Compression ratio 17.5:1
Horsepower 82.1 PS (60.4 kW; 81.0 HP) at 2,000 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 15.6 L (16.5 US. qt, 13.7 Imp. qt.)

Transmission and chassis

Chassis 4×2 2WD
Steering type Power
Brakes Mechanical disc
Transmission model Multi-Power
Transmission type Partial power shift with dry disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 31.0 kmh (19.3 mph) Reverse: 14.8 (9.2 mph)
Transmission model
Transmission type Gear type
Gears 8 forward and 2 reverse
Speed Forward: 28.8 kmh (17.9 mph) Reverse: 11.2 (7 mph)

Tires

Front tires Ag: 10.00-16
Rear tires Ag: 18.4-34

Three-Point Hitch

Category III/II
Control type Position and draft control
Lift capacity (at ends) 1,610 kg (3,550 lbs)

PTO (Power take-off shaft)

Rear PTO type Live
Rear PTO speed 540/1,000 rpm

Hydraulic system

Hydraulic type
Hydraulic capacity 32.2 L (34.03 US. qt, 28.33 Imp. qt.)
Pressure 2300 psi (158.6 bar)
SCV flow 10.0 GPM (37.9 lpm)
Steering flow 5.0 GPM (18.9 lpm)

Massey Ferguson 1085 Review Video

Massey Ferguson 1085 Attachments

Massey Ferguson 246 Loader

Height (to pin): 156 inches
396 cm
Breakout force (lift): 5000 lbs
2268 kg
Lift to full height (at pin): 4500 lbs
2041 kg
Bucket width: 60 inches
152 cm
72 inches
182 cm
84 inches
213 cm

Massey Ferguson 1085 Problems

Massey Ferguson 1085 Engine Troubleshooting

The engine starts hard or doesn’t start

clogging of the fuel filter. Clean or replace the filter. There is air clogging the fuel system. Air is bleeding. It’s possible that the fuel injection nozzles are broken or obstructed. reposition the fuel injection nozzles. damage to the fuel injection pump Alternatively, replace the gasoline pump with a new one.

Diesel starts and stops

The gasoline filter is compromised. Modify the filter element. The fuel injection pump is faulty. Replace or fix the injection pump. Air purifier that is blocked. Clean air cleaner element.

Engine overheats

The filtering of the radiator is dirty or has a defect. cap on the radiator. Clean the radiator or replace the cap. Insufficient coolant in the engine. Inspect the coolant fluid, and then the coolant system to see if there are leaks. The fan belt is worn or damaged. Belt replacement is suggested. The engine oil level is low. Make sure to replenish the oil in the engine.

Engine power is reduced

Defective injection nozzle. Clean or replace injection nozzles. Fuel lines or hoses with restrictions. Clean fuel lines and fuel hoses. The air filter is dirty. Install a new air filter element. The gasket of the cylinder head is blowing. Replacement of the gasket in the cylinder head is required.

Massey Ferguson 1085 Transmission Troubleshooting

Transmission is making noise

The incorrect backlash is causing the gears to become damaged. Adjust backlash correctly as well as replace any gears. Damaged or worn shifting forks for gears. The shift forks must be replaced. Worn or stuck shaft splines. Install a new shaft. The oil levels are low. It is necessary to add transmission oil. Worn or broken bearings. Replace damaged bearings. The transmission fluid has been dirty. Replace the fluid.

Low transmission pressure

The transmission’s fluid level is low. Fill the gearbox housing with fluid. The transmission oil’s filter element is clogged (if installed). Clean or replace the filter. relief valve malfunction. Adjust the valve.

Massey Ferguson 1085 Hydraulic System Troubleshooting

Excessive hydraulic system heat

wrong hydraulic oil type. You must use the right sort of hydraulic oil. hydraulic oil contamination Change the oil. In your hydraulic system, there is air. bleeding air The primary relief valve required repair. Switch out the relief valve.

Hydraulic oil pressure is insufficient

Hydraulic oil is insufficient. The oil must be added. It is obstructed in the hydraulic oil filter. If necessary, swap out the hydraulic filter or fix it. Hydraulic pipe leaks. Find system leaks and patch them up. an incorrectly set hydraulic spool valve. The spool valve should be correctly adjusted. There may be damage to the hydraulic pump. The hydraulic oil pump may need repair or replacement. There is a broken hydraulic cylinder. The hydraulic cylinder should be fixed or replaced.

Hitch can’t lift or lifts too slowly

Hydraulic pump damage. Replace the hydraulic pump. Main relief valve malfunctions. Replace the relief valve. Hydraulic spool valve damage. Fix the hydraulic valve. Hydraulic cylinder damage. Fix the hydraulic cylinder. Low hydraulic oil. Hydraulic fluid refill. Dirty hydraulic fluid filters. Fix or replace the filter. Overloaded hitch. Reduce hitch load.

Jerky lowering or lifting of the hitch

Fluid pollution. Replace hydraulic fluid. Pump broken. Fix the hydraulic pump. Hydraulic air leaks. Hydraulic air has been drained. Hydraulic spool valve damage. Replace or repair the valve. Broken hydraulic cylinder. Fix the hydraulic cylinder.

Massey Ferguson 1085 Electrical System Troubleshooting

The battery cannot be charged

The connections between the electrical cables are broken or loose. Tighten or clean connections. The battery’s connections are damaged. Switch out the terminal connections. The battery doesn’t function. Switch out the battery. The belt is sloppy or broken. It is necessary to replace or modify the belt.

Starter cranks slow

The voltage of the battery might be low. It has been charged. Rapid battery drain. Replace the battery completely or fix the charging method. wires that have been cut off or damaged battery terminals. Check your cable’s connections, and if necessary, replace or repair the terminals.

The starter motor is not working

The battery is worn or drained. Recharge or replace the battery. Cables for batteries are broken or not properly connected. Verify cables and reconnect as necessary. The battery’s power is not sufficient. Charge the battery. The starter motor has been damaged. Replace or repair the starter.

Massey Ferguson 1085 FAQs

What is a Massey Ferguson 1085 worth?

Another great feature This 1974 Massey Ferguson 1085 tractor has been repainted, has an open station, and has 3,243 hours of use. I’ve included a picture of it here. Prices reached $9,500….

Massey Ferguson 1085 Tractor Sold for Record Price Saturday.

Calendar Year
2018
Avg. Auction Price $3,557
High $5,500
Low $2,100

How many horsepower is a Massey Ferguson 1085?

Massey Ferguson 1085 Power
PTO (claimed): 81 hp 60.4 kW
Drawbar (tested): 69.16 hp 51.6 kW
PTO (tested): 81.58 hp 60.8 kW

What engine is in a Massey Ferguson 1085?

Massey Ferguson 1085 Engine
Engine Detail
Perkins A4.318
liquid-cooled
Displacement: 318 ci 5.2 L
Bore/Stroke: 4.50×5.00 inches 114 x 127 mm

Conclusion

That’s all there is to know about The Massey Ferguson 1085 Tractor Price, Specs, Review, and Key Features; nevertheless, if You Have Any Questions About this topic, kindly put Them in the comment section below. We will respond to your inquiry as soon as possible. To see more such posts visit my site:- Commercialvehicleinfo.com