Wheel Horse 417A Specs, Weight, Price, Overview, Horsepower, Review, Attachments
I have included all the information about the Wheel Horse 417A on this page, including the Wheel Horse 417A specifications, Weight, Price, and Dimension.
We aim to give our readers factual information, thus we only use official sources when researching the Wheel Horse 417A.
This article, which has been updated, has all the information you need to know about the Wheel Horse 417A.
Wheel Horse 417A Overview
The Wheel Horse 417-A is a two-wheel garden tractor in the series 400. The tractor was made in the USA by Wheel Horse in South Bend, Indiana, USA from 1985 until 1986.
It is the Wheel Horse 417-A is fitted with the 0.7 (or 42.2 cu*in) (42.2 cubic centimeters) 2-cylinder gasoline engine, as well as a hydrostatic belt-driven transmission that has an infinite reverse and forward gears.
This Wheel Horse 417A garden tractor employed the Kohler KT17QS motor. It’s an 0.7 L 691 centimeter 2., (42.2 cu*in) two-cylinder gasoline engine that is natural aspirated, with 79.0 millimeters (3.11 inch) of the bore of the cylinder and 70.0 millimeters (2.76 inches) of the stroke.
The engine also produced 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm of output power.
Wheel Horse 417-A Wheel Horse 417-A comes with a manual steering system with an operator station that is open, and 11.4 Liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Wheel Horse 417A Price
WH 417A NEW Price: $700.00
Wheel Horse 417A Weight
Operating Weight: 633 lbs (287 kg)
Wheel Horse 417A Horsepower
Horsepower: 17.0 HP (12.7 kW) at 3,600 rpm
Wheel Horse 417A Fuel Tank Capacity
Fuel Tank Capacity: 11.4 liters (3 US gal.; 2.5 Imp. gal)
Wheel Horse 417A Specifications
General Specifications
| Model | Wheel Horse 417A |
| Length | 1,650 mm (65 in) |
| Width | 960 mm (37.8 in) |
| Height | 1,050 mm (41.3 in) |
| Wheelbase | 1,150 mm (45.3 in) |
| Weight | 287 kg (633 lbs) |
| Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
Engine
| Engine model | Kohler KT17QS |
| Engine type | Four-stroke, air-cooled |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 691 cm2, (42.2 cu·in) |
| Bore and stroke | 79.0 mm X 70.0 mm (3.11 in X 2.76 in) |
| Horsepower | 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm |
| Starter | Electric |
Transmission and Chassis
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | – |
| Transmission model | Eaton 1100 |
| Transmission type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 11.3 kmh (7 mph) |
| Reverse: 7.2 kmh (4.5 mph) |
Tires
| Front tires | Lawn/turf: 15×6.00-6 |
| Rear tires | Lawn/turf: 22×7.50-12 |
Three-Point Hitch
| Category | Sleeve hitch |
| Control type | N/A |
| Lift capacity (at ends) | N/A |
Wheel Horse 417A Review
The Wheel Horse 417A is a classic garden tractor that was manufactured from 1971 to 1973. It is driven by a 17-horsepower Kohler K341 engine and features a hydrostatic transmission, along with four-wheel drive capabilities. Additionally, it is equipped with a three-point hitch, allowing it to work with a wide range of attachments.
The 417A holds a special place in the hearts of collectors and hobbyists. Renowned for its reliability, durability, and user-friendly operation, it’s a sought-after choice among those who appreciate vintage garden tractors. Moreover, its affordability further enhances its appeal, delivering good value for the investment.
For more details check out the Youtube video
Wheel Horse 417A Attachment
- 36″ Mid-mount Mower Deck
- 42″ Mid-mount Mower Deck
- 48″ Mid-mount Mower Deck
36″ Mower Deck
| Mower Deck Type | Mid-mount, rear-discharge |
| Number of Blades | 3 |
| Cutting Width, in (mm) | 36 (910) |
| Lift System | Hydraulic |
| Weight, lb (kg) | 102 (46) |
42″ Mower Deck
| Mower Deck Type | Mid-mount, right-discharge |
| Number of Blades | 3 |
| Cutting Width, in (mm) | 42 (1060) |
| Lift System | Hydraulic |
| Weight, lb (kg) | 135 (61) |
48″ Mower Deck
| Mower Deck Type | Mid-mount, right-discharge |
| Number of Blades | 3 |
| Cutting Width, in (mm) | 48 (1215) |
| Lift System | Hydraulic |
| Weight, lb (kg) | 168 (76) |
Conclusion
That was all about the Wheel Horse 417A Price, Specs, Review, and Key Features, but if you have any queries regarding this post, then please comment below in the comment box, We will solve your problem as soon as possible, thanks for visiting our site and stay tuned to our site for more new stuff like this.
Wheel Horse 417A FAQ
Q. What kind of tractor is a Wheel Horse 417A?
Ans. The Wheel Horse 417-A is a garden tractor from the 400 series with two-wheel drive. From 1985 to 1986, this tractor was made by Wheel Horse in South Bend, Indiana, USA.
This article I have created to give you complete information about the Wheel Horse 417A Specs, Price with its Review.
Check out the given details which help you to know about the Wheel Horse 417A Specs, Price with its Review.
For more information visit our website: Commercialvehicleinfo.com
