AGCO DT160 Specification, Engine, Serial Number, Price & Review
If you’re looking for Agco DT160 price, specs, reviews, weight, and features, you’ve come to the right place. Our team has confirmed this information with several Agco representatives and associates.
Let’s discuss the Agco DT160 price, specifications, and reviews. Finding complete information on the internet can be challenging. Therefore, we prefer that you save your precious energy and time.
Our team has compiled complete and step-by-step information on the Agco DT160 price, specs, reviews, weight, and features to make your search easier.
So, without further ado, let’s get to the main topic.
About Agco DT160
The AGCO DT160 is a row-crop tractor with four-wheel drive from the DT line. From 2002 to 2004, this tractor was made by AGCO in Beauvais, France.
The AGCO DT160 features an electro-hydraulic wet disc clutch in addition to a full power shift transmission with 18 forward speeds and 6 reverse gears. The engine of the AGCO DT160 is 8.3 liters in capacity.
The Cummins C8.3 engine was in the AGCO DT160 row-crop tractor. It has a bore of 114.0 mm (4.49 in), a stroke of 135.0 mm (5.31 in), and a displacement of 8.3 L, 8,275 cm2, (505 cu in) for its six-cylinder turbocharged diesel engine.
The ratio of compression is 17.2:1. At 2,200 rpm, this engine made its most power (119.3 kW, or 160 HP), and at 1,250 rpm, it made its most torque (730 Nm, or 538 ftlb).
The AGCO DT160 has a cabin (standard), hydraulic wet disc brakes, hydrostatic power steering, and a fuel tank capacity of 455 liters (120.2 US gal; 100.1 Imp. gal).
AGCO DT160 Price
Agco DT160 price is $38,700.00
AGCO DT160 Engine
AGCO DT160 has a Cummins 8.3L 6-cyl diesel engine
AGCO DT160 Serial Number
| 2002 | L001001 |
| 2003 | M001001 |
| 2004 | N001001 |
AGCO DT160 Specs
| Make | AGCO |
| Model | DT160 |
| Company Country | United States |
| Production years | From 2002 Until 2004 |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Price | – |
| Total build | – |
| Engine size | 505 ci or 8.3 L |
| Number of cylinders | 6 cylinders |
| Horsepower | – |
| Power RPM | 2200 (rpm) |
| Engine torque | 538 lb-ft or 729.5 Nm |
| Engine torque RPM | 1251 (rpm) |
| Fuel type | diesel |
| Fuel tank capacity | 120 gal or 454.2 L |
| Compression ratio | 17.3:1 |
| Bore stroke | 4.488×5.315 inches or (114 x 135 mm) |
| Transmission type | full power shift |
| Transmission gears | 18 forward and 6 reverse |
| Clutch system | electro-hydraulic wet disc |
| Hydraulic system | closed center pressure flow compensated |
| Number of valves | 4 |
| Pump flow rate | 29 GPM or 109.8 lpm |
| Hydraulic pressure | 2900 psi or 200.0 bar |
| PTO claimed power | 160 hp or 119.3 kW |
| PTO real power | 168.30 hp or 125.5 kW |
| PTO clutch system | – |
| Rear PTO system | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO system | – |
| PTO fuel consumption | 10.5 gal/hour or 39.7 l/hour |
| Weight | 18,500 lbs or 8391 kg |
| Length | 203 inches [515 cm] |
| Width | 98.2 inches [249 cm] |
| Height | 121 inches [307 cm] |
| Wheelbase | 121 inches [307 cm] |
| Ground clearance | – |
| Number of batteries | – |
| Battery voltage | 12 V |
| Electric ground force | negative |
| Electric charging system | alternator |
| Engine starter volts | 12 V |
| Wheel drive | 4×4 MFWD 4WD |
| Steering system | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard |
| Drawbar real power | 142.58 hp or 106.3 kW |
| Drawbar fuel consumption | 10.4 gal/hour or 39.4 l/hour |
| Max drawbar pull | 20,868 lbs or 9465 kg |
| Hitch control system | – |
| Rear hitch | 3/3N |
| Rear hitch lift | 16,000 lbs or 7257 kg |
AGCO DT160 Review
The AGCO DT160, a versatile and reliable tractor produced from 2002 to 2007, found favor among farmers and agricultural operations for its strong performance, fuel efficiency, and cost-effectiveness. It excelled in a wide spectrum of tasks, including tillage, planting, harvesting, and hauling.
For more details check out youtube video
AGCO DT160 Attachments
AGCO FL600 Loader |
|
| Height (to pin) | 181 inches 459 cm |
| Clearance dumped a bucket | 152 inches 386 cm |
| Dump reach | 26 inches 66 cm |
| Dump angle | 47° |
| Reach the ground | 103 inches 261 cm |
| Rollback angle | 38° |
| Breakout force (bucket) | 6952 lbs 3153 kg |
| Lift to full height (at pin) | 7641 lbs 3465 kg |
| Bucket width | 96 inches 243 cm |
| Raise time to the height | 6.1 s |
| Bucket dump time | 2.7 s |
| Lowering time | 4.4 s |
| Rollback time | 2.2 s |
Conclusion
That’s all there is to know about the Agco DT160 Price, Specifications, Review, and Key Features. If you have any questions about this post, please leave a comment below, and we’ll get back to you as soon as we can. Thanks for visiting our site, and stay tuned for more new stuff like this.
This article I have created to give you complete information about the Agco DT160 Specs, Price with its Review.
Check out the given details which help you to know about the Agco DT160 Specs, Price with its Review.
For more information visit our website: Commercialvehicleinfo.com
