CaseIH 9210 Price, Specs, Serial Numbers, Reviews, Horsepower, Engine Oil Capacity, Attachments
In this post, I have gathered all of the information on the CaseIH 9210 from the (official site), including CaseIH 9210 features, weight, price, and dimensions.
We believe in providing correct information to our readers and recommend only legitimate sources for CaseIH 9210 information.
This updated article has all of the information you need to know about CaseIH 9210.
About CaseIH 9210
The Case IH 9210 is a 4WD tractor from the 9200 series. It was made at Case IH’s factory in Fargo, North Dakota, from 1990 to 1995.
The Case IH 9210 tractor has an 8.3-liter (504.5-cubic-inch) CDC diesel engine and a full drivetrain transmission with 12 forward gears and 3 reverse gears.
The six-cylinder, liquid-cooled, turbocharged diesel engine in the Case International 9210 tractor was made by the Consolidated Diesel Company (CDC).
It had a displacement of 8.3 L (504.5 cu-in), a cylinder bore of 114.0 mm (4.5 in), and a piston stroke of 135.0 mm (5.3 in). 16.5:1 is the rating for the compression ratio.
The engine put out 200.0 HP (149 kW) and 847.5 Nm (625 lb-ft) of torque at 1,500 rpm.
CaseIH 9210 Price
CaseIH 9210 Original price: $92,000 (1995)
CaseIH 9210 Horsepower
CaseIH 9210 Horsepower: 200 hp 149.1 kW
CaseIH 9210 Oil Capacity
CaseIH 9210 Oil Capacity: 72 gal
CaseIH 9210 Years Made
CaseIH 9210 Years Made: 1990 to 1995
CaseIH 9210 Weight
CaseIH 9210 Weight: 17,000 lbs 7711 kg
CaseIH 9210 Serial Number
Location: | Under the left-side steps on the front fender |
1990: | JCB0004600 |
1991: | JCB0026501 |
1992: | JCB0028400 |
1993: | JCB0030500 |
1994: | JEE0031773 |
1995: | JEE0032808 |
CaseIH 9210 Specifications
General Specifications |
|
Model | Case IH 9210 |
Length | 6,130 mm (241.6 in.) |
Width | 3,030 mm (119.5 in.) |
Height | 3,290 mm (129.6 in.) |
Wheelbase | 3,050 mm (120.4 in.) |
Weight | 7,710 kg (17,000 lb.) |
Fuel tank capacity | 435 L (115 US. gal.) |
Battery | 12V |
Tires size |
|
Front tires | 18.4-38 |
Rear tires | 18.4-38 |
Engine |
|
Engine model | CDC (Consolidated Diesel Company) |
Fuel | Diesel |
Displacement | 8.3 L (504.5 Cu.in.) |
Bore x stroke | 114.0 x 135.0 mm (4.5 x 5.3 in) |
Power output | 200.0 HP (149 kW) |
Torque | 847.5 Nm (625 lb-ft) at 1,500 rpm |
Starter type | Electric starter |
Oil type | – |
Oil Capacity | 20.8 L (22 Qts.) |
Coolant capacity | 33.2 L (35 Qts.) |
Transmission and chassis |
|
Chassis | 4×4 (4WD) |
Steering | Hydrostatic with articulation and front-axle steering |
Transmission type | Full power shift transmission |
Gears | 12 forward and 3 reverse gears |
Ground speed | Forward: 3.5-29.4 km/h (2.2-18.2 mph) Reverse: 4.5-14.5 km/h (2.8-9.0 mph) |
PTO (Power take-off shaft) |
|
PTO Type: | Rear, independent type (option) |
PTO Speed: | 1,000 rpm |
Hydraulic lift |
|
3-point linkage: | Category III |
Pump capacity: | – |
Control system: | option |
No. of remote valves: | – |
Max lifting capacity (at link end): | 5,783 kg (12,750 lb.) |
Hydraulic system |
|
Type: | Closed center, load sensing, pressure compensating |
Hydraulic fluid capacity: | 68.0 L (18 gals.) |
Pressure | 172 bar (2,500 psi) |
CaseIH 9210 Review Video
- Not Available
Conclusion
That’s everything you need to know about the CaseIH 9210 price, specs, review, attachments, and features of the CaseIH 9210.
But if you have questions about this post, please leave a comment in the box below. I’ll do my best to help you as soon as I can. Thanks.
- For more information visit our website: Commercialvehicleinfo.com

I am Dipak Salvi. I’ve been a blogger since 2010, and I love to write. I really like to write about cars, technology, and money. I also write about fitness and health. I run a lot of blogs, such as https://commercialvehicleinfo.com. You can contact me at [email protected]