CaseIH C50 Specs, Price, Serial Numbers, Reviews, Horsepower, Engine Oil Capacity, Attachments

I have included all the information about the CaseIH C50 on this page, including the CaseIH C50 specifications, Weight, Price, and Dimension.

We aim to give our readers factual information, thus we only use official sources when researching the CaseIH C50.

This article, which has been updated, has all the information you need to know about the CaseIH C50.

About CaseIH C50

The CaseIH C50 is a CX Utility series 2WD or 4WD utility tractor. From 1998 to 2002, this tractor was made at the CaseIH factory in Doncaster, England.

The CaseIH C50 has a 2.7 L (165.0 cu in) diesel engine with three cylinders and three different kinds of transmissions.

The Perkins 903.27 engine was in the Case IH C50 utility tractor. It is a 2.7 L, 2,704 cm2, 165.0 Cuin, three-cylinder diesel engine with natural aspiration.

Each cylinder has a bore of 95.0 mm (3.74 in) and a stroke of 127.0 mm (5 in). The ratio of compression is 17.25:1. This engine made 53.7 PS (39.5 kW or 53.0 HP) of power at 2,250 rpm and 189.8 Nm (19.4 Kgm or 139.9 ft-lb) of torque at 1,200 rpm.

The CaseIH C50 has hydrostatic steering, differential hydrodynamic wet disc brakes, a Two-post ROPS with straddle platform, and a 75.7-liter (20 US gal; 16.7 Imp. gal) fuel tank.

CaseIH C50 Price

CaseIH C50 Specs

CaseIH C50 Original price: $19,700 (1999)

CaseIH C50 Horsepower

CaseIH C50 Horsepower: 53 hp 39.5 kW

CaseIH C50 Engine Oil Capacity

CaseIH C50 Engine Oil Capacity: 8 Qts 7.6 L

CaseIH C50 Years Made

CaseIH C50 Years Made: 1998 – 2002

CaseIH C50 Weight

CaseIH C50 Weight: 5357 To 7595 Pounds

CaseIH C50 Serial Number

Location: Near the tractor steering column on the right side.
1998: JJE1000056
1999: JJE1008492
2000: JJE1013490
2001: JJE1017672
2002: JJE1019985

CaseIH C50 Specifications

Make CaseIH
Model C50
Company Country United States
Production years From 1998  Until 2002
Tractor type Utility tractor
Fuel diesel
Price 19,700  USD
Total build

Engine size 165 ci or 2.7 L
Number of cylinders 3 cylinders
Horsepower 48 hp or 35.8 kW
Power RPM 2250 (rpm)
Engine torque 140 lb-ft or 189.8 Nm
Engine torque RPM 1200 (rpm)
Fuel type diesel
Fuel injection system mechanical direct injection
Fuel tank capacity 20 gal or 75.7 L
Compression ratio 17.25:1
Bore stroke 3.74×5.00 inches or (95 x 127 mm)
Oil tank capacity 8 qts or 7.6 L
Oil change frequency 250 h
Coolant tank capacity 12.57 qts or 11.9 L

Transmission type creeper
Transmission gears 16 forward and 8 reverse
Clutch system 12-inch dry disc
Oil tank capacity 36 qts or 34.1 L

Hydraulic system open center
Number of valves 0 to 3
Pump flow rate 12.7 GPM or 48.1 lpm
Hydraulic tank capacity 9 gal or 34.1 L
Hydraulic pressure 2500 psi or 172.4 bar
Hydraulic max flow 15.7 GPM or 59.4 lpm

PTO claimed power 40 hp or 29.8 kW
PTO real power 40.9 hp or 30.5 kW
PTO clutch system hydraulic wet disc
Rear PTO system independent
Rear PTO RPM 540 (rpm)
Front PTO system
PTO fuel consumption 2.6 gal/hour or 9.8 l/hour

AG front tires 7.50-16
AG rear tires 14.9-28
Weight 5,357 lbs or 2429 kg
Wheelbase 80.9 inches [205 cm] (2WD)
Ground clearance

Number of batteries 1
Battery voltage 12 V
Battery cold cranking Amps 650
Electric ground force negative
Electric charging system alternator
Electric charging Amps 65 amps
Engine starter volts 12 V

Wheel drive 4×2 2WD
Steering system hydrostatic power
Braking system differential hydraulic wet disc
Cabin type Two-post ROPS with straddle platform
Differential lock mechanical

Drawbar real power 35.4 hp or 26.4 kW
Drawbar fuel consumption 2.8 gal/hour or 10.6 l/hour
Max drawbar pull 7,990 lbs or 3624 kg

Hitch control system mechanical
Rear hitch II/I
Rear hitch lift 3,665 lbs or 1662 kg

CaseIH C50 Review Video

  • Not Available

CaseIH C50 Attachments

CaseIH 2200 Loader

Height (to pin): 108 inches
274 cm
Clearance, dumped bucket: 83 inches
210 cm
Dump reach: 35 inches
88 cm
Dump angle: 46°
Rollback angle: 10°
Breakout force (lift): 2,550 lbs
1156 kg
Lift to full height (at pin): 1,700 lbs
771 kg

CaseIH 2250 Loader

Height (to pin): 123 inches
312 cm
Clearance, dumped bucket: 99 inches
251 cm
Dump reach: 37 inches
93 cm
Dump angle: 41°
Rollback angle: 21°
Breakout force (lift): 3,500 lbs
1587 kg
Lift to full height (at pin): 2,500 lbs
1134 kg


That’s everything you need to know about the CaseIH C50 price, specs, review, attachments, and features of the CaseIH C50.

But if you have questions about this post, please leave a comment in the box below. I’ll do my best to help you as soon as I can. Thanks.

Similar Posts