CAT 301.7D CR Price, Specs, Review, Attachments, Battery, Features, Images
CAT 301.7D CR Price: If you’re Looking for a Little Excavator That can Make your Workdays Easier And more Fruitful, Look no further Than the Cat 301.7D CR.
This article will discuss the CAT CAT 301.7D CR Mini Excavator’s Specifications And Price. Video, photos, And Reviews Are included as Well.
My Expectation is That it will Be of use to My Companions. Right, Let’s Get Down to Business.
Also, Read Here
CAT 301.7D CR Mini Excavator Key Features
- Compact design: The 301.7D CR’s small size enables it to fit in small locations and move about the working site with ease.
- Zero tail swing: Since the machine’s zero tail swing design, it is simple to operate in limited places because the upper structure of the machine does not extend beyond the width of the rails when the machine is turned.
- Strong digging force: The 301.7D CR can tackle challenging digging activities because of its high digging force and bucket breakout force of over 9 kN (2,000 lbf).
- Advanced hydraulics: The equipment has hydraulic systems that are state-of-the-art, allowing the boom, bucket, and other attachments to be controlled smoothly and precisely.
- Longevity: To assure durability and dependability on the job site, the 301.7D CR was developed using premium materials and parts.
- Simple maintenance: To make maintenance activities quick and simple, the machine incorporates accessible service locations and a practical central lubrication system.
CAT 301.7D CR Price
CAT 301.7D CR Price: $33,764 USD
CAT 301.7D CR Specs
| ENGINE | |
| Engine Model | Yanmar 3TNV76 |
| Net Power | 17.7 hp |
| Displacement | 40.0 in3 |
| Gross Power (ISO 14396) | 24.3 hp |
| Rated Net Power @ 2,200 rpm (ISO 9249) | 17.7 hp |
| WEIGHTS | |
| Operating Weight | 3726.0 lb |
| Operating Weight with Cab | 3726.0 lb |
| Transport Weight with Canopy | 3550.0 lb |
| TRAVEL SYSTEM | |
| Gradeability | 30°/58% |
| Travel Speed | 2.8 km/h-5.6 km/h (1.74 mph-3.48 mph) |
| HYDRAULIC SYSTEM | |
| Operating Pressure – Equipment | 3481.0 psi |
| Operating Pressure – Travel | 3481.0 psi |
| Operating Pressure – Swing | 2610.0 psi |
| Auxiliary Circuits: Primary and Secondary Auxiliary Circuits – Maximum Flow | 9.0 gal/min |
| Auxiliary Circuits: Primary and Secondary Auxiliary Circuits – Maximum Pressure | 3335.0 psi |
| Maximum Bucket Force | 3190.0 lb |
| Maximum Stick Force – Long Stick | 1640.0 lb |
| Maximum Stick Force – Standard Stick | 1890.0 lb |
| Pump Flow @ 2,200 rpm | 10.5 gal/min |
| BLADE | |
| Height | 9.0 in |
| Dig Depth | 15.0 in |
| Lift Height | 11.0 in |
| Width | 990 mm/1300 mm (3 ft 3 in/4 ft 3 in) |
| SERVICE REFILL CAPACITIES | |
| Fuel Tank Capacity | 5.0 gal |
| Hydraulic Tank Capacity | 5.3 gal |
| DIMENSIONS (APPROXIMATE) – STANDARD STICK | |
| Boom Swing Angle (LH) | 65° |
| Boom Swing Angle (RH) | 57° |
| Height | 7.75 ft |
| Length of Undercarriage (Extending) | 5.27 ft |
| Maximum Boom Offset (LH) | 1.37 ft |
| Maximum Boom Offset (RH) | 1.75 ft |
| Maximum Dig Height | 11.27 ft |
| Maximum Digging Depth | 7.61 ft |
| Maximum Dozer Dig Depth | 1.28 ft |
| Maximum Dozer Lift Height | 11.0 in |
| Maximum Dump Height | 8.0 ft |
| Maximum Reach at Ground Level | 12.6 ft |
| Maximum Vertical Dig Depth | 5.18 ft |
| Tail Swing Radius | 660 mm/722 mm (2’1″/2’4″) |
| Transport Length (Arm Lowered) | 11.76 ft |
| Undercarriage Width (Extended) | 4.27 ft |
| Undercarriage Width (Retracted) | 3.25 ft |
| Width | 2.4 ft |
| DIMENSIONS (APPROXIMATE) – LONG STICK | |
| Boom Swing Angle (LH) | 65° |
| Boom Swing Angle (RH) | 57° |
| Height | 7.75 ft |
| Length of Undercarriage (Extending) | 5.27 ft |
| Maximum Boom Offset (LH) | 1.37 ft |
| Maximum Boom Offset (RH) | 1.75 ft |
| Maximum Dig Height | 11.64 ft |
| Maximum Digging Depth | 8.14 ft |
| Maximum Dozer Dig Depth | 1.28 ft |
| Maximum Dozer Lift Height | 11.0 in |
| Maximum Dump Height | 8.38 ft |
| Maximum Reach at Ground Level | 13.11 ft |
| Maximum Vertical Dig Depth | 5.64 ft |
| Tail Swing Radius | 660 mm/722 mm (2’1″/2’4″) |
| Transport Length (Arm Lowered) | 11.76 ft |
| Undercarriage Width (Extended) | 4.27 ft |
| Undercarriage Width (Retracted) | 3.25 ft |
| Width | 2.4 ft |
| OPERATING SPECIFICATIONS | |
| Counterweight | 110.0 lb |
| Stick Length – Long | 43.2 in |
| Stick Length – Standard | 37.1 in |
CAT 301.7D CR STANDARD EQUIPMENT
The CAT 301.7D CR micro excavator may come with the following components as standard:
- Drivetrain: CAT C1.5B
- Closed centre load detection in the hydraulic system (CLSS)
- A boom is a solitary unit.
- General-use bucket
- Cabin: climate-controlled,
- enclosed vehicle cabin
- Instrumentation: a pilot-operated joystick
- Steel railroad rails
- lamps: task lights
- Horn
- A travel safety alarm
Standard features may change depending on vehicle make/model/options. If you want to know what comes standard on a machine, you should contact the maker or a local dealer.
CAT 301.7D CR OPTIONAL EQUIPMENT
Optional CAT 301.7D CR small excavator equipment may include:
- Buckets: The 301.7D CR may be equipped with a Range of Buckets, including trenching, ditching, and grading Buckets.
- Thumb: A Hydraulic Thumb Attachment may be added to The machine to improve material Handling.
- Augers: Auger attachments may be added to The machine to Enable ground drilling.
- Hammers: Hydraulic Hammer Attachments for the equipment may be used to break up concrete, asphalt, and other hard materials.
- Ripper attachments: Ripper attachments may be added to the machine to break up and remove soil and rock.
- Shear attachments: Shear attachments may be added to the machine to enable metal cutting and recycling.
- Grapples: Grapple attachments for the machine can be added to enable material handling and sorting.
- Snow blower: A snow blower attachment for the machine may be installed to clear snow off sidewalks, driveways, and other locations.
Final Word
All information is Authentic And true, According to my Investigation. However, if you Have any Queries, please Express Them in The comments section below. We appreciate Your stopping by. Please Return soon.
FAQs For CAT 301.7D CR
What does CR mean in a Cat excavator?
CR means Compact Radius in Cat excavator.
How much does a cat 301.7 weigh?
Cat 301.7 Operating Weight is 4222 lb 1915 kg, with a minimum operating weight of 3946 lb 1790 kg and a maximum operating weight of 4222 lb 1915 kg.
I am Dipak Salvi. I’ve been a blogger since 2010, and I love to write. I really like to write about cars, technology, and money. I also write about fitness and health. I run a lot of blogs, such as https://commercialvehicleinfo.com. You can contact me at [email protected]