David Brown 1690 Specs, Price, Weight & Review ❤️

David Brown 1690 Specs, Weight, Price, Review, Horsepower, Fuel tank capacitySerial Numbers

Here in this post, I have gathered information about the David Brown 1690 from its official website, including its specifications, weight, price, and dimensions.

We believe in providing reliable information to our readers, therefore we prefer to obtain information on the David Brown 1690 from authentic sources.

This article, which has been updated, has all the information you require about the David Brown 1690.

David Brown 1690 Overview

The David Brown 1690 utility tractor is either a 2WD or 4-wheel drive. It was manufactured by David Brown (a division of J.I. From 1980 to 1984, Case was located in Meltham Mills (Huddersfield), England. The David Brown 1690 has a 5.4L (329.0 cu*in), six-cylinder diesel engine.

J.I. engine was used in the DB 1690 utility tractor. Case engine. It is a 5.4L, 5391 cm 2, (329.0 cu*in), six-cylinder natural, aspirated diesel engine. The cylinder bore measures 100.0 mm (3.94 inches) and the stroke measures 114.0 mm (4.49 inches).

The compression ratio rating of this engine is 16.0 to 1. This engine produced 91.3 PS (67.8 kW; 90.0 HP) at 2200 rpm.

David Brown 1690 Price New

David Brown 1690

David Brown 1690 Price: $30,000 (1983 )

David Brown 1690 Weight

David Brown 1690 Weight (operating): 4WD ROPS: 3,970 kg (8,752 lbs)

David Brown 1690 Horsepower:

David Brown 1690 Horsepower: 90.0 HP

David Brown 1690 Fuel tank capacity

David Brown 1690 Fuel tank capacity: 98.4 liters

David Brown 1690 Serial Numbers Information

Year  Serial Numbers
1980 11120101
1981 112118411
1982 11213684
1983 11214373

David Brown 1690 Specifications

Engine

Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Fuel type Diesel
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Horsepower 91.3 PS (67.1 kW; 90.0 HP) at 2,200 rpm
Coolant capacity: 15.0 L (15.9 US. qt, 13.2 Imp. qt.)
Displacement 5.4 L, 5,391 cm2, (329.0 cu·in)
Compression ratio 16.0:1
Starter Electric

General Specifications

Model David Brown 1690
Width
Wheel base 2,550 mm (100.4 in)
Fuel tank capacity 98.4 liters (26 US gal.; 21.6 Imp. gal)
Cabin type Two-post ROPS or Cab (optional)
Length
Height
Weight (operating) 4WD ROPS: 3,970 kg (8,752 lbs)
Battery 12V

Transmission and chassis

Chassis 4×2 2WD or 4×4 MFWD 4WD
Brakes Hydraulic wet disc
Transmission type Synchromesh with hydraulic dry disc clutch
Speed Forward: 24.3 kmh (15.1 mph) Reverse: 14.3 (8.9 mph
Transmission type Partial power shift with hydraulic dry disc clutch
Steering type Power
Transmission model
Gears 12 forward and 4 reverse
Transmission model
Gears 12 forward and 4 reverse

Hydraulic system

Pump flow 20.0 gpm (75.7 lpm)
Hydraulic type Open center

Tires

Rear tires Ag: 18.4-34
Front tires Ag: 10.00-16

Three-Point Hitch

Control type
Lift capacity (at ends)
Category II

PTO (Power take-off shaft)

Rear PTO speed 540/1000 rpm
Rear PTO type Independent

David Brown 1690 Review

Conclusion

After research, I have provided information about David Brown 1690 Specs, Weight, Price & Review in this post. So I hope you liked this article. If you liked then share this article with your friends, family, and relatives.

And if you still feel that I have left out something in this post then you can tell me in the comment box below.

FAQs – David Brown 1690

david brown 1690

Q.1 What horsepower is a 1690 David Brown?

David Brown 1690 horsepower 90.0 HP

Q.2 How much is David brown 1690 Fuel tank capacity?

David Brown 1690 Fuel tank capacity 98.4 liters

This article I have created this to give you complete information about the David Brown  1690, Price with its Review.

Check out the given details which help you to know about the David Brown 1690 Specs, and Price with its Review.

For more information visit our website: Commercialvehicleinfo.com