Farmall 756 Specs, Weight, Price, Overview, Horsepower, Review & Fuel Tank Capacity
Here in this post, I have taken all the details about Farmall 756 from the ( Official Site ) including Farmall 756 specs, Weight, Price & Dimension.
we believe to provide accurate details to our readers and we prefer only official sources for information about Farmall 756.
All the details which you want to know about Farmall 756 you can find in this article which is updated.
Farmall 756 Overview
The Farmall 756 is a 2WD or 4WD row-crop tractor produced by Farmall (a division of International Harvester) between 1967 and 1971.
The Farmall 756 is powered by one of two engines: a 5.1 L (310.0 cuin) six-cylinder diesel engine or a 4.8 L (291.0 cuin) six-cylinder gasoline/LP-gas engine,
as well as one of two transmissions: a gear-type transmission with eight forward and four reverse gears and a dry disc clutch, or a torque amplifier transmission with sixteen forward and eight reverse gears.
The tractor could be equipped with the following engines:
International Harvester D310. It is a 5.1 L, 5,080 cm2, (310.0 cuin) six-cylinder natural aspirated diesel engine with a cylinder bore of 98.0 mm (3.86 in) and a piston stroke of 111.0 mm (4.37 in). The compression ratio is rated 16.0:1.
International Harvester C-291. It has a 4.8 L, 4,768 cm2 (291.0 cuin) naturally aspirated gasoline/LP-gas engine.
The piston stroke is 112.0 mm and the cylinder bore is 95.0 mm (3.74 in) (4.41 in). The compression factor is 7.6:1.
The Farmall 756 has hydrostatic power steering, independent hydraulic disc brakes, an open operator station or cab (optional),
and a fuel tank that holds 125.0 litres (33 US gal.; 27.5 Imp. gal) of gasoline or diesel fuel and 147.6 litres (39.0 US gal, 32.5 Imp. gal) of LP-gas.
Farmall 756 New Price
Price: N/A
Farmall 756 Weight
Operating Weight: 8,350 lbs 3787 kg
Farmall 756 Horsepower
Engine Horsepower: 76.5 hp 57.0 kW
Farmall 756 Fuel Tank Capacity
Fuel Tank Capacity: 125.0 liters
Farmall 756 Serial Number
| Year | Serial Number |
| 1967 (Farmall) | 7501 |
| 1968 (Farmall) | 9904 |
| 1969 (Farmall) | 14125 |
| 1970 (Farmall) | 17832 |
| 1971 (Farmall) | 18374 |
| 1967 (IH) | 7501 |
| 1968 (IH) | 7672 |
| 1969 (IH) | 8164 |
| 1970 (IH) | 8284 |
| 1971 (IH) | 8427 |
Farmall 756 Specifications
Engine
| Engine model | International Harvester D310 |
| Starter | Electric |
| Displacement | 5.1 L, 5,080 cm2, (310.0 cu·in) |
| Bore and stroke | 98.0 mm X 111.0 mm (3.86 in X 4.37 in) |
| Cylinders | 6 |
| Fuel type | Diesel |
| Compression ratio | 16.0:1 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Coolant capacity: | 22.2 L (23.5 US. qt, 19.5 Imp. qt.) |
| Oil capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
General Specifications
| Model | Farmall 756 |
| Length | 4,160 mm (163.8 in) |
| Width | 2,330 mm (91.7 in) |
| Height (steering wheel) | 2,080 mm (81.9 in) |
| Wheelbase | 2,660 mm (104.7 in) |
| Weight (shipping) | 3,790 kg (8,356 lbs) |
| Fuel tank capacity | Gasoline/diesel: 125.0 liters (33 US gal.; 27.5 Imp. gal) LP-gas: 147.6 liters (39.0 US gal, 32.5 Imp. gal) |
| Battery | Diesel: Two 6V, 130Ah; Gas/LP-gas: One 12V, 60Ah |
| Cabin type | Open operator station or Cab (optional) |
Engine
| Engine model | International Harvester C-291 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Gasoline/LP-gas |
| Displacement | 4.8 L, 4,768 cm2, (291.0 cu·in) |
| Bore and stroke | 95.0 mm X 112.0 mm (3.74 in X 4.41 in) |
| Compression ratio | 7.6:1 |
| Horsepower | – |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 19.4 L (20.5 US. qt, 17.1 Imp. qt.) |
PTO (Power take-off shaft)
| Rear PTO speed | 1000, 540/1000 rpm |
| Rear PTO type | Independent |
Transmission and chassis
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) |
| Steering type | Hydrostatic power |
| Brakes | Independent hydraulic disc |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 29.8 kmh (18.5 mph) Reverse: 14.5 kmh (9 mph) |
| Transmission oil capacity | 64.4 L (17 US. gal, 14.2 Imp. gal.) |
| Transmission model | – |
| Transmission type | Torque amplifier |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 29.8 kmh (18.5 mph) Reverse: 14.5 kmh (9 mph) |
| Transmission oil capacity | 64.4 L (17 US. gal, 14.2 Imp. gal.) |
Tires
| Rear tires | Ag: 15.5-38 |
| Front tires | Ag: 6.50-16 |
Farmall 756 Review
The Farmall 756, a well-liked utility tractor made by International Harvester from 1965 to 1976, was driven by a 6.8-liter DT-466 diesel engine, boasting a power output of 165 horsepower.
The 756 was offered with a range of transmission options, including a 6-speed manual, a 12-speed power shift, and a Hydro 88 hydrostatic transmission, providing flexibility to suit different needs.
Full review YouTube video check here.
Conclusion
After research, I have provided information about Farmall 756 Specs, Weight, Price & Review in this post.
So I hope you liked this article. If you liked then share this article with your friends, family, and relatives.
And if you still feel that I have left out something in this post then you can tell me in the comment box below.
FAQs – Farmall 756
Q.1 How much horsepower does a 756 International have?
Ans. 69 hp 51.5 kW
Q.2 What engine is in International 756?
Ans. The 756 was manufactured until 1971 and was offered with either a 310-cu.in. inline six-cylinder diesel developed by International Harvester’s Neuss Works in Germany (thus the nickname “German diesel”); or a 291-cu.in. inline-six powered by either gasoline or LPG.
This article I have created this to give you complete information about the Farmall 756 Specs, Price with its Review.
Check out the given details which help you to know about the Farmall 756 Specs, Price with its Review.
For more information visit our website: Commercialvehicleinfo.com
