International Harvester 284 Specs, Weight, Price, Overview, Horsepower, &Fuel Tank Capacity
International Harvester 284 Specs :I have gathered all the information on the International Harvester 284 that is available on the (official site) and included it on this page.
This information includes the International Harvester 284 Specs, weight, price, and dimension. When looking for information regarding International Harvester 284, we only trust official sources since we want to give our readers the most accurate information possible.
This article, which has been updated, has all of the information that you could ever want to learn about the International Harvester 284.
International Harvester 284 Overview
From 1976 to 1984, the International Harvester 284 was a 2WD or 4WD compact utility tractor produced by Komatsu in Japan for the distribution company International Harvester.
International Harvester 284 comes with two engines that are a 1.2 Liter 4 gasoline engine or one that is a 1.6 L (99.0 cuin’) four-cylinder diesel engine and sliding gear transmission, which has eight reverse and two forward gears, as well as Dry disc clutch.
International Harvester 284 New Price
International Harvester 284 Price:$5,000 (1984 ) USD
International Harvester 284 Weight
International Harvester 284 Operating Weight
Gas Shipping | 2050 lbs 929 kg |
Diesel Shipping | 2270 lbs 1029 kg |
4WD Shipping | 2,657 lbs 1205 kg |
Gas Operating | 2430 lbs 1102 kg |
Diesel Operating | 2740 lbs 1242 kg |
Ballasted | 3600 lbs 1632 kg |
International Harvester 284 Horsepower
International Harvester 284 Engine Horsepower: 28 hp
International Harvester 284 Fuel Tank Capacity
International Harvester 284 Fuel Tank Capacity: 8.7 US gal. (33.0 liters)
International Harvester 284 Serial Number
Year |
Serial |
Engin Type |
1976 | 8005 | Gasoline |
1977 | 8125 | Gasoline |
1978 | 10705 | Gasoline |
1979 | 12425 | Gasoline |
1980 | 13207 | Gasoline |
1981 | 13419 | Gasoline |
1980 | 670 | 2WD Diesel |
1981 | 2146 | 2WD Diesel |
1982 | 2999 | 2WD Diesel |
1983 | 3343 | 2WD Diesel |
1984 | 4561 | 2WD Diesel |
1980 | 1211 | 4WD Diesel |
1981 | 2267 | 4WD Diesel |
1983 | 3803 | 4WD Diesel |
1984 | 4511 | 4WD Diesel |
International Harvester 284 Specifications
General Specifications |
|
Model | International Harvester 284 |
Weight | 1,100 kg (2,425 lbs) |
Height | 1,830 mm (72 in) |
Battery | 12V |
Fuel tank capacity | 33.0 litres (8.7 US gal.; 7.3 Imp. gal) |
Cabin type | Open operator station or two-post ROPS with canopy (optional) |
Width | 1,400 mm (55.1 in) |
Wheel base | 1,740 mm (68.5 in) |
Length | – |
Ground clearance | 350 mm (13.8 in) |
Engine |
|
Engine model | Mazda M4-71G |
Torque | 78.6 N·m (8 kg·m, 57.9 ft·lb) at 2,200 rpm |
Oil capacity: | 3.0 L (3.2 US. qt, 2.6 Imp. qt.) |
Coolant capacity: | 4.9 L (5.2 US. qt, 4.3 Imp. qt.) |
Engine type | Four-stroke, liquid-cooled, inline |
Displacement | 1.2 L, 1,168 cm2, (71.3 cu·in) |
Cylinders | 4 |
Fuel type | Gasoline |
Bore and stroke | 70.0 mm X 76.0 mm (2.76 in X 2.99 in) |
Starter | Electric |
Horsepower | 28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm |
Compression ratio | 8.6:1 |
Engine |
|
Engine model | Nissan |
Coolant capacity: | 6.8 L (7.2 US. qt, 6 Imp. qt.) |
Starter | Electric |
Torque | 78.6 N·m (8 kg·m, 57.9 ft·lb) at 1,600 rpm |
Bore and stroke | 83.0 mm X 100.0 mm (3.27 in X 3.94 in) |
Fuel type | Diesel |
Engine type | Four-stroke, liquid-cooled, inline |
Oil capacity: | 4.9 L (5.2 US. qt, 4.3 Imp. qt.) |
Horsepower | 30.5 PS (22.4 kW; 30.0 HP) at 2,600 rpm |
Displacement | 1.6 L, 1,622 cm2, (99.0 cu·in) |
Cylinders | 4 |
Transmission and chassis |
|
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Transmission oil capacity | 12.9 L (3.4 US. gal, 2.8 Imp. gal.) |
Gears | 8 forward and 2 reverse |
Speed | Forward: 14.9 kmh (9.3 mph) Reverse: 10.0 (6.2 mph) |
Transmission model | – |
Steering type | Manual |
Transmission type | Sliding gear with dry disc clutch |
Brakes | Hydraulic wet disc |
Tires |
|
Rear Tires | Ag:11.2-24 |
Front tires | Ag: 5.00-15 (2WD), 7.00-16 (4WD) |
Three-Point Hitch |
|
Lift capacity (at ends) | 910 kg (2,010 lbs) |
Control type | Position control |
Category | I |
PTO (Power take-off shaft) |
|
Rear PTO speed | 540/1,000 rpm |
Rear PTO type | Transmission |
Hydraulic system |
|
Pressure | 1920 psi (132.4 bar) |
Total flow | 6.0 gpm (22.7 lpm) |
Hydraulic type | – |
International Harvester 284 Review
The International Harvester 284 was a sub-compact utility tractor that was produced from 1978 to 1980. It was powered by either a Mazda 1.2L gasoline engine or a Nissan 1.6L diesel engine.
Both engines produced around 30 horsepower. The 284 had a 9-speed manual transmission and a 681-pound lift capacity at the 3-point hitch.
Full review YouTube video check here.
Conclusion
That was all about the International Harvester 284 Price, Specs, Review, and Key Features, But if you have any queries regarding this post, then please Comment below in the comment Box, We will Solve your Problem as soon as possible. Thanks for Visiting our Site.
FAQs – International Harvester 284
What is the International Harvester 284?
It was designed for a variety of agricultural and light industrial tasks.
What horsepower is an international 284?
How Many international 284 Fuel tank capacities?
What is the maximum speed of the International Harvester 284?
What is the maximum speed of the International Harvester 284?
It also features a synchronized transmission for smooth shifting.
What is the fuel capacity of the International Harvester 284?
This provides enough fuel for several hours of operation, depending on the workload.
What is the price of an International Harvester 284?
However, you can typically expect To pay between $5,000 and $8,000 for a Well-maintained tractor.
What implements can be used with the International Harvester 284?
The tractor’s hydraulic system can power most implements, and the three-point hitch allows for easy attachment and detachment.
What is the fuel consumption of the International Harvester 284?
However, it typically uses between 1.5 and 2.5 gallons of fuel per hour Of operation.
What is the turning radius of the International Harvester 284?
However, it typically has a turning radius of approximately 8 feet.
This article I have created this to give you complete information about the International Harvester 284 Specs, Price with its Review.
Check out the given details which help you to know about the International Harvester 284 Specs, Price with its Review.
For more information visit our website: Commercialvehicleinfo.com