John Deere 4066m Specs, Weight, Horsepower, Price & Review
If you’re looking for John Deere 4066m price, specs, reviews, weight, and features, you’ve come to the right place. Our team has confirmed this information with several John Deere representatives and associates.
Let’s discuss John Deere 4066m price, specifications, and reviews.
Finding complete information on the internet can be challenging. Therefore, we prefer that you save your precious energy and time.
Our team has compiled complete and step-by-step information on John Deere 4066m price, specs, reviews, weight, and features to make your search easier.
About John Deere 4066m
The 4M series of John Deere compact utility tractors includes the 4066M. Since 2014, this tractor has been made by John Deere in Augusta, Georgia, in the United States.
The John Deere 4066M comes with either a power shuttle transmission with a wet disc clutch and 12 forward and 12 reverse gears or a hydrostatic transmission with an infinite number of forward and reverse gears.
The Yanmar 4TNV86CHT engine was in the John Deere 4066M small utility tractor. It has a 2.1 L, 2089 cm2, 127.5 cuin, four-cylinder turbocharged diesel engine with a cylinder bore of 3.39 inches and a piston stroke of 3.54 inches. At 2,600 rpm, the most power this engine could make was 66.8 PS (49.1 kW; 65.8 HP).
The John Deere 4066M has power steering, hydraulic wet disc brakes, a two-post folding ROPS, and a fuel tank that holds 49.2 liters (13 US gal; 10.8 Imp. gal).
John Deere 4066m Price
John Deere 4066m price is $44,415.00USD, PLUS ADDITIONAL CHARGES
John Deere 4066m Weight
John Deere 4066m weight is 3770 lbs 1710 kg
John Deere 4066m Horsepower
John Deere 4066m engine produces a 65 hp
John Deere 4066m loader lift capacity
lift capacity 1135 kg (2500 lb)
John Deere 4066m Key Fact
- Turbocharged diesel engine
- PowrReverser™ or eHydrostatic Transmission options
- Standard 4-wheel-drive
- Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch
John Deere 4066m Features
- Styles that are attractive make it easier to see and use.
- The Yanmar diesel engine is very powerful and gives a lot of power when carrying heavy loads.
- The PowrReverserTM transmission lets you change directions without using the clutch.
- With an eHydroTM transmission, you can get the most work done.
- The operator station is cosy and easy to use.
John Deere 4066M Quick Specs
- Manufacturer: John Deere
- Engine Brand: Yanmar
- Engine Power: 66 hp
- Fuel Capacity: 13.8
- Transmission: eHydro
- Drive Wheels: MFWD
- Total Hydraulic Output: 15.9 gpm
John Deere 4066M Specs
Engine |
|
| Engine Brand | Yanmar |
| Engine Power | 66 hp |
| Displacement | 127.6 cu in |
| Cylinders | 4 |
| Cooling System | Liquid Cooled |
| Starting System | Electric Key Start |
| Air Filter | Heavy-Duty Canister |
| PTO Horse Power | 52 hp |
| Aspiration | Turbo Charged |
| Rated Engine Speed | 2600 rpm |
Dimension |
|
| Product Weight | 4675 lbs |
| Length, Overall | 128.2″ |
| Width, Overall | 89.1 |
| Height, Overall | 97.2″ |
| Front Tire Size | 8×16 R1 |
| Rear Tire Size | 13.6×28 R1 |
| Ground Clearance | 15.6″ |
| Wheelbase | 71.5″ |
Fuel System |
|
| Fuel Capacity | 13.8 |
| Fuel Type | Diesel |
| Fuel Delivery System | Direct Injection |
Drive |
|
| Transmission | eHydro |
| Drive Wheels | MFWD |
| Forward Speed | 0-20 |
| Reverse Speed | 0-20 |
| Differential Lock | Yes |
| Cruise Control | Yes |
| Transmission Options | eHydro |
| Ranges | 3 |
| Final Drive | Planetary |
Steering |
|
| Power Steering | Yes |
| Turning Radius | 9.19 ft |
| Tilt Steering | N/A |
Operator Station |
|
| Roll Over Protection (ROPS) | Foldable |
| Platform | Flat |
Attachment Compatibility |
|
| Front Blade | No |
| Front Snowblower | No |
| Mid Mount Mower | No |
| Backhoe | Yes |
| Front Loader | Yes |
Electrical |
|
| Volts | 12 V |
| Alternator | 75 amp |
Hydraulics |
|
| Hydraulic Type | Open Center |
| Total Hydraulic Output | 15.9 gpm |
| Steering Output | 5.7 gpm |
| Implement Output | 10.2 gpm |
| Max Operating Pressure | 2500 psi |
| Draft Control Type | Position Control |
| Remote Control Valves | Dual Mids Std, Optional 3 Rear |
3-Point Hitch |
|
| Hitch Category | Cat. I |
| Hitch Lift Capacity | 2500 lbs |
Power Take Off |
|
| Standard PTO | Rear 540 @ 2600 rpm |
| Optional PTO | 540E Economy PTO |
| PTO Control | Independent |
Brakes |
|
| Brake Type | Wet disk |
| Brake Pedal | Left Side, Split Brake |
John Deere 4066M Review
The John Deere 4066M is a robust compact utility tractor suitable for a range of tasks, including loading, mowing, tilling, and snow removal. It is equipped with a 66-horsepower diesel engine and features a hydrostatic transmission for smooth and straightforward operation.
For more details check out the YouTube video
official site: https://www.deere.com/
John Deere 4066m Attachments
John Deere D170 Loader |
|
| Height (to pin): | 112 inches 284 cm |
| Clearance, dumped bucket: | 90 inches 228 cm |
| Dump reach: | 28 inches 71 cm |
| Dump angle: | 42° |
| Clearance, level bucket: | 104 inches 264 cm |
| Reach at the ground: | 66 inches 167 cm |
| Breakout force (at pin): | 3853 lbs 1747 kg |
| Breakout force (at 500mm): | 2902 lbs 1316 kg |
| Breakout force (bucket): | 3487 lbs 1581 kg |
| Lift to full height (at pin): | 2391 lbs 1084 kg |
| Lift to full height (at 500mm): | 1760 lbs 798 kg |
| Lift to 1.5m (at pin): | 2875 lbs 1304 kg |
| Lift to 1.5m (at 500mm): | 2295 lbs 1041 kg |
| Bucket width: | 73 inches 185 cm |
John Deere H180 Loader |
|
| Loader weight: | 927 lbs 420 kg |
| Height (to pin): | 110 inches 279 cm |
| Clearance, dumped bucket: | 86 inches 218 cm |
| Dump reach: | 30 inches 76 cm |
| Dump angle: | 47° |
| Clearance, level bucket: | 102 inches 259 cm |
| Reach the ground: | 67 inches 170 cm |
| Breakout force (at pin): | 4027 lbs 1826 kg |
| Breakout force (at 500mm): | 3037 lbs 1377 kg |
| Breakout force (bucket): | 3427 lbs 1554 kg |
| Lift to full height (at pin): | 2539 lbs 1151 kg |
| Lift to full height (at 500mm): | 1885 lbs 855 kg |
| Lift to 1.5m (at pin): | 3023 lbs 1371 kg |
| Lift to 1.5m (at 500mm): | 2413 lbs 1094 kg |
| Bucket width: | 73 inches 185 cm |
John Deere H180 Loader |
|
| Loader weight: | 1100 lbs 498 kg |
| Height (to pin): | 110 inches 279 cm |
| Clearance, dumped bucket: | 86 inches 218 cm |
| Dump reach: | 30 inches 76 cm |
| Dump angle: | 47° |
| Clearance, level bucket: | 102 inches 259 cm |
| Reach the ground: | 67 inches 170 cm |
| Breakout force (at pin): | 3844 lbs 1743 kg |
| Breakout force (at 500mm): | 3346 lbs 1517 kg |
| Breakout force (bucket): | 4633 lbs 2101 kg |
| Lift to full height (at pin): | 2779 lbs 1260 kg |
| Lift to full height (at 500mm): | 2642 lbs 1198 kg |
| Lift to 1.5m (at pin): | 2213 lbs 1003 kg |
| Bucket width: | 73 inches 185 cm |
John Deere 400E Loader |
|
| Height (to pin): | 112 inches 284 cm |
| Clearance, dumped bucket: | 90 inches 228 cm |
| Dump reach: | 28 inches 71 cm |
| Dump angle: | 42° |
| Clearance, level bucket: | 104 inches 264 cm |
| Reach the ground: | 66 inches 167 cm |
| Breakout force (at pin): | 3853 lbs 1747 kg |
| Breakout force (at 500mm): | 2902 lbs 1316 kg |
| Breakout force (bucket): | 3487 lbs 1581 kg |
| Lift to full height (at pin): | 2391 lbs 1084 kg |
| Lift to full height (at 500mm): | 1760 lbs 798 kg |
| Lift to 1.5m (at pin): | 2875 lbs 1304 kg |
| Lift to 1.5m (at 500mm): | 2295 lbs 1041 kg |
| Bucket width: | 73 inches 185 cm |
John Deere 485A Backhoe |
|
| Backhoe type: | John Deere 485A Backhoe |
| Weight: | 1435 lbs 650 kg |
| Transport height: | 92 inches 233 cm |
| Bucket width: | 16 inches 40 cm |
| 2-Foot flat digging depth: | 102 inches 259 cm |
| Reach from pivot: | 140 inches 355 cm |
| Loading height: | 79 inches 200 cm |
| Bucket Rotation: | 180 |
| Swing Arc: | 170 |
| Bucket force: | 3752 lbs 1701 kg |
| Dipperstick force: | 2449 lbs 1110 kg |
John Deere 4066m Problems
John Deere 4066M Engine Troubleshooting
The engine starts hard or won’t start
Fuel filter element clogging. Clean it or get a new one. There’s air in the gas lines. Let air into the fuel lines. Fuel injection nozzles fault. Fuel injection pump damage. Fix or replace the fuel pump.
Engine stops unexpectedly during operation
The timing is off on the fuel injection pump. As needed, make changes to the pump. The fuel filter was plugged. Replace filter element. The coolant is at a low temperature. As needed, warm up the engine.
The engine starts but immediately stalls
The fuel filter element is dirty. The fuel injection pump isn’t doing its job right. Put in a new fuel pump or fix the old one. The air filter is dirty. Replace the air filter element.
Engine overheats
The radiator cap is broken or the radiator core is clogged. Wash the radiator or get a new cap. Lack of coolant in the engine. Fill the cooling system and look for leaks or other problems in the parts. Loose or damaged fan belt. The fan belt should be changed. Insufficient engine oil. Bring the oil up to the right level.
Engine loses power
injection nozzle that doesn’t work. Install a new set of nozzles that are well-balanced. Clogged fuel lines or hoses. Fuel lines and hoses need to be fixed. Plugged air filter. Change the air filter element. Damaged cylinder-head gasket. Install a new gasket.
Engine noises or knocks
The engine is icy. Bring to the right temperature. Low oil in the engine. Add oil to the crankcase of the engine. bad timing for injecting fuel. Check the timing of the fuel injection pump. Broken or worn-out pistons. Pistons replacement is required. Bad or out-of-place connecting rod. We need to replace or straighten the connecting rod.
Engine stalls when idle
Mistake in adjusting the low idle speed. Change as needed. The valve clearance isn’t right. Adjust the valve clearance to the instructions. The fuel injection pump isn’t working right. Change or fix the injection pump.
Oil pressure is low
Not enough oil. Fill the crankcase to the proper oil level. The oil pump is broken. Take off the oil pump and look at it. engine oil filter clogged. Engine oil filter element maintenance or replacement
John Deere 4066M Transmission Troubleshooting
Transmission is making noise
Bad backlash or gears that are worn out. Either fix the backlash or replace the gears. Gear shift forks that are worn or broken. Change the shift levers. Splines that are stuck or worn down.
Need to get a new shaft. Transmission fluid is insufficient. Checking the level of transmission fluid and adding more if needed. bearings that are worn or broken. Bad bearings need to be replaced. The transmission fluid is dirty. Switch the oil.
Difficult to shift gears
The linkage for shifting gears is rusty or worn. Change the shift linkage or grease it. The clutch is broken or not set up right. Adjustment or replacement of the clutch is needed.
Shift forks that are worn or bent. Shift forks should be replaced. The gearshift mechanism is broken. Find the broken parts and replace them.
Transmission fluid pressure is insufficient:
Transmission oil is insufficient. We need to add oil to the transmission. The filter for the transmission fluid is full (if fitted). Change or clean the filter for the transmission fluid. Stuck relief valve. Change the relief valve.
External fluid leaks
Seals or gaskets are broken. Gaskets and seals need to be changed. There’s a lot of oil in the transmission. Fix the amount of oil.
Hydrostatic Transmission Troubleshooting
Hydrostatic transmission makes noise
The speed control linkage is broken or not set up right. Adjust or change linkage. The transmission was full. There needs to be less load.
Low level of transmission oil or oil that isn’t clean. Add oil to the right level or pour in fresh oil. Relief valve failure. Switch out the valve. Some parts of the transmission are broken or worn out. Replace or fix parts that are broken.
Transmission oil overheating
Too much transmission. Cut the load on the transmission. The cooling parts are broken or clogged. Check all of the cooling parts and replace or fix them if needed.
Transmission oil is insufficient. Put oil in the transmission. The filter element for the transmission fluid is clogged. Service or change the filter for the transmission fluid.
Power is insufficient
Not enough oil. Put oil in the transmission. Relief valve failure. Switch out the valve. Speed control linkage that is worn or out of place. Adjust or change linkage.
External fluid leaks
The plug is in the oil return tube. Clean the tube or get a new one. Damaged seals or gaskets. Gaskets and seals need to be changed. The pressure inside the transmission case is too high. Replace parts that are worn.
John Deere 4066M Hydraulic System Troubleshooting
Hydraulics overheating:
Wrong hydraulic oil type. Fill the tank with the right kind of oil. Contaminated hydraulic fluid. Change hydraulic fluid. Air in hydraulic lines. Bleed hydraulic lines. Defective main relief valve. The relief valve should be changed.
Hydraulic fluid pressure too low:
There isn’t enough hydraulic oil. Oil is needed. Clogged hydraulic oil filter. Clean or replace the filter element in the hydraulic filter.
Hydraulic lines that are leaking. Find where the system is leaking and fix it. The block of the hydraulic spool valve is not set up right.
The spool valve needs to be set up right. Faulty hydraulic pump. Put in a new oil pump for hydraulics. The hydraulic cylinder not working. Install a new hydraulic cylinder or repair it.
3-point hitch cannot be raised or raising is too slowly
The hydraulic pump does not work. Change or repair the hydraulic oil pump. The main relief valve is broken. Replace the relief valve.
The block for the hydraulic spool valve is broken. Fix or replace the hydraulic valve. The hydraulic cylinder not working. Change or repair the hydraulic cylinder.
Hydraulic fluid level low. Fill up the fluid in the hydraulics. Filter element for hydraulic oil that is dirty. If you need to, replace the hydraulic filter element or have it serviced. Too much weight on the hitch. We need to lighten the load.
3-point hitch cannot be lowered or lowering is too slowly:
Damaged hydraulic cylinder. Replace the hydraulic cylinder or make repairs. Not a hydraulic spool valve adjustment. Need to adjust the spool valve.
The shaft of the lift arm is worn. Switch the shaft out. No changes have been made to the hitch. The hitch needs to be changed.
Hitch drop or lift is jerky:
The hydraulic oil is dirty. Get fresh hydraulic oil and fill it up. The hydraulic pump does not work. Replace or repair the hydraulic fluid pump. Air in hydraulic lines.
Bleed hydraulic lines. The hydraulic control valve is broken. Fix or change a hydraulic valve. The hydraulic cylinder is broken. Fix a broken hydraulic cylinder or put in a new one.
John Deere 4066M Steering System Troubleshooting
Excessive steering wheel free play:
Worn shaft or coupling on the steering column. Replace defective components. Worn steering pump. The pump for the steering needs to be fixed or replaced.
The assembly of the steering linkage is worn out or loose. Check and change as necessary. The control valve for the power steering is broken or worn out. Change or fix the steering valve as needed.
John Deere 4066M Electrical System Troubleshooting
The battery will not charge:
The connections between the wires are loose or rusty. Fix loose connections or clean them. The terminal connectors on the battery are broken.
Connectors at the terminals should be changed. The battery has a bad cell. The battery needs to be changed. The belt is damaged or loose. The belt needs to be fixed or changed.
Starter cranks slowly
No power in the battery. Get the battery charged up. The battery is going down fast. Battery terminals that have rusted or wires that have come loose.
Check the connections between the wires and replace or clean the terminals.
The starter motor is not working
The battery is low or broken. Charge the Battery or get a New one. Wires that aren’t connected or aren’t connected right.
Check the Wires and make sure they are Connected correctly. No power in the battery. Fill the battery up. The starter motor is broken. We need to change the starter.
Conclusion
That was all about the John Deere 4066M Tractor’s Price, Specs, Review, and Key Features, But if you have any queries regarding this post, then please Comment below in the comment Box, We will Solve your Problem as soon as possible. Thanks for Visiting our Site.
John Deere 4066m FAQ
How many horsepower is a John Deere 4066m?
John Deere 4066m engine produces a 65 hp
How much does a John Deere 4066m tractor weigh?
John Deere 4066m weight is 3770 lbs 1710 kg
What kind of engine does a John Deere 4066m have?
The John Deere 4M Series has tractors like the 4066M Heavy Duty model. The 4066M Heavy Duty is a type of Compact Utility tractor that is most often used in Agriculture Tractors.
What size tires are on a 4066M heavy-duty?
This 4M Heavy-Duty Tractor is equipped with bigger, tougher tires that keep you going no matter what weather throws at you. Offers two rear tire size options: 16.9-24 (8PR, R4 Industrial, two-position) 19.5L-24 (10PR, R4 Industrial, two-position)
What is the John Deere 4066M?
The John Deere 4066M is a compact utility tractor known for its power, versatility, and reliability in various agricultural and landscaping applications.
Is the John Deere 4066M a two-wheel drive or four-wheel drive tractor?
The John Deere 4066M is a four-wheel drive (4WD) tractor, offering excellent traction and performance in various terrains.
Can the John Deere 4066M handle attachments?
Yes, the John Deere 4066M is compatible with various attachments such as loaders, backhoes, mowers, and more, enhancing its versatility.
What type of transmission does the John Deere 4066M have?
The John Deere 4066M typically has a hydrostatic transmission, offering smooth and effortless speed control.
What is the lifting capacity of the loader on the John Deere 4066M?
The lifting capacity of the loader on the John Deere 4066M typically ranges from around 2,200 to 2,600 pounds, depending on the specific model and attachments.
What is the fuel capacity of the John Deere 4066M?
The fuel capacity of the John Deere 4066M is typically around 13.8 , allowing for extended operation without frequent refueling.
This article I have created to give you the complete information about the John Deere 4066m Specs, Price with its Review.
Check out the given details which help you to know about the John Deere 4066m Specs, and Price with its Review.
For more information visit our website: Commercialvehicleinfo.com
