0

McCormick X2 Series Compact Tractors Price Specifications Features Images

McCormick X2 Series STD / GE Compact Tractors Overview

The McCormick X2 Series are compact nimble tractors best for smooth manoeuvring in tight spots. The hood and cab roof has been totally redesigned with a modern look matching the new McCormick family styling.

The McCormick X2 Series Tractors comes in 2 models: STD with the GE only available in platform version and choice of either cab or platform.

On the McCormick X2 Series Compact Tractor GE model, the design of the front axle and rear final drives provides the driving position to be lowered by 95 mm as correlated to the STD version, this results in better performance in tight and low spaces such as overhead trellis vineyards and greenhouses.

McCormick X2 Series Compact Tractors designed with 24-inch rear tyres, It has a minimum overall width of 1254 mm and a steering wheel height of only 1218 mm, making them perfect compact Tractors.

So if you have no idea about the McCormick X2 Series Compact Tractors price list, technical parts specifications, Key features, then you have been placed at the perfect place, cause here you can get the everything which you need to know about the McCormick X2 Series Compact Tractors. Ok, let’s check out each single model information below.

McCormick X2 Series Compact Tractors Advantages

  • YANMAR 4-CYLINDER NATURALLY ASPIRATED AND TURBOCHARGED ENGINES
  • HOOD AND CAB ROOF DESIGN
  • MATCHING THE NEW McCORMICK FAMILY STYLING
  • TWO MODELS – STD AND GE. GE MODEL WITH DRIVING POSITION LOWERED BY 95 MM
  • FRONT HITCH AND PTO AVAILABLE AS OPTION
  • 12/12 SPEED TRANSMISSION WITH OPTIONAL CREEPER
  • SYNCHRO SHUTTLE LEVER ADJACENT TO THE STEERING WHEEL
  • CAB WITH ALL-ROUND VISIBILITY FOR THE STD VERSION
  • DRIVING POSITION WITH FULLY ADJUSTABLE STEERING WHEEL AND SEAT

McCormick X2.20 Compact Tractor

McCormick X2.20 Compact Tractor

McCormick X2.20 Tractor Price

Please, friends, contact us your Nearest Tractor Dealer

McCormick X2.20 Tractor Quick Facts

  • Engine: 4TNV84-KLAN Yanmar Direct-Injection Engine Tier 3
  • Maximum power(ISO): 44 Hp
  • Rated Speed: 2800 rpm
  • Fuel Tank Capacity: 40 Liters
  • Transmission:  Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
  • PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
  • Net PTO Power: 40 Hp
  • Brakes: Mechanical Control Standard
  • Lifting capacity: 1200 kg

McCormick X2.20 Tractor Specification

ENGINE
YANMAR DIRECT-INJECTION ENGINE TIER3 4TNV84-KLAN
MAX. POWER (ISO) 44 hp /32 kw
RATED SPEED 2800 rpm
MAX. TORQUE 129 nm
MAX. TORQUE-SPEED 1400 rpm
BORE/STROKE 84X90 mm
DISPLACEMENT / CYLINDERS / VALVES 1995 / 4 / 8 CM3
COMPRESSION RATIO 19:1
WATER COOLING Standard
AIR FILTER DRY
FUEL TANK CAPACITY 40 Liters
TRANSMISSION
BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) Standard
BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV Option
POWER TAKE-OFF
MECHANICAL ENGAGEMENT Standard
1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) Standard
2 SPEEDS 540/750 RPM Option
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES Standard
GROUND SPEED PTO ONLY WITH TWO-SPEED PTO Option
NET PTO POWER (ISO) 40 hp / 29 Kw
FRONT PTO
MECHANICAL ENGAGEMENT Option
1 SPEED 1000 RPM Option
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES Option
4WD FRONT AXLE
MECHANICAL ENGAGEMENT Standard
MAX. STEERING ANGLE 55°
TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS Standard
CLUTCH
INDEPENDENT DRY DUAL CLUTCH 9 IN (228 MM)
MECHANICAL ENGAGEMENT Standard
BRAKES
MECHANICAL CONTROL Standard
WET DISC REAR BRAKES, 6 DISCS Standard
HYDRAULIC POWER LIFT
DRAFT AND POSITION CONTROL FUNCTIONS Standard
MECHANICALLY OPERATED Standard
LIFTING CAPACITY 1200 KG
MAX. OPERATING PRESSURE 180 Bar
TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) 28 + 19.7  L/MIN
THREE-POINT LINKAGE CAT. 1
REAR REMOTE VALVES 2 Standard / 3 Option
FRONT POWER LIFT
MECHANICALLY OPERATED Option
LIFTING CAPACITY 400 kg Option
THREE-POINT LINKAGE CAT. 1  Option
CAB AND DRIVING POSITION
X2 SERIES CAB / RADIO FITTING FACILITY NO FOPS option / FOPS option
HEATING / VENTILATION option
AIR-CONDITIONING option
OPENING REAR AND FRONT WINDSCREENS option
REAR WIPER option
ANALOG INSTRUMENTS Standard
SPRUNG SEAT Standard
ISO-MOUNTED PLATFORM Standard
DIMENSIONS AND WEIGHTS WITH STANDARD TYRES STD            |              GE
FRONT TYRES 260/70R16   |  240/70R16
REAR TYRES 320/70R24   |  320/70R24
A – HEIGHT TO SAFETY FRAME  mm 2097          |  2003
A – HEIGHT OVER CAB mm 2307          | NA
B – WHEELBASE 4WD  mm 1760
C – TOTAL LENGTH WITH BALLAST WEIGHTS  mm 3225
D – GROUND CLEARANCE  mm 385           |    295
E – MIN. WIDTH  mm 1383         |   1254
F – HEIGHT TO STEERING WHEEL  mm 1312         |   1218
G – FRONT TRACK ADJUSTMENT   mm 1083 – 1314
H – REAR TRACK ADJUSTMENT   mm 872 – 1258
TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) 1460 kg

McCormick X2.30 Compact Tractor

McCormick X2.30 Compact Tractor

McCormick X2.30 Tractor Price

Please, friends, contact us your Nearest Tractor Dealer

McCormick X2.30 Tractor Quick Facts

  • Engine: 4TNV88-KLAN Yanmar Direct-Injection Engine Tier 3
  • Maximum power(ISO): 47.5 Hp
  • Rated Speed: 2800 rpm
  • Fuel Tank Capacity: 40 Liters
  • Transmission:  Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
  • PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
  • Net PTO Power: 43 Hp
  • Brakes: Mechanical Control Standard
  • Lifting capacity: 1200 kg

McCormick X2.30 Tractor Specification

ENGINE
YANMAR DIRECT-INJECTION ENGINE TIER3 4TNV88-KLAN
MAX. POWER (ISO) 47.5 hp /35 kw
RATED SPEED 2800 rpm
MAX. TORQUE 141 nm
MAX. TORQUE-SPEED 1200 rpm
BORE/STROKE 88X90 mm
DISPLACEMENT / CYLINDERS / VALVES 2189 / 4 / 8 CM3
COMPRESSION RATIO 19:1
WATER COOLING Standard
AIR FILTER DRY
FUEL TANK CAPACITY 40 Litres
TRANSMISSION
BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) Standard
BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV Option
POWER TAKE-OFF
MECHANICAL ENGAGEMENT Standard
1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) Standard
2 SPEEDS 540/750 RPM Option
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES Standard
GROUND SPEED PTO ONLY WITH TWO-SPEED PTO Option
NET PTO POWER (ISO) 43 hp / 32 Kw
FRONT PTO
MECHANICAL ENGAGEMENT Option
1 SPEED 1000 RPM Option
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES Option
4WD FRONT AXLE
MECHANICAL ENGAGEMENT Standard
MAX. STEERING ANGLE 55°
TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS Standard
CLUTCH
INDEPENDENT DRY DUAL CLUTCH 9 IN (228 MM)
MECHANICAL ENGAGEMENT Standard
BRAKES
MECHANICAL CONTROL Standard
WET DISC REAR BRAKES, 6 DISCS Standard
HYDRAULIC POWER LIFT
DRAFT AND POSITION CONTROL FUNCTIONS Standard
MECHANICALLY OPERATED Standard
LIFTING CAPACITY 1200 KG
MAX. OPERATING PRESSURE 180 Bar
TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) 28 + 19.7  L/MIN
THREE-POINT LINKAGE CAT. 1
REAR REMOTE VALVES 2 Standard / 3 Option
FRONT POWER LIFT
MECHANICALLY OPERATED Option
LIFTING CAPACITY 400 kg Option
THREE-POINT LINKAGE CAT. 1  Option
CAB AND DRIVING POSITION
X2 SERIES CAB / RADIO FITTING FACILITY NO FOPS option / FOPS option
HEATING / VENTILATION option
AIR-CONDITIONING option
OPENING REAR AND FRONT WINDSCREENS option
REAR WIPER option
ANALOG INSTRUMENTS Standard
SPRUNG SEAT Standard
ISO-MOUNTED PLATFORM Standard
DIMENSIONS AND WEIGHTS WITH STANDARD TYRES STD             |       GE
FRONT TYRES 260/70R16   |  240/70R16
REAR TYRES 320/70R24   |  320/70R24
A – HEIGHT TO SAFETY FRAME 2097            |  2003
A – HEIGHT OVER CAB MM 2307             | NA
B – WHEELBASE 4WD MM 1760
C – TOTAL LENGTH WITH BALLAST WEIGHTS  MM 3225
D – GROUND CLEARANCE  MM 385               |    295
E – MIN. WIDTH  MM 1383             |   1254
F – HEIGHT TO STEERING WHEEL  MM 1312             |   1218
G – FRONT TRACK ADJUSTMENT  MM 1083 – 1314
H – REAR TRACK ADJUSTMENT  MM 872 – 1258
TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) 1460 kg

McCormick X2.40 Compact Tractor

McCormick X2.40 Compact Tractor

McCormick X2.40 Tractor Price

Please, friends, contact us your Nearest Tractor Dealer

McCormick X2.40 Tractor Quick Facts

  • Engine: 4TNV84T-2XLAN Yanmar Direct-Injection Engine Tier 3
  • Maximum power(ISO): 54.2 Hp
  • Rated Speed: 2800 rpm
  • Fuel Tank Capacity: 40 Litres
  • Transmission:  Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
  • PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
  • Net PTO Power: 50,7 Hp
  • Brakes: Mechanical Control Standard
  • Lifting capacity: 1200 kg

McCormick X2.40 Tractor Specification

ENGINE
YANMAR DIRECT-INJECTION ENGINE TIER3 4TNV84T-2XLAN
MAX. POWER (ISO) 54.2 hp /39.9 kw
RATED SPEED 2800 rpm
MAX. TORQUE 159,5 nm
MAX. TORQUE-SPEED 1200 rpm
BORE/STROKE 84X90 mm
DISPLACEMENT / CYLINDERS / VALVES 1995 /4 TURBO /16 cm 3
COMPRESSION RATIO 18.9:1
WATER COOLING Standard
AIR FILTER DRY
FUEL TANK CAPACITY 40 Litres
TRANSMISSION
BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) Standard
BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV Option
POWER TAKE-OFF
MECHANICAL ENGAGEMENT Standard
1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) Standard
2 SPEEDS 540/750 RPM Option
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES Standard
GROUND SPEED PTO ONLY WITH TWO-SPEED PTO Option
NET PTO POWER (ISO) 50,7 hp / 37,3 Kw
FRONT PTO
MECHANICAL ENGAGEMENT Option
1 SPEED 1000 RPM Option
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES Option
4WD FRONT AXLE
MECHANICAL ENGAGEMENT Standard
MAX. STEERING ANGLE 55°
TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS Standard
CLUTCH
INDEPENDENT DRY DUAL CLUTCH 9 IN (228 MM)
MECHANICAL ENGAGEMENT Standard
BRAKES
MECHANICAL CONTROL Standard
WET DISC REAR BRAKES, 6 DISCS Standard
HYDRAULIC POWER LIFT
DRAFT AND POSITION CONTROL FUNCTIONS Standard
MECHANICALLY OPERATED Standard
LIFTING CAPACITY 1200 KG
MAX. OPERATING PRESSURE 180 Bar
TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) 28 + 19.7  L/MIN
THREE-POINT LINKAGE CAT. 1
REAR REMOTE VALVES 2 Standard / 3 Option
FRONT POWER LIFT
MECHANICALLY OPERATED Option
LIFTING CAPACITY 400 kg Option
THREE-POINT LINKAGE CAT. 1  Option
CAB AND DRIVING POSITION
X2 SERIES CAB / RADIO FITTING FACILITY NO FOPS option / FOPS option
HEATING / VENTILATION option
AIR-CONDITIONING option
OPENING REAR AND FRONT WINDSCREENS option
REAR WIPER option
ANALOG INSTRUMENTS Standard
SPRUNG SEAT Standard
ISO-MOUNTED PLATFORM Standard
DIMENSIONS AND WEIGHTS WITH STANDARD TYRES STD            |          GE
FRONT TYRES 260/70R16  |  240/70R16
REAR TYRES 320/70R24  |  320/70R24
A – HEIGHT TO SAFETY FRAME 2097           |  2003
A – HEIGHT OVER CAB MM 2307           |  NA
B – WHEELBASE 4WD MM 1760
C – TOTAL LENGTH WITH BALLAST WEIGHTS  MM 3225
D – GROUND CLEARANCE  MM 385              |    295
E – MIN. WIDTH  MM 1383             |   1254
F – HEIGHT TO STEERING WHEEL  MM 1312             |   1218
G – FRONT TRACK ADJUSTMENT  MM 1083 – 1314
H – REAR TRACK ADJUSTMENT  MM 872 – 1258
TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) 1460 kg

McCormick X2 Series Tractors Video

That was all about the McCormick X2 Series Tractors, I hope it helps to you for buy or sell this  model tractors but if you have any problem then please comment below in the comment box, we will solve your problem as soon as possible, Thanks for visiting our site and stay tuned with me for more stuff like this friends.

commercialvehicle123

Leave a Reply

Your email address will not be published. Required fields are marked *