John Deere 3046r Specs, Price & Review 2022

The John Deere 3046R is a compact 4WD utilitarian tractor of the 3R series. The tractor has been produced through John Deere in Augusta, Georgia, the USA since 2014.

The JD3046R comes with the 1.6 three-cylinder diesel engine, as well as a hydrostatic transmission that has infinite (3-range) for forward as well as reverse gears.

The John Deere 3046R compact utility tractor was powered by a three-cylinder engine Yanmar3TNV86.

It’s an 1.6 L 1,599 cm 2, (97.6 cu*in) three-cylinder turbocharged diesel engine. It has 86.0 millimeters (3.39 inches) of bore diameter and 90.0 millimeters (3.54 inches) of stroke.

The compression ratio is 19.0:1. This engine put out 46.6 PS (34.3 kW; 46.0 HP) at 2600 rpm, the maximum power.

The John Deere3046R is powered by steering with wet disc brakes two-post foldable ROPS and a cabin with air conditioning (optional) in addition to 51.1 Liters (13.5 US gal.; 11.2 Imp. gallon) tanks for fuel in ROPS versions, or 44.5 milliliters (11.8 US gal.; 9.8 Imp. gallon) to Cab version.

John Deere 3046r

John Deere 3046r Price

John Deere 3046R Compact Utility Tractor Price: $31,003.00USD

John Deere 3046r Features

  • 45hp Turbo Charged Yanmar Diesel Engine (37 PTO hp)
  • eHydro Hydrostatic Transmission Standard
  • Four Wheel Drive with Differential Lock
  • Dual Hydraulic Pumps Producing 15.9gpm Capacity
  • Built-in Safety Features

John Deere 3046r Quick Specs

  • Manufacturer:  John Deere
  • Engine Brand:  Yanmar
  • Engine Power:  45 hp
  • Fuel Capacity:  13.5
  • Transmission:  eHydro
  • Drive Wheels:  MFWD
  • Total Hydraulic Output:  13.9 gpm

John Deere 3046r Specification

3-Point Hitch

Category Category 1
Lift capacity (24-in. behind link arms) 997.9 kg (2,200 lbs)


Approximate shipping weight (open-station; cab) ROPS – 1315.4 kg, Cab – 1619.3 kg
Front Axle Clearance 12.2 in (31 cm)
Turning radius with brakes 2.7 METERS
Wheelbase 68 ft (21 m)

Electrical System

Alternator (12-V) 75 amp
Battery size 500 CCA
Starter size 1.9 hp (1 kw)


Air cleaner Dual element with electronic restriction indicator
Aspiration Turbocharged and charged air cooled
Bore 3.4 in (9 cm)
Compression ratio 19.1:1
Cooling system Water pump
Cylinder liners Cast-In-Block
Displacement 95.9 cu in (0 m)
Emissions compliance Final Tier 4
Engine Manufacturer Yanmar
Engine Model 3TNV86CHT-MJT
Engine torque at rated speed 112 Nm
Engine Type Diesel
Fuel tank capacity Rollover protective structure (ROPS) – 51.1 L, Cab – 44.7 L
Gross Power 44.7 hp (33 kW)
Injection pump type High-pressure common rail direct injection
Lubrication Pressurized
Number of Cylinders 3
Power take-off (PTO) power 36.6 hp (27 kW)
Rated engine speed 2600 rpm
Stroke 3.6 in (9 cm)

Final Drive

Final Drive Type Bull Gear

Fluid Capacities

Crankcase with filter 5.7 L
Transmission and hydraulic system 25.7 L

Fuel System

Fuel consumption 10.6 L/hr
Fuel System Type High-pressure common rail direct injection

Hydraulic System

Draft control sensing Position control
Hydraulic Type Open Center
Maximum operating pressure 2500 psi
Pump rated output Steering – 22.3 L/min, Implement – 32.5 L/min
Pump Type Dual gear
Remote control valves are available Up to four rear remotes

Operator Station

Gear shift location – console/floor Left Hand Side
Platform – flat/straddle Flat
Rollover protective structure Type Foldable Yes

Power Take-Off (PTO)

Brake (for mid and rear PTO) Multiple wet disc
Clutch Multiple wet disc
Control Position control
Engagement method Electro-hydraulic
Optional Mid – 2000 rpm
Standard Rear – 540 rpm


Front Tires Size Farm – 7-14 Turf (Gear 4WD) – 27×8.50-15 Turf (HST 4WD) – 25×10.5LLx15 R4 – 25×8.5-14
Front tread range 114 CENTIMETERS
Rear Tires Size Farm – 11.2-24 Turf – 41×14-20 or 41x18LL-16.1 R4 – 15-19.5
Rear tread spacing 103.1 CENTIMETERS


Axle capacity Front – 720-1450 kg
Brakes Multi-plate wet disc
Creeper SpeedMatch optional
Cruise control Standard
Final Drive Type Bull Gear
Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Steering Hydrostatic power steering
Transmission gear ranges 12F/12R PowrReverser (PRT) Infinitely variable – 3 range

John Deere 3046r Attachments

Attachment overview
60.9″ mid-mount mower deck
72.8″ mid-mount mower deck
Front-end loader

60.9″ Mower deck

Type: mid-mount John Deere 60D
Cutting width: 60.9 inches
154 cm
Weight: 324 lbs
146 kg
Overall width: 75.3 inches
191 cm
Cut height: 1.5 to 5 inch
3 to 12 cm

72.8″ Mower deck

Type: mid-mount John Deere 72D
Cutting width: 72.8 inches
184 cm
Weight: 345 lbs
156 kg
Overall width: 86 inches
218 cm
Cut height: 1.5 to 5 inch
3 to 12 cm

John Deere H160 Loader

Height (to pin): 90 inches
228 cm
Lift to full height (at pin): 1360 lbs
616 kg

John Deere H165 Loader

Height (to pin): 102 inches
259 cm
Lift to full height (at pin): 1598 lbs
724 kg

John Deere 3046r Weight

John Deere 3046r Wheelbase is 68 inches 172 cm and Weight is 2900 to 3570 pounds

John Deere 3046r Width


Dear readers, all of the information is in relation to the John Deere 3046R compact utility tractor therefore I hope that you are satisfied with the information that we have provided, however at this point, if there are any questions in connection with our article, you are able to leave a message in the box below, and we’ll be sure to reply to you with a correct answer as we are always available to assist you. Thank you for your time.

John Deere 3046r FAQ

How much horsepower is a John Deere 3046R?

33.9 hp

How much can a John Deere 3046R lift?

2530 lbs

What is the weight of the John Deere 3046R?

2900 to 3570 pounds