A 4WD lawn and garden tractor from the X700 series is the John Deere X758. Since 2013, John Deere has been producing this tractor in Horicon, Wisconsin, in the United States.
The JD X758 is powered by a shaft-driven hydrostatic gearbox with infinite forward and backward gears and a 1.0 L (60.6 cu in) three-cylinder diesel engine.
The Yanmar 3TNM74 engine was used in the John Deere X758 garden tractor. It has a three-cylinder, naturally aspirated diesel engine with a displacement of 1.0 L (993 cm2), 74.0 mm (2.91 in) of the cylinder bore, and 77.0 mm (3.03 in) of the piston stroke.
The rating for compression ratio is 23.2:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) of output power. This tractor’s Yanmar 3TNM72 engine was used in the export version.
The John Deere X758 has a 19.7 liter (5.2 US gal; 4.3 Imp. gal) fuel tank, internal wet disc brakes, an open operator station, and hydrostatic power steering.
Contents
John Deere x758 Quick Specs
- Manufacturer: John Deere
- Engine Brand: Yanmar
- Engine Power: 24 HP
- Fuel Capacity: 5.2
- Drive System: Hydrostatic Drive
- Transmission: Commercial Hydrostatic
- Drive Wheels: All-Wheel Drive
- Cutting Width: 54″
John Deere x758 Features
- 24HP 3 Cylinder iTorque Diesel Engine
- All Time Four Wheel Drive
- Hydraulic Power Steering and Tilt Steering Wheel
- Deluxe High Back Seat with With Coil Suspension
- Hydrostatic Drive Transaxle with Differential Lock
- High Capacity Drive Over Decks With Hydraulic Lift
John Deere x758 Serial Number
| 2013 | 010001 |
| 2014 | 020001 |
| 2015 | 030001 |
| 2016 | 040001 |
| 2017 | 050001 |
| 2018 | 060001 |
| 2019 | 070001 |
| 2020 | 080001 |
| 2021 | 090001 |
John Deere x758 Specification
| Engine power | 24 hp 17.9 kW |
| Engine manufacturer/model | 3TNM74F |
| Transaxle type | K90 hydrostatic integrated with transaxle |
| Transaxle control | Twin Touch™ pedals |
| Rear tires | 26×12-12 HDAP |
| Lift system type | Two-function hydraulic |
| Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck, 54, 60 in. 137, 152 cm |
Engine
| Power | 24 hp 17.9 kW |
| Displacement | 60.6 cu in. 993 cc |
| Manufacturer/model | 3TNM74F |
| Type | Diesel, overhead valve, full-pressure lube, oil filter |
| Cylinders | Three, cast-iron liners |
| Governor | Mechanical |
| Choke/speed control | One lever |
| Cooling method | Liquid |
| Air cleaner | Paper dry-type with primary and secondary elements |
| Oil change | No tools |
Fuel System
| Type | Diesel |
| Fuel delivery | In-line indirect injection |
| Fuel gauge | Gauge on dash |
| Fuel tank location | Rear |
| Fuel fill opening | On left fender, 3 in. 7.6 cm |
| Fuel tank capacity | 5.2 U.S. gal. 19.7 L |
Electrical System
| Battery | 12 V 500 CCA |
| Charging system | Engine-mounted alternator, regulated, 40 amp |
| Engine starter | Solenoid shift |
| Hour meter | Yes |
| Headlights | Two standards, halogen, 37 W |
| Taillights or reflector | Taillights |
| Backup lights | Yes |
| Rear work lights | Yes |
| 12-V outlet | Yes |
Transaxle
| Type | K90 hydrostatic integrated with transaxle |
| Control | Twin Touch™ pedals |
| Cruise control | Yes |
| Oil cooler | Yes |
| Oil filter | Replaceable suction side 10 micron |
| Differential lock | Standard |
| Forward speed | 0-8.5 mph 0-13.7 km/h |
| Reverse speed | 0-6 mph 0-9.7 km/h |
| Brakes | Internal wet disc |
Chassis
| Frame | Welded heavy-duty |
| Primer/paint | E-coat/powder |
| Weight bracket | Standard front – holds up to four Quik-Tatch weights, 42 lb 19 kg |
| Receiver hitch | Yes, front |
| Front axle | JDM BA8 nodular iron casting |
| Front tires | 18×8.5-10 HDAP |
| Rear tires | 26×12-12 HDAP |
| Hood material | Noryl GTX902, painted |
| Fender deck material | RIM with in-mold paint |
| Floor mats | Sure-grip rubber |
| Storage | Covered toolbox |
| Service interval decal | Yes |
| Fender handles/grips | Handles |
| Cup holder | Yes |
| Equipment mounting | Optional category 1 3-point hitch |
Steering
| ype | Hydraulic power |
| Four-wheel steer | Not available on this model |
| Steering wheel | 14 in. 35.6 cm |
| Tilt steering wheel | Standard, six position |
| Turning radius | 25 in. 63.5 cm |
| Uncut circle radius | 54 HC, 32 in. 63.5 cm 60 HC, 28 in. 71.1 cm |
Lift System
| Type | Two-function hydraulic |
| Hydraulic outlets | Four, standard |
| Mower cut height | 1-5.25 in. 2.5-13.3 cm |
| Cut height increments | 0.25 in. 0.64 cm |
| Preset cut height | Yes |
Safety
| Meets ANSI standard | Yes |
| Meets OPEI standard | Yes |
| Backup protection | Reverse Implement Option (RIO) |
| Safety video | Yes |
Optional equipment
| Mowers | 48A, 54 HC, 60 HC |
| Rear bagger | 7, 14, 19 bu 250, 500, 670 L |
| Powered material collection | Power Flow, 7, 14, 19 bu 250, 500, 670 L |
| Mulching system | Yes, MulchControl™ |
| Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
| Front blade | 54 in. 137.2 cm |
| Snowblower | Two-stage, 47, 54 in. 119.4, 137.2 cm |
| Rotary broom | 52, 60 in. 132.1, 152.4 cm |
| Rotary tiller | 42, 48 in. 106.7, 121.9 cm |
| 3-point hitch | Category 1 |
| Rear power take-off (PTO) | 540 rpm |
| Plow, moldboard | Adjustable, 8-14 in. 20.3-35.6 cm |
| Box scraper | 48 in. 121.9 cm |
| Cultivator | Adjustable, 30-46 in. 76.2-116.8 cm |
| Rear blade | 60 in. 152.4 cm |
| Disk harrow | Adjustable, 42-52 in. 106.7-132.1 cm |
| Landscape rake | 60 in. 152.4 cm |
| Sprayer | Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L Mounted, 25 U.S. gal. 94.6 L |
| Spreader | Tow-behind, 125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg |
| Front bumper | Standard bumper/weight bracket |
| Brush guard | Yes |
| Weather protection | Hard-side cab, weather enclosure |
| Rear receiver hitch | 1.25 x 1.25 in. 3.18 x 3.18 cm |
| Bucket holder | Yes, double bucket |
| Grass striping | Grass groomer kit, 48-in. (122 cm) mower only |
| Tractor shovel | 54 in. 137.2 cm |
| Front loader | Not available |
| Tow-behind tools | 21 |
Dimensions
| Height | 54.5 in. 138 cm |
| Overall length | 75 in. 190.5 cm |
| Wheelbase | 55.7 in. 141.5 cm |
| Width with mower | 48A, 62.5 in. 159 cm 54 HC, 64.5 in. 163.8 cm 60 HC, 74 in. 188 cm |
| Width with mower (deflector raised for storage) | 48A, 53.6 in. 136 cm 54 HC, 57.5 in. 146.1 cm 60 HC, 62 in. 157.5 cm |
| Width without mower | 47 in. 119.4 cm |
| Weight | No fuel or mower, 1,032 lb 468 kg |
John Deere x758 Attachments
- Mid-mount John Deere
- Mid-mount John Deere
- Mid-mount John Deere
- Front-mount John Deere
John Deere x758 Problems
- Engine Starting Problems
- Rough Running Engine
- Engine Overheating
- Electrical System Issues
- Mechanical Issues
John Deere x758 Reviews
John Deere x758 FAQ
What engine is in a John Deere X758?
3-cylinder diesel engine
How much horsepower does a John Deere X758 have?
24 hp (17.9 kW)
How much does a John Deere X758 weight?
John Deere X758 Wheelbase is 54.5 inches 138 cm and Weight is 1038 lbs 470 kg
I am Dipak Salvi. I’ve been a blogger since 2010, and I love to write. I really like to write about cars, technology, and money. I also write about fitness and health. I run a lot of blogs, such as https://commercialvehicleinfo.com. You can contact me at [email protected]