Massey Ferguson 35 Price, Specs, Weight, Review, Horsepower, Oil Capacity, Attachments, And Parts

Hey, Farmers! Are you confused about the Massey Ferguson tractor model, and do you know about the Massey Ferguson 35 tractor Specs, Weight, Review, Horsepower, Oil Capacity, Attachments, And Parts?

So don’t worry my friends here in this article we are providing all kinds of information about the Massey Ferguson 35 tractor price, Key specifications, key features, and its implements such as the front loader, mid-mount mower, and backhoe features.

That all kinds of information are genuine and reliable, and you can trust it. No one can cheat on you after reading this post.

Massey Ferguson 35 Price, Specs, Weight, Review

Massey Ferguson 35 price

The Massey Ferguson 35 in the United States is between $4,500 and $8,500.

Massey Ferguson 35 Horsepower

The Massey Ferguson 35 tractor has a gross power of 44.5 horsepower (33.2 kW).

Massey Ferguson 35 lift Capacity

The Massey Ferguson 35 tractor has a maximum lift capacity of 1100 kilograms (2425 pounds).

Massey Ferguson 35 Weight

The Massey Ferguson 35 tractor Operating weighs 3192 pounds (1448 kilograms).

Massey Ferguson 35 Oil Capacity

The oil capacity of the Massey Ferguson 35 tractor engine is 6 quarts (5.7 liters).

Massey Ferguson 35 Serial Numbers

1960 204181
1961 211071
1962 222207
1963 235123
1964 247605

Massey Ferguson 35 Specs

Manufacturer Massey Ferguson
Utility tractor
Built-in Detroit, Michigan, USA
The original price was $2,529 in 1963
The gasoline engine was available after 1961.
35 ag tractor
35 Utility industrial
35 Turf low-profile
Two-wheel drive
Differential lock rear optional
Steering manual recirculating ball
Independent manual shoe/drum brakes
Open operator station.
Capacity 8 gal
30.3 L
Pressure 2800 psi
193.1 bar
Pump flow 3.5 gpm
13.2 lpm
Power Take-off (PTO)
Rear PTO transmission
  two-stage clutch Opt
Rear RPM ground/540 (1.375)
Engine RPM 540@1700
Charging system generator
Charging amps 12
Gas Batteries 1
Diesel Batteries 2
Gas Battery volts 12
Diesel Battery volts 6

Massey Ferguson 35 Engine

Engines overview
Perkins 2.5L 3-cyl diesel
Continental 2.2L 4-cyl gasoline

Engine Detail

Engine Detail Perkins 3.152diesel3-cylinder liquid-cooled
Displacement 152.7 ci
2.5 L
Bore/Stroke 3.60×5.00 inches
91 x 127 mm
Compression 17.4:1
Rated RPM 2000
Firing order 1-2-3
Starter volts 12

Engine Detail

Engine Detail Continentalgasoline4-cylinder liquid-cooled OHV
Displacement 134 ci
2.2 L
Bore/Stroke 3.3125×3.875 inches
84 x 98 mm
Compression 6.6:1
Rated RPM 2200
Idle RPM 450-2250
Firing order 1-3-4-2
Starter volts 12
Coolant capacity 10 qts
9.5 L
Sparkplug 18mm
Sparkplug gap 0.025 inches
0.635 mm
Intake valve clearance 0.013 inches*
0.330 mm
Exhaust valve clearance 0.013 inches*
0.330 mm

Massey Ferguson 35 Transmission

Transmissions overview
6-speed gear
12-speed partial power shift
Type gear
Gears 6 forward and 2 reverse
Clutch dry disc
Oil Capacity 32 qts
30.3 L
Oil type SAE 80 GL1
Transmission Multi-Power
Type partial power shift
Gears 12 forward and 4 reverse
Oil Capacity 32 qts
30.3 L
Oil type SAE 80 GL1

Massey Ferguson 35 Dimensions

Massey Ferguson 35 Tires
Ag front 5.50-16
Ag rear 10-28
Wheelbase 72 inches
182 cm
Length 117 inches
297 cm
Width 63.5 inches
161 cm
Height 54 inches
137 cm
Clearance (front axle) 20.5 inches
52 cm
Front tread 48 to 80 inches
121 to 203 cm
Rear tread 48 to 76 inches
121 to 193 cm
Massey Ferguson 35 Weight
Gas Shipping 2,982 lbs
1352 kg
Diesel Operating  3192 pounds (1448 kilograms).
Ballasted 5,909 lbs
2680 kg

Massey Ferguson 35 Tests

Nebraska Tractor Test 744 Diesel 6-speed 2WD
May 16 – 23, 1960
Link: Nebraska Tractor Test 744 file
PTO performance
Power at rated engine speed 37.04 hp
27.6 kW
Fuel use 2.4 gal/hour
9.1 l/hour
Power at rated PTO speed 29.84 hp
22.3 kW
Fuel use 1.9 gal/hour
7.2 l/hour
Drawbar performance
Max power 32.13 hp
24.0 kW
Fuel use 2.3 gal/hour
8.7 l/hour
Gear 4 was used for the power test.
Max pull 3,965 lbs
1798 kg
Gear 2 was used for the pull test.

Massey Ferguson 35 Attachments

lift (full at pin) 38 Loader1000 lbs 453 kg
breakout 2000 lbs
907 kg
height (at pin) 94.5 inches
240 cm
clearance (dumped) 82.5 inches
209 cm
weight 615 lbs, 278 kg
Bucket width 36 inches
91 cm

Check, Also

Massey Ferguson 35 Problems

  • Engine issues: The Massey Ferguson 35 tractor operates on Perkins diesel engines that are extremely reliable. However, the most typical engine problems that may be encountered include fuel injection issues as well as compression loss and overheating.
  • Hydraulic issues: The hydraulic system on the Massey Ferguson 35 tractor is responsible for driving the lift arms and various other attachments to hydraulics. Common hydraulic issues can be caused by leaks or weak lift and unsteady control.
  • Electrical issues: Massey Ferguson 35 Tractors have a fairly basic electrical system, however, there are still issues that can arise like battery failure or alternator malfunction, as well as wiring issues.
  • Transmission issues: The transmission on the Massey Ferguson 35 tractor is responsible for transferring power from the engine onto the wheels. Common transmission problems include slipping gears, grinding gears, and difficulty shifting gears.

Massey Ferguson 35 Parts

Part Description
Engine block The main casting of the engine, houses the cylinders, crankshaft, and other components.
Cylinder head The cover for the top of the engine block contains the combustion chambers and valves.
Pistons The moving parts inside the cylinders are driven by the crankshaft.
Piston rings The rings seal the gap between the pistons and the cylinder walls.
Crankshaft The rotating shaft drives the pistons and other engine components.
Camshaft The shaft that operates the valves.
Connecting rods The rods that connect the pistons to the crankshaft.
Valves The ports allow air and fuel into and out of the cylinders.
Springs The springs that keep the valves closed.
Pushrods The rods transmit the motion of the camshaft to the valves.
Lifters The components that transmit the motion of the pushrods to the valves.
Rocker’s arms The components that open and close the valves.
Pushrod tubes The tubes that guide the pushrods.
Head gasket The seal between the engine block and the cylinder head.
Valve cover gasket The seal between the valve cover and the cylinder head.
Oil pan gasket The seal between the oil pan and the engine block.
Main bearings The bearings that support the crankshaft.
Connecting rod bearings The bearings that support the connecting rods.
Camshaft bearings The bearings that support the camshaft.
Timing chain The chain that connects the crankshaft to the camshaft.
Timing gears The gears that drive the timing chain.
Oil pump The pump circulates oil throughout the engine.
Water pump The pump circulates coolant throughout the engine.
Fuel pump The pump delivers fuel to the engine.
Air filter The filter that cleans the air before it enters the engine.
Fuel filter The filter that cleans the fuel before it enters the engine.
Oil filter The filter cleans the oil before it circulates throughout the engine.
Radiator The component that cools the engine coolant.
Fan The component that circulates air through the radiator.
Flywheel The heavy wheel is bolted to the crankshaft and helps to start the engine.
Clutch The component that disengages the engine from the transmission.
Transmission The component that changes the speed and direction of the engine’s power.
Differential The component that splits the power from the transmission to the two rear wheels.
Axles The shafts support the wheels and transmit power from the differential to the wheels.
Brakes The components that stop the wheels.
Wheels The components that the tires are mounted on.
Tires The rubber components grip the road and provide traction.

Massey Ferguson 35 Review


I hope you like this post. However, Should you have any concerns about this Post, you can leave a comment in the box for comments. I’ll resolve your issue in the shortest time possible.

If you liked this Article, Do share this article to your friends and social media. Thanks for Visiting our Site, Visit our Website at for Additional Details.


Q: What is the Massey Ferguson 35?

A: The Massey Ferguson 35 is a small-sized tractor manufactured from 1956 until 1964. It was a very popular tractor among farmers and small companies due to its low cost and flexibility.

It was a versatile tractor that could be used for a variety of purposes. MF 35 was available in both diesel and gasoline versions, and could be fitted with various attachments, including mowers, plows, and loaders.

Q: What are the specifications of the Massey Ferguson 35?

A: The Massey Ferguson 35 features a four-cylinder engine which produces 36 hp (27 kW) at 2500 RPM. It is a manual transmission that has five gears forward as well as one reverse gear.

Its MF 35 has a top speed of 16.4 mph (26.4 km/h). It comes with an adjustable three-point hitch to attach equipment and can be lifted up to 3,500 tons (1,361 tonnes).

Q: What are the common uses for the Massey Ferguson 35?

A: The Massey Ferguson 35 is a versatile tractor that can be used for a variety of tasks, including:

  • Plowing
  • Mowing
  • Hauling
  • Loading
  • Tilling
  • Disking
  • Planting
  • Cultivating
  • Snow removal
  • Construction

Q: What are the advantages of the Massey Ferguson 35?

A: The Massey Ferguson 35 has a number of advantages, including:

  • It is affordable.
  • It is versatile.
  • It is reliable.
  • It is easy to operate and maintain.
  • There is a wide range of parts and attachments available.

Q: What are the disadvantages of the Massey Ferguson 35?

A: The Massey Ferguson 35 has a few disadvantages, including:

  • It is relatively slow.
  • It is not as powerful as some other tractors.
  • It can be uncomfortable to operate for long periods of time.

Q: How much does a Massey Ferguson 35 cost?

A: The price of a Massey Ferguson 35 varies depending on its condition and the attachments that are included. However, you can expect to pay between \$3,000 and \$10,000 for a used MF 35 in good condition.

Q: Where can I buy a Massey Ferguson 35?

A: Massey Ferguson 35 tractors can be purchased from a variety of sources, including:

  • Tractor dealerships
  • Online marketplaces
  • Private sellers

Q: How do I maintain a Massey Ferguson 35?

A: One of the best ways to keep the condition of a Massey Ferguson 35 is to adhere to the manufacturer’s guidelines. This means frequent oil changes as well as filters as well as other fluids. It is also crucial to regularly check the tractor for indications of wear or damage.

Q: What are some common problems with the Massey Ferguson 35?

A: Some common problems with the Massey Ferguson 35 include:

  • Oil leaks
  • Clutch problems
  • Transmission problems
  • Electrical problems
  • Engine problems

Q: How do I troubleshoot problems with my Massey Ferguson 35?

A: If you are experiencing problems with your Massey Ferguson 35, you can consult the owner’s manual for troubleshooting instructions. You can also contact a qualified tractor mechanic for assistance.

Q: What are some tips for operating a Massey Ferguson 35 safely?

A: Here are some tips for operating a Massey Ferguson 35 safely:

  • Always wear appropriate safety gear, such as goggles, gloves, and a hard hat.
  • Be aware of your surroundings and watch out for obstacles.
  • Do not overload the tractor.
  • Be careful when operating the tractor on slopes.
  • Use the tractor’s safety features, such as the rollover protection system (ROPS).

Similar Posts