Bobcat E80: Here in this post, I have taken all the details About the Bobcat E80 from the Official site including Bobcat E80 specs, Weight, Price, and dimensions.

We believe in providing accurate details to our readers and we prefer only Official sources for information. All the details that you want to know about Bobcat E80 can be found in this article which is updated.

You May Like It

Bobcat E80 Specs

Bobcat E80 Overview

The Bobcat E80 stands out as a compact excavator featuring a design with reduced tail swing, enhancing its maneuverability within confined spaces. Below, you’ll find key specifications and attributes of the E80:

Dimensions: Among the compact excavators within the Bobcat range, the E80 claims the largest size. It boasts a transport length of 6.167 meters, a transport width of 2.3 meters, and a transport height of 2.638 meters.

Weight: Weighing in at approximately 8.5 tonnes during operation, the E80 holds an excavator weight of 8.38 tonnes.

Bucket Digging Force: The E80 showcases an impressive bucket digging force, measured at 12,280 pounds-force (lbf).

Maximum Reach: When at ground level, the E80 achieves a maximum reach of 294 inches.

Tail Swing Type: The E80 incorporates a minimal tail swing design, further enhancing its maneuverability.

Hydraulics: Equipped with robust hydraulics and quick cycle times, the E80 empowers users to effectively tackle demanding tasks with efficiency.

Bobcat E80 Price

2012 BOBCAT E80: USD $4,100

Bobcat E80 Lifting Capacity

The lifting capacity of the Bobcat E80 is 9,325 pounds

Bobcat E80 Weight

The weight of the Bobcat E80 is 18,689 pounds

Bobcat E80 Key Facts

  • Engine Model: A-4JB1
  • Net Power: 54 Hp
  • Operating Weight: 17600lb
  • Fuel Capacity: 26 gal
  • Max Digging Depth: 15.29ft in
  • Hydraulic Pump Flow Capacity: 52.9gal/min

Bobcat E80 Features

Some of the features of the Bobcat E80 excavator include:

  • Powerful Yanmar engine
  • Long reach and powerful hydraulic system
  • Two-speed travel system
  • Spacious and comfortable cab
  • Tilt-up front window
  • Attachment-ready design

Bobcat E80 Specs


Shipping Length Of Unit 21.5ft in
Shipping Height Of Unit 7.83ft in
Max Cutting Height 24.07ft in
Max Loading Height 17.25ft in
Max Reach Along Ground 24.42ft in
Max Vertical Wall Digging Depth 12.75ft in
Max Digging Depth 15.29ft in
Width To Outside Of Tracks 8.17ft in
Length Of Track On Ground 7.35ft in
Ground Clearance 1.35ft in
Height To Top Of Cab 8.5ft in
Tail Swing Radius 5.42ft in
Removal Counterweight Clearance 2.53ft in


Shoe Size 23.63in
Track Gauge 6.14ft in
Drawbar Pull 15421lb
Ground Pressure 3.85psi
Max Travel Speed 3.1mph


Number Of Cylinders 4
Engine Make 2353
Engine Model A-4JB1
Net Power 54hp
Power Measured @ 2100rpm
Displacement 169cu in
Aspiration Natural


Operating Weight 17600lb
Fuel Capacity 26gal
Operating Voltage 12V
Hydraulic System Fluid Capacity 31gal
Alternator Supplied Amperage 30amps
Hydraulic System Relief Valve Pressure 4250psi
Hydraulic Pump Flow Capacity 52.9gal/min

Swing Mechanism

Swing Speed 12.5rpm
Swing Torque 14060lb ft


Reference Bucket Capacity 0.3yd3

Bobcat E80 Bucket Pin Size

Several factors underscore the significance of the Bobcat E80 bucket pin size:

  1. Secure Attachment: The accurate pin size guarantees a proper and secure attachment of the bucket to the excavator.
  2. Safety Concerns: A loose or impaired pin could result in the bucket detaching, posing significant safety hazards.
  3. Preventing Damage: Employing the correct pin size aids in preventing damage to the bucket.

Bobcat E80 Problems With Solution

Certainly, below are several common issues that may arise with the Bobcat E80 excavator, along with their respective solutions:

Issue: Hydraulic System Leaks


Begin by thoroughly examining all hydraulic hoses, connections, and seals for any signs of leaks. Replace any components that are damaged and securely tighten any connections that are loose.

It’s important to regularly inspect and maintain the hydraulic fluid levels to prevent further occurrences of leaks.

Issue: Engine Overheating


To address engine overheating, initiate a cleaning process for the radiator and cooling fins. Eliminate any debris or dirt that might be obstructing the airflow.

Verify that the coolant levels are appropriate and that the mixture is correct. If required, replace a faulty thermostat and maintain vigilance over the engine temperature while it’s operational.

Issue: Bucket Drift


If the bucket exhibits unintentional drifting or movement, it could be due to a malfunctioning control valve. Inspect the control valve to ensure proper operation, and perform cleaning or repairs as necessary. It’s essential to confirm the optimal functioning of the hydraulic system.

Issue: Track Alignment Problems

Solution: In the case of track misalignment or damage, conduct a thorough inspection of the tracks. Adjust the track tension in accordance with the manufacturer’s guidelines. If any track components are worn, replace them to ensure proper alignment.

Issue: Electrical System Malfunctions

Solution: When encountering electrical system issues, inspect the battery and its connections for signs of corrosion and ensure they’re securely attached.

Examine fuses and relays for any damage. Test the various electrical components such as lights, sensors, and switches to pinpoint and replace any faulty parts.

Issue: Slow or Weak Hydraulic Movements

Solution: Begin by inspecting the hydraulic fluid levels and condition. If the fluid appears dirty or degraded, it’s advisable to replace it.

Check for potential blockages in the filters and replace them if necessary. If the problem persists, consider the possibility of a hydraulic pump malfunction that may require professional attention.

Issue: Excessive Vibration


If there’s excessive vibration, conduct a comprehensive inspection of the undercarriage components to identify any wear or damage. Check for any loose bolts or fasteners. If the vibration emanates from the engine area, proceed to inspect and, if needed, replace the engine mounts and related components.

Issue: Unusual Noises


Address unusual noises by first determining their source, whether it’s the engine, hydraulic system, or other components. Inspect for any loose parts, damaged components, or signs of wear. It’s crucial to promptly address these issues to prevent further damage.

Issue: Excessive Fuel Consumption


To tackle excessive fuel consumption, ensure that the engine is appropriately tuned and undergoes servicing as per recommended intervals. Regularly check and clean the air filter, replacing it if it’s clogged. Monitor fuel quality and avoid using contaminated fuel. Address any fuel leaks immediately.

Issue: Uneven or Unstable Operation


In the case of uneven or unstable operation, conduct an inspection of the hydraulic system to ensure balance and symmetry. Check for any damaged hydraulic cylinders or worn components. Adjust the controls and settings to ensure a smooth and balanced operation.

For significant issues or those beyond basic troubleshooting, referring to the Bobcat E80 owner’s manual or reaching out to an authorized Bobcat service center is advisable.

Bobcat E80Attechment

Sure, here is a table of Bobcat E80 attachments:

Attachment Description
Standard bucket A general-purpose bucket that is used for a variety of tasks, such as digging, loading, and carrying.
Hydraulic thumb A hydraulically operated device that is used to grip and hold objects.
Demolition bucket A heavy-duty bucket that is used for breaking up concrete and other hard materials.
Rock bucket A bucket with teeth that is used for digging and breaking up rocks.
Tree shear A device that is used to cut trees.
Trenching bucket A long, narrow bucket that is used for digging trenches.
Power angle hoe A hoe that is powered by hydraulics.
Tilting backhoe A backhoe that can tilt back to allow for loading and unloading.
Loader bucket A bucket that is used for loading and carrying materials.
Grapple A device that is used to grip and hold objects.

Bobcat E80 Review 

The Bobcat E80 is a compact excavator that is known for its power, performance, and versatility. It is powered by a 40.7-horsepower Yanmar engine that provides plenty of power for a variety of tasks.

such as digging trenches, loading trucks, and demolishing structures. The E80 also has a two-speed travel system that allows you to quickly move around the jobsite.

Full review YouTube video check here


That was all about the Bobcat E80 Price, Specs, Review, and Key Features, But if you have any queries regarding this post, then please Comment below in the comment Box, We will Solve your Problem as soon as possible. Thanks for Visiting our Site,

Visit our Website at for Additional Details.

Bobcat E80 FAQs

What is the operating weight of the Bobcat E80 excavator?

The operating weight of the Bobcat E80 excavator is approximately 18,977 pounds (8,615 kg).

What is the maximum digging depth of the Bobcat E80?

The maximum digging depth of the Bobcat E80 is around 15 feet 6 inches (4.72 meters).

What is the engine power of the Bobcat E80 excavator?

The Bobcat E80 is equipped with a diesel engine that provides a power output of around 54.2 horsepower (40.4 kW).

What is the maximum reach at ground level for the Bobcat E80?

The maximum reach at ground level for the Bobcat E80 is approximately 24 feet 3 inches (7.4 meters).

What type of hydraulic system does the E80 use?

The Bobcat E80 features a load-sensing hydraulic system that optimizes performance by adjusting the flow and pressure according to the load requirements.

What is the capacity of the fuel tank on the Bobcat E80?

The fuel tank of the Bobcat E80 has a capacity of around 38.2 gallons (145 liters).

What is the width of the standard tracks on the E80?

The standard track width of the Bobcat E80 is approximately 23.6 inches (600 mm).

Can attachments be easily changed on the E80?

Yes, the Bobcat E80 is designed for quick and easy attachment changes using the Bobcat X-Change system.

Does the E80 come with an enclosed cab option?

Yes, the Bobcat E80 offers an enclosed cab option that provides a comfortable and safe operating environment.

What is the swing speed of the E80 excavator?

The swing speed of the Bobcat E80 is approximately 9.3 revolutions per minute (RPM).

Does the E80 come with advanced safety features?

Yes, the Bobcat E80 is equipped with various safety features such as ROPS (Roll-Over Protective Structure), FOPS (Falling Object Protective Structure), and travel alarms.

Similar Posts