John Deere 120r Loader Specs, Features, Width, Lift Capacity, Price & Review

The John Deere 1023E, 1025R, 2025R, and 2026R tractors are compatible with the John Deere 120R Loader.

The hydraulic cylinders for the boom and bucket on the front end loader are double-acting, and the system is non-self-leveling.

The John Deere 120R Loader has a breakout force (bucket on the ground) of 890 kg and a lift capacity (at pivot pin) of 364 kg (803 lbs) up to a height of 1830 mm (72 in) (1963 lbs).

A maximum dump angle of 40.5 degrees corresponds to complete clearance of 1300 mm (51.3 in).

The highest point of the lift takes 3.7 seconds to reach, and emptying the bucket takes 4.1 seconds.

John Deere 120R Loader customers can choose from two basic material bucket sizes: 54″ (1350 mm) with a capacity of 0.26 m3; and 49″ (1250 mm) with an equivalent rating of 0.18 m3 (6.4 cu. feet).

Also Check

John Deere 120r

John Deere 120r Price


John Deere 120r Loader Weight

Base weight is 283.88 kg and Bucket weight is 83 kg 183 lb

John Deere 120r Loader Lift Capacity

Measured at pivot (W) 434 kg 957 lb Measured at 500 mm ahead of pivot (X) 312 kg 688 lb

John Deere 120r Key Fact

Compatible with tractors 1023E, 1025R, and 2025RUup to 553 lb Quik-Park stands for simple connection and removal (251 kg) lifted weights

An optional mechanical self-leveling (MSL) loader with a lift capacity of up to 726 lb (330 kg)

John Deere 120r Features

Yanmar Tier IV engine with Hydro gearbox and TwinTouchTM pedals for ease of use, power and economical.
Mower decks with 60-inch AutoConnectTM 7-Iron Drive-over

John Deere 120r Specs


Tractor models John Deere 1023E, 1025R, 2025R, 2026R
Front tire sizes 23×8.50-12 6PR R4 CL
Rear tire sizes 12.00-16.5 6PR R4 CL
Tractor wheelbase 1600 mm (63.5 in)
Hydraulic pump capacity 26.5 lpm (6.9 gpm)
Hydraulic pressure 148 bar (2146 psi)


Loader Model JD 120R Loader
Leveling System Non-Self Leveling
Weight 284 kg (625 lbs)


Width 1250 mm (49 in)
Height 437 mm (17.2 in)
Depth 463 mm (18.2 in)
Struck capacity 0.148 m3 (5.2 cu.ft)
Heaped capacity 0.182 m3 (6.4 cu.ft)
Weight 51.0 kg (112 lbs)


Width 1350 mm (53.6 in)
Height 513 mm (20.2 in)
Depth 588 mm (23.1 in)
Struck capacity 0.22 m3 (7.8 cu.ft)
Heaped capacity 0.26 m3 (9.3 cu.ft)
Bucket weight 83 kg (183 lbs)


Maximum lift height at pivot pin 1830 mm (72 in)
Clearance with bucket dumped 1300 mm (51.3 in)
Overall length 2890 mm (113.7 in)
Digging depth 86 mm (3.4 in)
Reach at maximum height 700 mm (27.5 in)
Reach at ground level (bucket level) 1290 mm (50.7 in)
Bucket dump angle 40.5 deg
Bucket rollback angle 30.1 deg


Lift capacity to full height at pivot pin 364 kg (803 lbs)
Lift capacity to full height at 20″ (500 mm) ahead of the pivot pin 251 kg (553 lbs)
Lift capacity to 59″ (1500 mm) height at pivot pin 434 kg (957 lbs)
Lift capacity to 59″ (1500 mm) height at 20″ (500 mm) ahead of the pivot pin 312 kg (688 lbs)
Boom breakout force at pivot pin 890 kg (1963 lbs)
Boom breakout force at 20″ (500 mm) ahead of the pivot pin 606 kg (1335 lbs)
Bucket rollback force at maximum height 648 kg (1428 lbs)
Bucket rollback force at 59″ (1500 mm) lift height 777 kg (1713 lbs)
Bucket rollback force at the ground-level line 753 kg (1659 lbs)


Loader raise 3.7 sec.
Loader lower 2.6 sec.
Bucket dump 4.1 sec.
Bucket rollback 2.5 sec.

Your tractors can become more adaptable with the John Deere 120R loader, which is compatible with the 1023E, 1025R, and 2025R tractors.

Despite having a compact footprint, this loader can lift up to 754 lbs. for a distance of 72 inches. Additionally, the 120R incorporates Quik-Park supports that are simple to install and remove, saving you time between activities.

Visit the C & B Operations website to learn more about the 120R loader and learn how to purchase one for yourself.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

eleven + twelve =