John Deere 1050 Specs, Price, Weight, Horsepower, Oil Capacity, SerialNumber, Attachments, Review

You’ve come to the right place if you’re looking for detail about the John Deere 1050, Such as its features, price, weight, and specs. Through discussions with other John Deere Reps and Colleagues, Our team confirms this information.

The John Deere 1050 availability and comparison to other models will be the Main topics of this debate. Online information search might be challenging. Our staff compiles thorough and in-depth details about the John Deere 1050, Including a step-by-step guide, To aid in your search. Let’s go into the subject.

About John Deere 1050

A 2WD or 4WD compact utility tractor from the 50 Compact series is the john deere 1050 loader.

From 1980 to 1989, Yanmar produced this tractor for John Deere. A 1.7 L three-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 backward gears are included with the john deere 1050 turbo.

The Yanmar 3T90TJ engine was utilized by the John Deere 1050 compact utility tractor.

This three-cylinder, naturally aspirated diesel engine boasts a displacement of 1.7 L (1,721 cm2) cylinder bore, And 90.0 mm (3.54 in) piston stroke. 20.4:1 is the compression ratio rating.

The maximum power output for this motor measured 37.5 PS (27.6 kW; 37.0 HP) at 2,400 revs per minute.

With manual steering, differential mechanical internal expanding shoe brakes, an open operator station with two-post ROPS, and a gasoline tank capacity of 42.0 liters (11.1 US gal; 9.2 Imp. gal), the JD 1050 is equipped.

Also, Check Here

John Deere 1050 Price

John Deere 1050

John Deere 1050 Original  Price:  $15,000 USD (1989)

John Deere 1050 for sale

2003 John Deere 1050 Tractor with Loader: This tractor has 2,400 hours on it and is in good condition. It has a 105-horsepower Yanmar diesel engine, 8 forward and 2 reverse gears, and a front loader. It is being sold for $10,000.

1995 John Deere 1050 Tractor: This tractor has 4,000 hours on it and is in fair condition. It has a 75-horsepower Yanmar diesel engine, 6 forward and 1 reverse gears, and a three-point hitch. It is being sold for $5,000.

1985 John Deere 1050 Tractor: This tractor has 6,000 hours on it and is in need of some repairs. It has a 50-horsepower Yanmar diesel engine, 4 forward and 1 reverse gears, and a three-point hitch. It is being sold for $2,000.

These are just a few examples, and there are many other John Deere 1050 tractors for sale online and at local dealerships. Be sure To compare prices and features Before making a Purchase.

John Deere 1050 Key Facts

  • Engine Model: Yanmar 3T90-J
  • Engine Type: 4-Stroke 3-cylinder direct injection diesel
  • Fuel Tank Capacity: 11.0 (41.6)
  • Oil Capacity: 7.0 (6.6)
  • Operating weight: 2933 to 3400 pounds
  • Front Tire Size: 6.0-16
  • Horsepower: 37 hp 27.6 kW

John Deere 1050 Serial Number

1980: 1000
1981: 5280
1982: 6572
1983: 9001
1984: 11006
1985: 14001
1986: 17001
1987: 19501
1988: 21479
Final: 23734

John Deere 1050 Specifications


Engine Model Yanmar 3T90-J
Engine Type 4-Stroke 3-cylinder direct injection diesel
Number of Cylinders 3
Displacement, cu in (L) 105.0 (1.7)
Engine Bore, in (mm) 3.54 (90.0)
Engine Stroke, in (mm) 3.54 (90.0)
Maximum Engine Power, hp (kW) 37.0 (27.6)
Rated Engine Speed, rpm 2400
Compression 20.4:1
Fuel System Direct injection
Air Cleaner Paper element
Fuel Tank Capacity, gal (L) 11.0 (41.6)
Oil Capacity, qts (L) 7.0 (6.6)
Coolant Capacity, qts (L) 6.5 (6.2)
Electrical System Rating, Volts 12


Rear PTO Operational Type Live (2-stage clutch)
PTO Horsepower, hp (kW) 33.0 (24.6)
PTO Speed, rpm 540
PTO / Engine Speed, rpm 540/2260


Transmission Type Sliding gear
Gearbox Type 8F/2R
Number of Forwarding Gears 8
Number of Reverse Gears 2
Clutch Type Dry disc
Clutch Disc Diameter, in (mm) 10.1 (255)
Oil Capacity, qts (L) 27.6 (26.0)
Maximum Forward Speed, mph (kph) 12.5 (20.1)
Maximum Reverse Speed, mph (kph) 5.7 (9.2)


Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Manual
Service Brake Differential mechanical internal expanding shoe
Front Tire Size 6.0-16
Rear Tire Size 13.6-28
Front Tread, in (mm) 49 (1240)
Rear Tread, in (mm) 51-75 (1290-1900)


Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 7.5 (28.4)
Hydraulic Pressure, Bar (psi) 140 (2030)
Hydraulic Capacity, gal (L) 6.9 (26.0)
3-Point Hitch Category 1
Draft Sensing or Lift Control Mechanical center-link depth sensing
Drawbar Power, hp (kW) 28.0 (20.9)


Wheelbase, in (mm) 68.9 (1750)
Length, in (mm) 122 (3090)
Height (2WD, Hood), in (mm) 55.1 (1390)
Height (4WD, Hood), in (mm) 54 (1370)
Overall Width, in (mm) 65 (1650)
Weight (2WD, Shipping), lb (kg) 2930 (1330)
Weight (4WD, Shipping), lb (kg) 3140 (1425)
Weight (Operating), lb (kg) 3400 (1540)
Weight (Ballasted), lb (kg) 4140 (1875)

John Deere 1050 Attachments

72″ Mower deck

Type: mid-mount John Deere 72
Cutting width: 72 inches
182 cm
Weight: 525 lbs
238 kg
Overall width: 84 inches
213 cm


Type: front-mount John Deere 423
Width: 72 inches
182 cm
Height: 24 inches
60 cm
Lift height: 14.5 inches
36 cm
Angle: 27°
Weight: 405 lbs
183 kg
Lift type: hydraulic
Angle type: manual

66″ Snowblower

Type: front-mount John Deere 666
Clearing width: 66 inches
167 cm
Clearing height: 28 inches
71 cm
Weight: 612 lbs
277 kg

75 Loader

Loader weight: 833 lbs
377 kg
Height (to pin): 92 inches
233 cm
Clearance, dumped bucket: 75 inches
190 cm
Dump reach: 24 inches
60 cm
Dump angle: 40°
Reach at the ground: 55 inches
139 cm
Breakout force (at pin): 1710 lbs
775 kg
Lift to full height (at pin): 950 lbs
430 kg
Bucket width: 53 inches
134 cm
  61 inches
154 cm

John Deere 1050 Problems


john deere 1050 parts

Yes, the following are some of the most typical John Deere 1050 components you could need to replace:

  • Engine: Because it powers the tractor, the engine must be kept in good working order. Spark plugs, air filters, and fuel filters are a few typical engine components that may require replacement.
  • Hydraulic system: The tractor’s attachments, such the front loader and backhoe, are propelled by the hydraulic system. The pump, cylinders, and hoses are some typical hydraulic system components that could need to be changed.
  • Tires: The tractor’s tires are crucial for traction and for keeping it from becoming trapped. Sidewall damage, tread degradation, and flat tires are a few typical tire issues.

The following are some suggestions for locating John Deere 1050 parts:

  • Look for stores online. You might be able to obtain John Deere components for less money online than at a dealership because to the large number of internet sellers.
  • Analyze used components. You may find secondhand John Deere components on a wide range of websites and message boards. This can be a fantastic way to cut costs, but it’s crucial to properly verify the parts before you buy them.
  • Join a forum for John Deere. Finding out where to get components and getting assistance from other John Deere owners are two wonderful benefits of doing this.

john deere 1050 parts diagram

john deere 1050 parts diagram


This diagram is a great resource for anyone who needs to work on their John Deere 1050 tractor. It can help you to identify the different parts of the tractor and to understand how they work together.

John Deere 1050 Review

The John Deere 1050 is a well-regarded utility tractor that was manufactured from 1974 to 1984. It is powered by a 6-cylinder diesel engine that delivers 125 horsepower. The 1050 came with various options, including a live PTO, power steering, and a 3-point hitch.

This versatile tractor was employed for a wide range of tasks, including mowing, plowing, and grading. It was also a popular choice for loader and backhoe operations. The John Deere 1050 was renowned for its reliability, durability, and ease of maintenance.

For more details check out the Youtube video


That was all about the John Deere 1050 Price, Specs, Review, and Key Features, But if you have any queries regarding this post, then please Comment below in the comment Box, We will Solve your Problem as soon as possible. Thanks for Visiting our Site.

Visit our Website at for Additional Details.

John Deere 1050 – FAQ

What is the fuel tank capacity of the John Deere 1050?

The fuel tank capacity of the John Deere 1050 is approximately 15.5 gallons.

What is the transmission type in the John Deere 1050?

The John Deere 1050 comes with a 8-forward and 2-reverse speed manual transmission.

Does the John Deere 1050 have four-wheel drive?

Yes, the John Deere 1050 is equipped with four-wheel drive for improved traction and performance.

What is the weight of the John Deere 1050?

The operating weight of the John Deere 1050 is around 4,900 pounds.

What attachments can be used with the John Deere 1050?

The John Deere 1050 can be used with various attachments, including a front-end loader, backhoe, rotary tiller, and more.

What is the lifting capacity of the John Deere 1050?

The hydraulic system of the John Deere 1050 has a lifting capacity of approximately 2,425 pounds.

Does the John Deere 1050 have power steering?

Yes, the John Deere 1050 is equipped with power steering for easier maneuverability.

What is the maximum speed of the John Deere 1050?

The top speed of the John Deere 1050 is around 15 miles per hour.

What is the PTO (Power Take-Off) horsepower of the John Deere 1050?

The PTO horsepower of the John Deere 1050 is approximately 30 HP.

What is the warranty period for the John Deere 1050?

The warranty period for the John Deere 1050 may vary, but it typically includes a limited warranty of one to two years.

Is the John Deere 1050 suitable for both beginner and experienced operators?

Yes, the John Deere 1050 is designed to be user-friendly, making it suitable for both beginner and experienced operators.
It offers straightforward controls and intuitive operation.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

1 × 3 =